THE TRADEOFFS, EXPLAINED

Farmry WCAP5 vs Farmer-Helper FH-BX62S: a 45-engine-hp ceiling or a 45-PTO-hp ceiling

WCAP5 and FH-BX62S both stop at 45, but on different figures. Farmry’s 45 is engine horsepower; Betstco’s is PTO horsepower. A New Holland Boomer 45, at 45 gross hp and 36.0–38.2 PTO hp, is exactly on WCAP5’s ceiling and 6.8–9.0 under FH-BX62S’s. On a tractor rated a little more than 45 engine hp, only FH-BX62S stays in range.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Farmry WCAP5 PTO wood chipper

Farmry

WCAP5

15–45 engine hp · 5″ max. chip diameter

$1,698 checked November 6, 2026

Check current price at Farmry
Farmer-Helper FH-BX62S PTO wood chipper

Farmer-Helper

FH-BX62S

25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained · 6.5″ Manual feed-opening short side, inches

$2,392 checked November 7, 2026

Check current price at Farmer-Helper

START WITH THE DECISION

Consider WCAP5 on tractors up to 45 engine hpShortlist WCAP5 when the tractor is clearly inside 15–45 engine hp, or Farmry confirms a tractor rated exactly 45, and branches are mostly under 5 inches fresh.

Consider FH-BX62S on tractors from 25 to 45 PTO hpShortlist FH-BX62S when the tractor’s PTO rating is between 25 and 45 hp, the hitch is Category 1 and larger material is common.

Read the evidence behind the choice ↓

Observed U.S. seller prices, checked November 7, 2026 (FH-BX62S), from the retained product records. Prices were not refreshed for this comparison. Tax, shipping, options and the final seller quote may change the delivered total; these are dated observations, not a live price or stock feed. The retained WCAP5 record does not carry a dated price observation, so no WCAP5 price is shown; check Farmry’s current listing. Open your saved comparison →

The differences that matter.

01

Engine 45 against PTO 45

Farmry’s WCAP5 manual specifies 15–45 engine hp. Betstco’s current FH-BX62S manual specifies 25 PTO hp minimum and 45 PTO hp maximum; its product and series pages also mention 45, 50+ and 75 HP in other contexts.

A tractor with 45 engine and 37 PTO hp is at WCAP5’s ceiling and well inside FH-BX62S. One with 50 engine and 42 PTO hp is outside WCAP5 and inside FH-BX62S.

02

5 inches against a 6.5 × 12-inch opening

WCAP5 has a 5 × 9-inch opening; Farmry’s page gives 5 inches fresh and 4 dry. Betstco’s current table lists 6.5 × 12-inch material; its listing and older manual market 7-inch diameter.

FH-BX62S takes larger material; confirm its diameter rating with Betstco.

03

Gravity feed against pinch-and-pull self feed

WCAP5 feeds by gravity. FH-BX62S is a self-feed chipper with direct PTO drive and no hydraulic feed.

Neither has an operator-controlled feed; FH-BX62S pulls material in.

04

412 lb against about 830 lb

WCAP5’s manual lists 412 lb net with the PTO shaft. Betstco’s current manual lists 830 lb net (series page 835).

FH-BX62S is about twice the rear load; both are under a 2,116-lb lift at 24 inches.

05

Category I/II against Category 1

WCAP5’s manual lists Category I/II mounting. FH-BX62S is listed for Category 1.

On a Category 2 tractor, only WCAP5 lists the option.

A CONDITIONAL SHORTLIST

Which direction makes sense?

Consider WCAP5 on tractors up to 45 engine hp

Shortlist WCAP5 when the tractor is clearly inside 15–45 engine hp, or Farmry confirms a tractor rated exactly 45, and branches are mostly under 5 inches fresh.

Check current price at FarmryPrepare questions for the seller

Consider FH-BX62S on tractors from 25 to 45 PTO hp

Shortlist FH-BX62S when the tractor’s PTO rating is between 25 and 45 hp, the hitch is Category 1 and larger material is common.

Check current price at Farmer-HelperPrepare questions for the seller

Keep these source limits with the decision.

WCAP5’s capacity is 5 inches fresh and 4 inches dry on the product page; the manual gives a single 5 × 9-inch opening.

FH-BX62S power text conflicts across the current manual (25–45 PTO hp), product page and series page; weights differ between 830, 835 and 797 lb by source.

This comparison reuses the manufacturer evidence retained in the product records reviewed November 7, 2026; product pages were not re-fetched on November 9. WCAP5 uses the Rev 1.5 manual and current product page; FH-BX62S uses the current product and series pages and the index-linked manual.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Farmry WCAP5 official product pageCompatibility FAQ (15–45 engine HP); capacity FAQ (5 in. fresh, 4 in. dry)
  2. Farmry WCAP5 operator manual, Rev 1.5Printed p19: Engine HP Range 15–45, chipping capacity and 5 × 9-in. opening; p20: mounting (Category I/II), rated 540–1000 rpm, net weight with PTO shaft
  3. Official current FH-BX62S product page: exact SKU, USD price and conflicting power/weight textExact SKU, USD price; conflicting power and weight text
  4. Official FH-BX62S series page: self feed and current-manual linkSelf feed; current-manual link; series weight 835 lb net
  5. Current index-linked Farmer-Helper FH-BX42 & 62 manualPrinted p2 / PDF p3: 25 minimum and 45 Max PTO HP
  6. Product-linked older manual, Revision 1-3-2018, p38
  7. Betstco official manual index