SIMILAR MACHINES. DIFFERENT DECISIONS.
Find the differences that matter.
175 focused comparisons. Understand the differences in power, weight and setup before you choose.
Find your comparison
175 comparisons to explore
93 FOCUSED COMPARISONS
Flail mowers
vs
Farmry LFS45 vs WoodMaxx FM-62 Y: 45-inch at $1,699 or 55-inch at $3,630
Small tractor: LFS45 or FM-62 Y?
Read the comparison →
vs
Farmry LFP47 vs WoodMaxx FM-78H: $2,199 fixed Y-blade or $4,620 side-shift hammer
LFP47 or FM-78H?
Read the comparison →
vs
TMG TFMS50 vs WoodMaxx FM-78 Y: 49-inch side shift or 70-inch Y-blade
TFMS50 or FM-78 Y?
Read the comparison →
vs
Land Pride FM2560 vs WoodMaxx FM-62H: 60-inch fixed or 55-inch side shift
FM2560 or FM-62H?
Read the comparison →
vsFarmer-Helper FH-EFGC155 vs WoodMaxx FM-62 Y: 60-inch hammer or 55-inch Y-blade
FH-EFGC155 or FM-62 Y?
Read the comparison →
vsTMG TFM60 vs WoodMaxx FM-62 Y: 60-inch at $2,299 or 55-inch Y-blade at $3,630
Compact tractor: TFM60 or FM-62 Y?
Read the comparison →
vsFarmer-Helper FH-EFGC125 vs WoodMaxx FM-78: 48-inch or 70-inch fixed hammer
Fixed hammer flail: FH-EFGC125 or FM-78?
Read the comparison →vsLand Pride FM2560 vs WoodMaxx FM-78 Y: 60-inch hammer or 70-inch Y-blade
FM2560 or FM-78 Y?
Read the comparison →vs
Farmry LFP47 vs LFS61: 25–45 hp or 15–35 hp
Farmry: LFP47 or LFS61?
Read the comparison →
vsFarmry LFS53 vs WoodMaxx FM-62 Y: $1,799 or $3,630 for a Y-blade flail
Small compact: LFS53 or FM-62 Y?
Read the comparison →vsFarmry LFP47 vs WoodMaxx FM-78 Y: 47-inch or 70-inch Y-blade flail
Y-blade flail: LFP47 or FM-78 Y?
Read the comparison →vsFarmer-Helper FH-EFGC125 vs Land Pride FM2572: 48-inch or 72-inch hammer flail
FH-EFGC125 or FM2572?
Read the comparison →vsTMG TFM60 vs WoodMaxx FM-78 Y: 60-inch or 70-inch fixed flail
Fixed flail: TFM60 or FM-78 Y?
Read the comparison →vsTMG TFMS50 vs WoodMaxx FM-78H: two side-shift flails, 49 or 70 inches
Side-shift flail: TFMS50 or FM-78H?
Read the comparison →vsLand Pride FM2560 vs WoodMaxx FM-62 Y: 60-inch hammer or 55-inch Y-blade
FM2560 or FM-62 Y?
Read the comparison →vsFarmry LFP47 vs Land Pride FM2560: 47-inch Y-blade or 60-inch hammer
LFP47 or FM2560?
Read the comparison →vsTMG TFM60 vs WoodMaxx FM-62: 60-inch at $2,299 or 55-inch at $3,630
Compact tractor: TFM60 or FM-62?
Read the comparison →vsFarmer-Helper FH-EFGC155 vs TMG TFM60: two 60-inch fixed flails
60-inch fixed flail: FH-EFGC155 or TFM60?
Read the comparison →vsFarmer-Helper FH-EFGC125 vs WoodMaxx FM-62: 48-inch or 55-inch fixed hammer
Fixed hammer flail: FH-EFGC125 or FM-62?
Read the comparison →vsFarmry LFS45 vs LFS61: 45-inch or 61-inch on a sub-compact
Sub-compact: LFS45 or LFS61?
Read the comparison →vsFarmry LFP47 vs TMG TFM60: 47-inch or 60-inch at about $2,200
About $2,200: LFP47 or TFM60?
Read the comparison →vsFarmry LFP47 vs WoodMaxx FM-62H: $2,199 fixed Y-blade or $4,230 side-shift hammer
Compact tractor: LFP47 or FM-62H?
Read the comparison →vsTMG TFMS50 vs WoodMaxx FM-62 Y: side shift or Y-blades for grass
Compact tractor: TFMS50 or FM-62 Y?
Read the comparison →vsWoodMaxx FM-62 Y vs FM-62H: fixed Y-blade or side-shift hammer at 55 inches
55-inch WoodMaxx: FM-62 Y or FM-62H?
Read the comparison →vsFarmer-Helper FH-EFGC155 vs WoodMaxx FM-78 Y: 60-inch hammer or 70-inch Y-blade
Compact tractor: FH-EFGC155 or FM-78 Y?
