THE TRADEOFFS, EXPLAINED

TMG TFM60 vs WoodMaxx FM-62: 60-inch at $2,299 or 55-inch at $3,630

TFM60 cuts 5 inches wider for $1,331 less; FM-62 is WoodMaxx’s fixed hammer flail with a PTO-hp rating. A Kubota L3302 gear fits both; a Massey Ferguson MF 2E.60 gear (48 PTO, 57.3 engine hp) fits only TFM60, under its 50 cap.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Compare these two with my tractor Compare the complete purchase cost →

TMG Industrial

TMG-TFM60

30–60 hp · basis unclear · 60″ cutting width

$2,299 checked November 6, 2026

Check current price at TMG Industrial

Specs & tractor check →

WoodMaxx

FM-62 · Hammer blades

24–45 PTO hp · Hammer blades only · 55″ Cutting width, inches

$3,630 checked November 7, 2026

Check current price at WoodMaxx

Specs & tractor check →

START WITH THE DECISION

Consider TFM60 for width and valueShortlist TFM60 on a 30–50 PTO hp compact when cut width and price lead.

Consider FM-62 for a PTO-rated hammer flailShortlist FM-62 when a clear 24–45 PTO hp rating and WoodMaxx support matter.

Read the evidence behind the choice ↓

Observed U.S. prices, checked November 7, 2026, from the retained product records. Prices were not refreshed for this comparison. Tax, shipping, options and the final seller quote may change the delivered total; these are dated observations, not a live price or stock feed. Open your saved comparison →

The differences that matter.

30–60 HP with a 50 PTO cap against 24–45 PTO hp

TFM60: 30–60 HP without a basis, 50-PTO-hp manual maximum. FM-62 hammer: 24–45 PTO hp.

Tractors at 45–50 PTO hp fit only TFM60.

60-inch against 55-inch

TFM60 cuts 60 inches (about 61 in the manual). FM-62 cuts 55 (65 overall).

TFM60 covers more ground per pass.

650 lb against 774 lb

TMG lists 650 lb (about 595 in the manual); WoodMaxx’s manual gives 774 lb.

Both suit compact lift ratings.

$2,299 against $3,630

Observed November 7, 2026.

TFM60 costs $1,331 less.

A CONDITIONAL SHORTLIST

Which direction makes sense?

Consider TFM60 for width and value

Shortlist TFM60 on a 30–50 PTO hp compact when cut width and price lead.

Check current price at TMG Industrial Prepare questions for the seller

Consider FM-62 for a PTO-rated hammer flail

Shortlist FM-62 when a clear 24–45 PTO hp rating and WoodMaxx support matter.

Check current price at WoodMaxx Prepare questions for the seller

Keep these source limits with the decision.

TMG TFM60: the page lists 650 lb and 30–60 HP; the manual lists 270 kg (about 595 lb), a 50-PTO-hp maximum and a 1,550 mm (about 61-inch) cut.

FM-62 family: the product pages quote a generic 20–45 PTO hp; the manual limits hammer versions to 24–45 and gives 20–45 only for Y-blades.

This comparison reuses the manufacturer evidence retained in the product records reviewed November 7, 2026; product pages were not re-fetched on November 9. Document conflicts are kept visible. No field test or manufacturer-approved tractor pairing is claimed.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

TMG Industrial official U.S. TFM60 product page — Current price, operation weight, width and shipping weightProduct page: 30–60 HP table, 60-in. cut, 650 lb operation weight, price
TMG TFM60/68/72 manual — cover v.2022.11.29; filename 2025.01.09 — p6 power; p11 hitch adjustment; p12 specificationsManual v.2022.11.29: p6 tractor must not exceed 50 PTO HP; 270 kg; 1,550 mm cutting width; handle-operated lateral hitch adjustment
Official FM-62 page: exact hammer variant, price and equipmentProduct page: fixed hammer variant SKU FM-62-0006, 55-in. cut, 65 in. overall, price
WoodMaxx 2025-to-current FM series operator manualPrinted p40 / PDF p41: FM-62 20–45 PTO hp (Y-blades) and 24–45 (hammers), 774 lb, FM-62H 860 lb; FM-78 and FM-78H 30–65 PTO hp, 880 and 968 lb; hydraulic side shift on H models only
WoodMaxx manual index: Models 2025 to current