Farmer-Helper FH-EFGC155 vs TMG TFM60: two 60-inch fixed flails
Both cut about 60 inches at a fixed offset and cost within $109. They differ on power: FH-EFGC155 is rated 25–65 PTO hp, TFM60 30–60 HP with a 50-PTO-hp manual cap. A Kubota L3302 gear fits both; a Kubota L6070 Premium (53 PTO hp) only FH-EFGC155; a John Deere 3033R (24.3 PTO, 32 engine hp) only TFM60, on engine power.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test
Observed U.S. prices, checked November 7, 2026, from the retained product records. Prices were not refreshed for this comparison. Tax, shipping, options and the final seller quote may change the delivered total; these are dated observations, not a live price or stock feed. Open your saved comparison →
The differences that matter.
01
25–65 PTO hp against a 50-PTO-hp cap
FH-EFGC155: 25–65 PTO hp on its page. TFM60: 30–60 HP without a basis on its page, and a 50-PTO-hp maximum in its manual.
FH-EFGC155: the current page states 25–65 PTO hp; the linked Rev 12-12-17 manual gives an 80-PTO-hp ceiling and a minimum-hp footnote that switches to engine hp on hydrostatic tractors.
TMG TFM60: the page lists 650 lb and 30–60 HP; the manual lists 270 kg (about 595 lb), a 50-PTO-hp maximum and a 1,550 mm (about 61-inch) cut.
This comparison reuses the manufacturer evidence retained in the product records reviewed November 7, 2026; product pages were not re-fetched on November 9. Document conflicts are kept visible. No field test or manufacturer-approved tractor pairing is claimed.
FOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.