Read the comparison →vsLand Pride FM2560 vs WoodMaxx FM-78H: 60-inch fixed or 70-inch side shift
Mid-size compact: FM2560 or FM-78H?
Read the comparison →vsLand Pride FM2560 vs TMG TFMS50: 60-inch dealer flail or 49-inch side shift
Land Pride FM2560 or TMG TFMS50?
Read the comparison →vsFarmer-Helper FH-EFGC155 vs TMG TFMS50: 60-inch fixed or 49-inch side shift
Width or side shift: FH-EFGC155 or TFMS50?
Read the comparison →vsFarmer-Helper FH-EFGC125 vs TMG TFM60: 48-inch or 60-inch under $2,300
Compact tractor: FH-EFGC125 or TMG TFM60?
Read the comparison →vsFarmer-Helper FH-EFGC155 vs Land Pride FM2560: two 60-inch hammer flails
60-inch hammer flail: FH-EFGC155 or FM2560?
Read the comparison →vsWoodMaxx FM-78 Y vs FM-78H: fixed Y-blade or side-shift hammer at 70 inches
Large compact near 64 PTO hp: FM-78 Y or FM-78H?
Read the comparison →vs
Farmer-Helper FH-EFGC155 vs WoodMaxx FM-54 Y: either side of 25 PTO hp
My tractor has about 25 PTO hp: FH-EFGC155 or FM-54 Y?
Read the comparison →vsFarmry LFS45 vs WoodMaxx FM-54 Y: two light flail mowers for 15-hp-class tractors
My sub-compact has 16 PTO hp and a 700-lb lift: LFS45 or FM-54 Y?
Read the comparison →vsTMG TFMS50 vs WoodMaxx FM-62 hammer: a 50-PTO-hp cap with side shift or a 45-PTO-hp cap fixed
My tractor has 44–47 PTO hp: TFMS50 or FM-62?
Read the comparison →vsLand Pride FM2572 hammer vs TMG TFMS50: a 72-inch fixed cut or 49 inches with side shift
With 40–43 PTO hp and 50 engine hp: FM2572 or TFMS50?
Read the comparison →vsTMG TFMS50 vs WoodMaxx FM-78 hammer: 49 inches with side shift or 70 inches fixed, Category 1 or 2
With 46 PTO hp and a hitch that may be Category 2: TFMS50 or FM-78?
Read the comparison →vsFarmry LFS61 vs WoodMaxx FM-62 hammer: an unstated 15–35 hp range or 24–45 PTO hp near 30
My tractor has about 29 PTO and 40 engine hp: LFS61 or FM-62?
Read the comparison →vsLand Pride FM2584 hammer vs WoodMaxx FM-78 Y: an 84-inch mower on an unstated basis or 70 inches on a PTO range
On a Category 2 tractor with 48 PTO and 58 engine hp: FM2584 or FM-78 Y?
Read the comparison →vsFarmry LFP47 vs WoodMaxx FM-78 hammer: a 45-hp ceiling or a 65-PTO-hp ceiling on a 65-inch tractor
My tractor has 43–46 PTO hp and 55 engine hp: LFP47 or FM-78?
Read the comparison →vsFarmer-Helper FH-EFGC155 hammer vs Land Pride FM2584 hammer: a PTO range or an 84-inch mower at its engine minimum
With 50 engine hp and about 40 PTO hp, FH-EFGC155 or FM2584?
Read the comparison →vsFarmer-Helper FH-EFGC155 hammer vs Land Pride FM2572 hammer: a PTO range or an unstated basis on a 70-inch tractor
With about 40 PTO and 49 engine hp, should I buy FH-EFGC155 or FM2572?
Read the comparison →vsFarmry LFP47 vs WoodMaxx FM-62 hammer: 47 inches of Y-blades or 55 inches of hammers on a narrow tractor
My tractor is 52 inches wide with 31–34 PTO hp: LFP47 or FM-62?
Read the comparison →vsFarmry LFS61 vs WoodMaxx FM-78 hammer: an unstated 35-hp ceiling or a 30-PTO-hp floor
With 30.9 PTO and 39 engine hp, is LFS61 still inside its range, or should I move up to FM-78?
Read the comparison →vsFarmer-Helper FH-EFGC155 hammer vs WoodMaxx FM-78 hammer: 60 or 70 inches under a 72-inch manual limit
My tractor manual allows flail mowers up to 72 inches and 1,100 lb: FH-EFGC155 or FM-78?
Read the comparison →vsLand Pride FM2572 hammer vs WoodMaxx FM-78H hammer: 72 inches on an unstated basis or 70 inches with side shift
With 39.8 PTO and 50 engine hp, should I buy FM2572 or FM-78H for a 6-foot cut?
