Farmer-Helper FH-EFGC155 vs TMG TFMS50: 60-inch fixed or 49-inch side shift
FH-EFGC155 cuts 11 inches wider; TFMS50 shifts about 14 inches hydraulically for fence lines and ditches. A Kubota L3302 gear fits both; a Kubota L6070 Premium (53 PTO hp) only FH-EFGC155; a John Deere 3033R (24.3 PTO, 32 engine hp) only TFMS50, on engine power.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test
Observed U.S. prices, checked November 7, 2026, from the retained product records. Prices were not refreshed for this comparison. Tax, shipping, options and the final seller quote may change the delivered total; these are dated observations, not a live price or stock feed. Open your saved comparison →
The differences that matter.
01
Fixed 60-inch against 49-inch side shift
FH-EFGC155 cuts 60 inches at a fixed offset. TFMS50 cuts 49 inches and shifts about 14 inches with a hydraulic cylinder and two hoses.
TFMS50 needs a rear remote; FH-EFGC155 covers more ground per pass.
FH-EFGC155: the current page states 25–65 PTO hp; the linked Rev 12-12-17 manual gives an 80-PTO-hp ceiling and a minimum-hp footnote that switches to engine hp on hydrostatic tractors.
TMG TFMS50: the page and manual table say 30–60 HP without a basis, while the manual’s p6 caps tractor power at 50 PTO hp.
This comparison reuses the manufacturer evidence retained in the product records reviewed November 7, 2026; product pages were not re-fetched on November 9. Document conflicts are kept visible. No field test or manufacturer-approved tractor pairing is claimed.
FOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.
