Land Pride FM2572 vs FM2584: hammer-rotor configurations
These two share Category I/II mounting and the same 10-inch fixed right-offset option. The 84-inch model buys a wider swath, not more offset or a higher hammer material rating. Establish whether the additional 12 inches is useful before accepting its higher published minimum and larger envelope.
By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test
FM2572 · hammer rotor: when to shortlist itConsider FM2572 when a 72-inch cut covers the intended work and the 84-inch overall machine fits access better; resolve its 42–80-hp basis and full load first.
FM2584 · hammer rotor: when to shortlist itConsider FM2584 when the additional 12-inch cutting swath has a clear use, a 96-inch overall machine can be transported/stored, and the 49–80-hp basis and full load are verified.
No current manufacturer U.S. price was captured for either hammer configuration. Compare itemized quotes with the exact rotor, rake and shaft options; no price advantage is established. Open your saved comparison →
The differences that matter.
01
Cutting swath and access envelope
FM2572 · hammer rotor: 72-inch working width; 84-inch overall width. FM2584 · hammer rotor: 84-inch working width; 96-inch overall width.
Check cutting coverage and physical passage separately. Working width alone does not establish gate, trailer or storage clearance.
The larger model raises the published minimum. Obtain the power basis before comparing it with a tractor rating; neither range proves full-load performance.
A wider unit changes the full replacement-blade set and rotor assembly. Both share the unresolved 1.5-versus-2-inch hammer capacity labels; blade count is not a durability, finish or throughput test.
The reference figures are configuration-qualified. Obtain complete hammer machine weights rather than subtracting/adding components to create a lift approval.
Consider FM2572 when a 72-inch cut covers the intended work and the 84-inch overall machine fits access better; resolve its 42–80-hp basis and full load first.
Consider FM2584 when the additional 12-inch cutting swath has a clear use, a 96-inch overall machine can be transported/stored, and the 49–80-hp basis and full load are verified.
Manual unit weights describe duckfoot rotors; brochure weight scope is unlabeled and differs for FM2560 and FM2584. No complete hammer operating mass is stated.
Brush rake is optional in assembly instructions/brochure but called standard in one manual table row.
Land Pride’s current FM25 catalog conflicts internally: its Three Blade options feature states 1.5-inch hammer capacity, while its cutting-capacity FAQ and July 1, 2024 manual p39 state 2 inches. Confirm the delivered configuration and material conditions; no settled capacity advantage is claimed.
Manufacturer specifications and linked manuals reviewed November 7, 2026. Exact configuration and unresolved source differences remain part of the decision. No physical product test or confirmed tractor pairing is claimed. Hammer-capacity wording was specifically rechecked November 8, 2026; the remaining specification and price observations retain their stated dates.
FOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.