Read the comparison →vsFarmry LFS61 vs Land Pride FM2572 hammer: two unstated horsepower bases that point opposite ways
My tractor has 32.5 PTO and 42 engine hp: is it inside LFS61 or FM2572?
Read the comparison →vsLand Pride FM2584 hammer vs WoodMaxx FM-62 hammer: 84 inches at 49 hp or 55 inches up to 45
My tractor has 44.7 PTO and 55 engine hp: is FM-62 still inside its range, and is FM2584 inside its?
Read the comparison →vsLand Pride FM2572 hammer vs WoodMaxx FM-62 hammer: 72 inches on an unstated basis or 55 inches on a PTO rule
My tractor has about 36 PTO hp and 48 engine hp: can I run the wider FM2572, or should I buy FM-62?
Read the comparison →vsLand Pride FM2584 hammer vs WoodMaxx FM-78 hammer: 84 or 70 inches on a Category 2 tractor
On a Category 2 tractor with about 52 engine and 42–44 PTO hp, is the 84-inch FM2584 inside its range, or is FM-78 the safer choice?
Read the comparison →vsFarmry LFS61 vs Land Pride FM2560 hammer: a 35-hp ceiling or a 33-hp floor
My tractor has about 34–36 PTO hp and 42 engine hp: is the 61-inch LFS61 still inside its range, or do I need the FM2560?
Read the comparison →vsWoodMaxx FM-78 hammer vs Land Pride FM2560 hammer: a 70-inch PTO-rated flail or a 60-inch dealer flail
For a tractor with about 31 PTO and 41 engine hp, is the wider FM-78 or the dealer-sold FM2560 the better hammer flail?
Read the comparison →vsFarmry LFP47 vs Farmer-Helper FH-EFGC155 hammer: a 47-inch Y-blade flail or a 60-inch hammer flail at 25 hp
For a tractor with about 27–30 PTO hp, should I choose the 47-inch Y-blade LFP47 or the 60-inch hammer FH-EFGC155?
Read the comparison →vsFarmry LFP47 vs Farmer-Helper FH-EFGC125: two four-foot flails, Y-blades or hammers
Between the 47.2-inch LFP47 and the 48-inch FH-EFGC125, which suits my tractor and the material I mow?
Read the comparison →vsWoodMaxx FM-62 Y-blade vs Farmer-Helper FH-EFGC125 hammer: a 55-inch grass flail or a 48-inch hammer flail
For a tractor around 20–25 hp, should I choose FM-62 with Y-blades or the narrower FH-EFGC125 with hammers?
Read the comparison →vsFarmer-Helper FH-EFGC125 vs Land Pride FM2560: choosing a hammer mower
Is a 48-inch base hammer mower sufficient, or do I need the FM2560’s 60-inch cut and specific rotor-and-rake package?
Read the comparison →vsFarmry LFS53 vs WoodMaxx FM-54 Y: wider hammers or a narrower Y mower?
Is the LFS53’s wider hammer swath more useful than the FM-54 Y configuration’s documented PTO band and taller height settings?
Read the comparison →vsLand Pride FM2572 hammer vs TMG TFM60: a wider fixed swath
Is FM2572’s 72-inch cut useful enough for my tractor and route, or does TFM60 cover the job?
Read the comparison →vsWoodMaxx FM-78H vs FH-EFGC155: wider reach or a narrower hammer mower
Does a wider tractor need FM-78H’s 70-inch cut and Category 2 mounting, or will FH-EFGC155’s 60-inch configuration work?
Read the comparison →vsFarmry LFP47 vs WoodMaxx FM-62 Y: narrow mowing or a wider swath
Is LFP47’s narrower cut more useful than the fixed FM-62 Y for my mowing lanes and tractor?
Read the comparison →vsWoodMaxx FM-62H vs FH-EFGC155: hydraulic shift or a wider fixed cut
Do I need FM-62H’s installed side shift, or does FH-EFGC155’s wider fixed hammer cut suit the property?
Read the comparison →vsLand Pride FM2572 hammer vs WoodMaxx FM-78 Y-blades
Should I choose an FM2572 hammer rotor or fixed FM-78 Y mower for grass and occasional woody growth?
Read the comparison →vsWoodMaxx FM-62 Y-blades vs Farmry LFS61: height, width and load
Should I trade six inches of cutting width for the FM-62 Y configuration and its higher cutting-height range?
Read the comparison →vsFarmry LFS61 vs Farmer-Helper FH-EFGC155: nearly the same swath, different requirements
For a roughly five-foot hammer mower, should I examine LFS61 or the fixed FH-EFGC155?
Read the comparison →vsLand Pride FM2560 hammer vs TMG TFM60: the same nominal cutting width
What changes between the nominally 60-inch FM2560 hammer and TMG TFM60?
Read the comparison →vsLand Pride FM2584 vs WoodMaxx FM-78H: hammer configurations
Is an 84-inch fixed-position FM2584 more useful than the 70-inch hydraulic FM-78H?
Read the comparison →vsLand Pride FM2572 vs WoodMaxx FM-78: hammer configurations
For roughly six-foot cutting, does FM2572 offer useful setup choices over fixed FM-78?
Read the comparison →vsLand Pride FM2560 vs WoodMaxx FM-62: hammer configurations
Should I choose a 60-inch two-position Land Pride or a 55-inch fixed WoodMaxx hammer mower?
Read the comparison →vsLand Pride FM2560 vs FM2584: hammer-rotor configurations
When does moving from a 60-inch FM25 directly to an 84-inch model make sense?
Read the comparison →vsLand Pride FM2572 vs FM2584: hammer-rotor configurations
Should a Category I/II tractor use the 72-inch or 84-inch hammer FM25?
Read the comparison →vsLand Pride FM2560 vs FM2572: hammer-rotor configurations
Is the 72-inch FM25 worth the larger mounting and power requirements over the 60-inch model?
Read the comparison →vsWoodMaxx FM-62 Y vs FM-78 Y: width, power and hitch category
Does the 70-inch fixed Y mower justify its higher power floor and different hitch scope?
Read the comparison →vsWoodMaxx FM-62 Y vs FM-54 Y: eight more inches of cut with a higher power floor
Is a 55-inch Y-blade mower the right step up from the 47-inch FM-54 Y?
Read the comparison →vsWoodMaxx FM-78 Y vs hammer: same power band, different blade order
With the same power range and price, which FM-78 blade configuration should I order?
Read the comparison →vsWoodMaxx FM-62 Y vs hammer: different minimum power, same cutting width
Does my power and material call for the FM-62 Y order or the higher-minimum hammer configuration?
Read the comparison →vsFarmer-Helper FH-EFGC155 vs WoodMaxx FM-62 hammer: actual swath and order specification
Does the 60-inch Farmer-Helper cut offer the right tradeoff against the 55-inch fixed WoodMaxx hammer mower?
Read the comparison →vsFarmer-Helper FH-EFGC125 vs TMG TFMS50: fixed placement or hydraulic side shift
Is powered lateral adjustment worth the hydraulic setup when cutting widths differ by only 1 inch?
Read the comparison →vsFarmer-Helper FH-EFGC125 vs WoodMaxx FM-54 Y: blade choice before horsepower
For a similar cutting width, do I need the specified hammer option or the lower-minimum FM-54 Y configuration?
Read the comparison →vsFarmer-Helper FH-EFGC125 vs FH-EFGC155: cut width and body clearance
Does the 60-inch FH-EFGC155 justify its wider body and higher price over the 48-inch FH-EFGC125?
Read the comparison →vsWoodMaxx FM-78 hammers vs TMG-TFM60: fixed width and PTO limits
Does the fixed 70-inch WoodMaxx FM-78 justify its price over the fixed TMG-TFM60?
Read the comparison →vsWoodMaxx FM-62 vs FM-78 hammers: choose a fixed cutting width
Which fixed hammer flail makes sense: the 55-inch FM-62 or 70-inch FM-78?
Read the comparison →vsWoodMaxx FM-78 vs FM-78H hammers: fixed offset or hydraulic adjustment?
When is hydraulic adjustment worth adding to a fixed 70-inch WoodMaxx hammer mower?
Read the comparison →vsWoodMaxx FM-62 vs FM-62H hammers: fixed offset or hydraulic adjustment?
When is hydraulic side shift worth adding to a fixed 55-inch WoodMaxx hammer mower?
Read the comparison →vsWoodMaxx FM-54 Y-blades vs FM-62H hammers: fixed compact mower or hydraulic offset?
Does moving from FM-54 Y-blades to FM-62H hammers suit my tractor and work?
Read the comparison →vsWoodMaxx FM-78H hammers vs TMG-TFM60: wider hydraulic offset or fixed mower?
Do I need FM-78H hydraulic offset or a fixed TFM60 mower?
Read the comparison →vsWoodMaxx FM-62H hammers vs TMG-TFMS50: wider cut or narrower side-shift mower?
Which hydraulic mower suits the job: FM-62H’s wider cut or TFMS50’s narrower deck?
Read the comparison →vsWoodMaxx FM-62H vs FM-78H hammers: 55-inch or 70-inch cut?
Should I choose the 55-inch FM-62H or the 70-inch FM-78H hammer mower?
Read the comparison →vsWoodMaxx FM-54 Y-blades vs Farmry LFP47: two approximately 47-inch fixed flails
Which approximately 47-inch Y-blade mower has the right power and cutting-height requirements?
Read the comparison →vsTMG TFM60 vs TFMS50: wider fixed cut or narrower hydraulic reach?
Is a wider fixed pass or a narrower hydraulic side shift more useful for my property?
Read the comparison →vsFarmry LFP47 vs TMG TFMS50: fixed Y-blades or hydraulic side shift?
Does my mowing job justify hydraulic side shift instead of a fixed deck?
Read the comparison →vsFarmry LFS45 vs LFP47: hammer blades or Y-blades in a compact cut?
Should I choose the lighter LFS45 hammer mower or the LFP47 Y-blade setup?
Read the comparison →vsFarmry LFS61 vs TMG-TFM60: similar swaths, different tractor demands
Are the LFS61 and TMG-TFM60 interchangeable sixty-inch flail mower choices?
Read the comparison →vsFarmry LFS53 vs LFS61: when another eight inches helps
Should I move from the 53-inch Farmry mower to LFS61 for open acreage?
Read the comparison →vsFarmry LFS45 vs LFS53: tire coverage, cutter width and weight
Is the LFS53 worth the extra width over LFS45 for my tractor and access routes?
Read the comparison →82 FOCUSED COMPARISONS
PTO wood chippers
vs
Wallenstein BX52S vs WoodMaxx MX-9900: engine-rated 5-inch or PTO-rated 9-inch
BX52S or MX-9900?
Read the comparison →
vsFarmry WCAP5 PRO vs WoodMaxx MX-9900: 5-inch gravity or 9-inch hydrostatic feed
WCAP5 PRO or MX-9900?
Read the comparison →
vs
Farmer-Helper FH-BX42 vs WoodMaxx MX-8800: $1,683 or $5,890
FH-BX42 or MX-8800?
Read the comparison →vsWallenstein BX52S vs WoodMaxx MX-8800: 5-inch gravity or 8-inch hydrostatic feed
BX52S or MX-8800?
Read the comparison →
vs
Woodland Mills TFG55 vs WoodMaxx WM-8M: 346-lb sub-compact chipper or 775-lb 8-inch
Sub-compact or compact: TFG55 or WM-8M?
Read the comparison →vsFarmer-Helper FH-BX42 vs WoodMaxx WM-8M: 4-inch gravity or 8-inch mechanical feed
FH-BX42 or WM-8M?
Read the comparison →vs
Farmer-Helper FH-BX42 vs Woodland Mills WC68: $1,683 gravity or $3,450 hydraulic feed
Compact tractor: FH-BX42 or WC68?
Read the comparison →vsFarmry WCAP5 PRO vs WoodMaxx MX-8800: $1,899 or $5,890 for compact-tractor chipping
Compact tractor: WCAP5 PRO or MX-8800?
Read the comparison →vsWallenstein BX52S vs WoodMaxx WM-8M: 5-inch gravity or 8-inch mechanical feed
Compact tractor: BX52S or WM-8M?
Read the comparison →
vs
Farmer-Helper FH-BX62S vs WoodMaxx WM-8H: 6.5-inch gravity or 8-inch hydraulic feed
Compact tractor at 25–45 PTO hp: FH-BX62S or WM-8H?
Read the comparison →
vsFarmry WCAP5 vs WoodMaxx WM-8H: $1,698 gravity feed or $4,095 hydraulic feed
Budget 5-inch or full-featured 8-inch: WCAP5 or WM-8H?
Read the comparison →vsWoodMaxx MX-8800 vs WM-8M: hydrostatic or mechanical feed at 8 inches
WoodMaxx 8-inch: MX-8800 or WM-8M?
Read the comparison →vsWoodland Mills TFG55 vs WC68: gravity feed or hydraulic feed between 20 and 30 PTO hp
Woodland Mills on a 20–30 PTO hp tractor: TFG55 or WC68?
Read the comparison →vs
Wallenstein BX52S vs Woodland Mills WC46: engine-rated 5-inch or PTO-rated 4-inch
Compact tractor: BX52S or WC46?
Read the comparison →vsFarmry WCAP5 PRO vs Woodland Mills WC46: 5-inch gravity or 4-inch hydraulic feed
Small tractor at 15–30 PTO hp: WCAP5 PRO or WC46?
Read the comparison →vsFarmer-Helper FH-BX62S vs Woodland Mills WC46: gravity feed or hydraulic feed between 25 and 30 PTO hp
Tractor at 25–30 PTO hp: FH-BX62S or WC46?
Read the comparison →vsFarmer-Helper FH-BX62S vs Farmry WCAP5 PRO: 25–45 or 15–45 PTO hp
Compact tractor under 45 PTO hp: FH-BX62S or WCAP5 PRO?
Read the comparison →vsFarmer-Helper FH-BX42 vs Farmry WCAP5: PTO-rated or engine-rated at the same price
Small tractor, about $1,700: FH-BX42 or WCAP5?
Read the comparison →vsFarmry WCAP5 Pro vs Wallenstein BX52S: two 5-inch gravity chippers rated differently
Sub-compact near 18 PTO / 24 engine hp: WCAP5 Pro or BX52S?
Read the comparison →vsWoodMaxx MX-9900 vs WM-8H: 9-inch hydrostatic or 8-inch hydraulic feed
Category 2 tractor over 50 PTO hp: MX-9900 or WM-8H?
Read the comparison →vsFarmry WCAP5 vs WoodMaxx MX-8800: a 45-hp-capped gravity chipper or an 8-inch hydrostatic feed
My tractor is about 45 engine hp: WCAP5 or MX-8800?
Read the comparison →vsFarmry WCAP5 Pro vs WoodMaxx WM-8H: gravity 5-inch or hydraulic 8-inch near 19 PTO hp
With 17 to 20 PTO hp: WCAP5 Pro or WM-8H?
Read the comparison →vsFarmer-Helper FH-BX42 vs WoodMaxx WM-8H: 4-inch gravity or 8-inch hydraulic feed near 19 PTO hp
With about 19 PTO hp: FH-BX42 or WM-8H?
Read the comparison →
vsWallenstein BX36S vs Woodland Mills TFG55: two chippers rated from 12 hp
My tractor has under 15 PTO hp: BX36S or TFG55?
Read the comparison →vsFarmry WCAP5 vs Wallenstein BX52S: two engine-rated 5-inch chippers for small tractors
My tractor is rated about 23 engine hp: WCAP5 or BX52S?
Read the comparison →
vsWallenstein BX72S vs WoodMaxx MX-8800: gravity feed or hydrostatic feed for a large compact tractor
With 60 PTO and 74 engine hp: BX72S or MX-8800?
Read the comparison →vsFarmry WCAP5 vs Woodland Mills TFG55: two light gravity chippers for small tractors
My sub-compact has about 17 PTO and 21 engine hp: WCAP5 or TFG55?
Read the comparison →vsFarmer-Helper FH-BX42 vs Wallenstein BX52S: a PTO-rated 4-inch chipper or an engine-rated 5-inch one
My tractor has about 18 PTO and 24 engine hp: FH-BX42 or BX52S?
Read the comparison →vsWoodland Mills WC46 vs WoodMaxx WM-8H: a light 4-inch chipper or an 8-inch one at its 19-hp floor
My sub-compact has 19 PTO hp and a 700-lb lift: WC46 or WM-8H?
Read the comparison →vsFarmry WCAP5 vs Farmer-Helper FH-BX62S: a 45-engine-hp ceiling or a 45-PTO-hp ceiling
My tractor is rated 45 engine hp and about 37 PTO hp: WCAP5 or FH-BX62S?
Read the comparison →vsFarmer-Helper FH-BX62S vs WoodMaxx MX-8800: a 45-PTO-hp ceiling on Category 1 or hydrostatic feed on Category 1 and 2
My tractor has 44.9 PTO hp and may have a Category 2 hitch: FH-BX62S or MX-8800?
Read the comparison →vsWoodMaxx WM-8M vs MX-9900: fixed mechanical feed or a 9-inch hydrostatic-feed chipper
On a Category 2 tractor with about 48 PTO hp: WM-8M or MX-9900?
Read the comparison →vsFarmry WCAP5 Pro vs Woodland Mills WC68: gravity feed to 45 PTO hp or hydraulic feed with a 40-hp full-feed line
My tractor has 36–42 PTO hp: WCAP5 Pro or WC68?
Read the comparison →vsFarmry WCAP5 vs WoodMaxx WM-8M: a 45-engine-hp ceiling or a 19-PTO-hp floor
My tractor has about 45 engine and 36 PTO hp: WCAP5 or WM-8M?
Read the comparison →vsFarmry WCAP5 vs Wallenstein BX72S: two engine ranges with a 5-hp gap between them
My tractor is rated 45–50 engine hp: WCAP5 or BX72S?
Read the comparison →vs
Farmry WCAP5 vs Woodland Mills WC88: a 45-engine-hp ceiling or a 35-PTO-hp floor
My tractor has 45 engine hp and 34–38 PTO hp: WCAP5 or WC88?
Read the comparison →vsFarmry WCAP5 Pro vs Wallenstein BX72S: a 45-PTO-hp ceiling or a 50-engine-hp floor
With about 45 PTO and 57 engine hp, is WCAP5 Pro still inside, or should I buy BX72S?
Read the comparison →vsFarmry WCAP5 Pro vs Woodland Mills WC88: a 45-PTO-hp ceiling or a 35-PTO-hp floor
My tractor has 35–41 PTO hp: the small WCAP5 Pro or the 8-inch WC88?
Read the comparison →vsFarmry WCAP5 vs Woodland Mills WC46: an engine-rated 5-inch gravity chipper or a PTO-rated 4-inch hydraulic-feed chipper
With 28 PTO and 37 engine hp, should I buy the larger-opening WCAP5 or the hydraulic-feed WC46?
Read the comparison →vsWallenstein BX72S vs WoodMaxx WM-8H: an engine-rated 7-inch gravity chipper or a PTO-rated 8-inch hydraulic-feed chipper
My tractor has 41.3 PTO hp and about 50 engine hp, gross or net: BX72S or WM-8H?
Read the comparison →vsWallenstein BX72S vs Woodland Mills WC68: a 50-engine-hp floor or a 40-PTO-hp full-feed condition
With 50 engine and 39.8 PTO hp, should I step up to BX72S or stay with WC68?
Read the comparison →vsWoodland Mills WC68 vs WoodMaxx WM-8M: a 6-inch hydraulic feed or an 8-inch mechanical feed
My tractor has about 33 PTO hp, short of WC88’s 35: should I buy the 6-inch WC68 or the 8-inch WM-8M?
Read the comparison →vsFarmer-Helper FH-BX62S vs Wallenstein BX72S: a 45-PTO-hp ceiling or a 50-engine-hp floor
With 44.7 PTO and 55 engine hp, should I buy FH-BX62S, which I am just inside, or step up to BX72S?
Read the comparison →vsFarmry WCAP5 vs Woodland Mills WC68: an engine-rated 5-inch chipper or a PTO-rated 6-inch chipper
With about 48 engine and 37 PTO hp, is the lower-priced WCAP5 still inside its range, or do I need WC68?
Read the comparison →vsWallenstein BX72S vs WoodMaxx WM-8M: Category 2 chippers for a 50-hp tractor
On a Category 2 tractor with about 52 engine and 42–44 PTO hp, is BX72S or WM-8M the better chipper?
Read the comparison →vsWoodland Mills WC88 vs WoodMaxx WM-8M: two 8-inch chippers, 35 PTO hp apart at the minimum
With about 34–36 PTO hp, should I buy WC88 or the lower-minimum WM-8M?
Read the comparison →vsWallenstein BX52S vs Woodland Mills WC88: a 5-inch engine-rated gravity chipper or an 8-inch hydraulic-feed chipper
On a tractor with about 38 PTO and 48 engine hp, should I buy the 5-inch BX52S or step up to the 8-inch WC88?
Read the comparison →vsWoodMaxx MX-9900 vs Farmer-Helper FH-BX62S: two 25-PTO-hp chippers, $4,598 apart
With 26–30 PTO hp, is MX-9900’s hydrostatic feed and 9-inch opening worth almost three times FH-BX62S’s price?
Read the comparison →vsWoodland Mills WC68 vs Farmer-Helper FH-BX62S: hydraulic 6-inch feed or a gravity-fed 6.5 × 12-inch opening
With about 25–30 PTO hp, is WC68’s hydraulic feed worth $1,058 more than FH-BX62S’s gravity feed and larger opening?
Read the comparison →vsWoodland Mills WC46 vs WoodMaxx WM-8M: a 4-inch hydraulic feed or an 8-inch mechanical feed
On a small tractor, should I buy the 4-inch WC46 with variable hydraulic feed or the 8-inch WM-8M with a fixed mechanical feed?
Read the comparison →vsWallenstein BX52S vs WoodMaxx WM-8H: gravity or hydraulic rollers?
Would adjustable roller feed help my material pile enough to justify the hydraulic system and larger load review?
Read the comparison →vsFarmry WCAP5 PRO vs WoodMaxx WM-8M: gravity or mechanical feed?
Do I want gravity feed for smaller branches or a powered mechanical roller for a larger material mix?
Read the comparison →vsWoodland WC88 vs Farmer-Helper FH-BX62S: powered feed or gravity feed
Should I choose WC88’s controllable infeed for larger material, or FH-BX62S’s direct-drive gravity system?
Read the comparison →vsFarmry WCAP5 vs Wallenstein BX36S: capacity and mounting choices
Is WCAP5’s larger opening useful for my branches, or does BX36S suit a smaller tractor and work area?
Read the comparison →vsWoodland WC68 vs WoodMaxx MX-9900: capacity and delivery setup
Does my work justify MX-9900’s larger opening, or is WC68 the more suitable powered-feed option?
Read the comparison →vsFarmry WCAP5 PRO vs Farmer-Helper FH-BX42: opening shape and storage
Should I choose WCAP5 PRO or FH-BX42 for mixed branches and limited storage space?
Read the comparison →vsWallenstein BX52S vs Farmer-Helper FH-BX62S: capacity and storage
Is the larger FH-BX62S opening worth the storage and load questions compared with BX52S?
Read the comparison →vsFarmry WCAP5 PRO vs Woodland TFG55 PTO: two 5-inch gravity chippers
Should I choose WCAP5 PRO or TFG55 PTO for a small tractor and a mixed branch pile?
Read the comparison →vsWoodMaxx MX-8800 vs Woodland Mills WC88: two 8-inch feed systems
Does MX-8800 or WC88 make more sense for my tractor and recurring brush work?
Read the comparison →vsWallenstein BX36S vs Farmer-Helper FH-BX42: small gravity-feed chippers
Which small gravity-feed chipper better suits my tractor and storage space: BX36S or FH-BX42?
Read the comparison →vsWallenstein BX72S vs WoodMaxx MX-9900: gravity feed versus a larger hydrostatic option
Is MX-9900’s larger opening and operator-controlled hydrostatic feed useful for the intended wood and power?
Read the comparison →vsWallenstein BX72S vs Woodland WC88: seven-inch gravity feed or eight-inch hydraulic feed
Does eight-inch material and controlled feed make WC88 a better candidate than BX72S for this tractor?
Read the comparison →vsWallenstein BX52S vs BX72S: the step from five-inch to seven-inch gravity feed
Does the BX72S’s larger material rating and taller discharge justify its higher engine-power minimum?
Read the comparison →vsWallenstein BX52S vs Woodland TFG55 PTO: two five-inch gravity chippers with different openings
When both carry a 5-inch label, should opening geometry, drive layout or service access decide?
Read the comparison →vsWallenstein BX52S vs Woodland WC68: five-inch gravity feed or six-inch hydraulic control
Does a 6-inch diameter requirement or adjustable feed justify moving from BX52S to WC68?
Read the comparison →vsWallenstein BX36S vs Woodland WC46: fixed gravity feed or controlled hydraulic feed
Is the WC46’s adjustable hydraulic feed and folding chute worth considering over the BX36S fixed gravity hopper?
Read the comparison →vsWallenstein BX36S vs BX52S: branch size and folding storage
Does the BX52S opening and folding hopper solve a need that the smaller BX36S cannot?
Read the comparison →vsFarmer-Helper FH-BX62S vs WoodMaxx WM-8M: gravity draw or a mechanical roller
Do I want gravity draw or a fixed-speed powered feed roller without a hydraulic feed circuit?
Read the comparison →vsFarmer-Helper FH-BX42 vs Woodland TFG55 PTO: two gravity-feed layouts
Which gravity-feed design better suits the opening, blade service and power range I need?
Read the comparison →vsFarmer-Helper FH-BX42 vs Woodland WC46: gravity feeding or hydraulic control
Within the 4-inch class, is adjustable powered feeding worth the higher price and hydraulic service work?
Read the comparison →vsFarmer-Helper FH-BX42 vs FH-BX62S: opening size and storage footprint
Does the BX62S opening justify its higher power minimum and larger folded envelope?
Read the comparison →vsWoodMaxx MX-8800 vs WM-8H: hydrostatic feed system or dual hydraulic rollers?
What does the MX-8800 change over the WM-8H when both advertise an 8-inch capacity?
Read the comparison →vsWoodMaxx MX-9900 vs Woodland Mills WC88: 9-inch opening and different power conditions
Should the MX-9900’s 9-inch opening or the WC88’s power documentation guide a larger PTO chipper purchase?
Read the comparison →vsWoodMaxx MX-8800 vs Woodland Mills WC68: larger throat or defined compact range?
Does an 8-inch MX-8800 throat offer useful value over the 6-inch WC68 on a 20-plus-PTO-hp tractor?
Read the comparison →vsWoodMaxx MX-8800 vs MX-9900: opening size and service access
Are the MX-9900’s larger opening and folding service layout worth the step up from MX-8800?
Read the comparison →vsWoodMaxx WM-8H vs Woodland Mills WC88: two approaches to an eight-inch chipper
How do two eight-inch hydraulic chippers differ in power conditions and setup?
Read the comparison →vsWoodMaxx WM-8H vs Woodland Mills WC68: throat size, feed layout and documented limits
Does an eight-inch throat address a real need beyond the WC68’s six-inch capacity?
Read the comparison →vsWoodMaxx WM-8H vs WM-8M: adjustable hydraulic feed or fixed mechanical feed?
Is adjustable hydraulic feed worth the extra cost over fixed mechanical feed?
Read the comparison →vsWoodland Mills WC68 vs WC88: six-inch or eight-inch hydraulic feed?
Is the WC88’s larger throat useful enough to justify its power and weight requirements?
Read the comparison →vsWoodland Mills WC46 vs TFG55 PTO: hydraulic feed or a lighter chipper
Should I prioritize hydraulic feeding on WC46 or the lower weight of TFG55 PTO?
Read the comparison →vsFarmry WCAP5 vs WCAP5 PRO: what the PRO designation changes
Does WCAP5 PRO justify its extra cost, and do both versions accept the same tractor?
Read the comparison →vsWoodland Mills WC46 vs WC68: power, branch size and lifting weight
Should I buy the WC46 or WC68 when my compact tractor is near 20 PTO hp?
Read the comparison →Want your own combination?
Add up to three products to the saved comparison and select your exact tractor to see the initial specification screen.