Wallenstein BX52S vs Farmer-Helper FH-BX62S: capacity and storage
These are both direct-PTO gravity chippers with folding hoppers. BX52S has a 5-inch diameter rating and an engine-horsepower band. FH-BX62S has a larger rectangular opening, a taller discharge and a PTO-horsepower band, but its current manual and sales pages disagree on capacity wording, folded size and weight.
By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test
Consider BX52S when storage and the engine-rated band suit the tractorShortlist BX52S when a 5-inch chipper and its smaller published folded envelope fit the job.
Consider FH-BX62S for bulkier material and a taller dischargeShortlist FH-BX62S when the 6.5 × 12-inch opening and 80-inch discharge address a specific branch-handling or collection need.
Prices shown on the product cards retain their original check dates. Prices were not refreshed for this comparison, and no purchase-cost ranking is made. Request current itemized quotes for the exact configuration, shaft, setup and delivery. Open your saved comparison →
The differences that matter.
01
Use the correct horsepower measurement
BX52S: 22–55 engine hp on the official U.S. page. FH-BX62S: 25–45 PTO hp in the current index-linked manual. Betstco’s page also has generic 25–45 and 30–45 tractor guidance plus inconsistent full-capacity statements.
Do not compare 22 and 25 as equivalent minimums. A tractor must be checked using engine output for BX52S and PTO output for the selected FH-BX62S manual; the conflicting Betstco statements need serial-specific clarification.
Larger opening does not settle the log-diameter claim
BX52S lists a 5-inch chip diameter and 5 × 10-inch housing opening. FH-BX62S’s current manual gives 6.5 × 12-inch material feed capacity, while the product title and description market 7-inch timber. Both specify four reversible rotor knives.
The Betstco opening is a reason to investigate bulkier branch shapes, but it does not verify every 7-inch round log. Neither maker’s minimum-power number proves full-capacity performance; confirm species, moisture, shape and the applicable capacity condition.
BX52S’s page gives 43 × 42 × 66 inches folded and 61 × 64 × 66 open; its manual instead gives an unlabeled 43 × 55 × 66 envelope. FH-BX62S’s current manual gives 56 × 50 × 84 folded, while its product/series pages give 50 × 52 × 74.
BX52S has the smaller published folded envelope, making it worth checking for a lower doorway or limited bay. Obtain a measured delivered-machine drawing before treating either set of dimensions as a storage guarantee.
BX52S manual explicitly supports 540 or 1,000 rpm, with 1,000-rpm shaft Z44506 separately listed on the page. FH-BX62S specifies 540 rpm and an included 05-series shear-protected shaft. Both list Category 1; BX52S additionally names iMatch and quick-hitch compatibility.
For a 1,000-rpm tractor, get the specific BX52S driveline quote. Its table’s range notation does not approve intermediate speeds or the standard shaft at 1,000 rpm. For either machine, included parts and a hitch category still leave tractor-specific shaft geometry to verify.
BX52S lists a 66-inch discharge height; FH-BX62S lists 80 inches. Both current tables list 360° rotation, but Wallenstein’s same-manual feature list says 270° and Betstco’s older product-linked manual also describes a restricted rotation arrangement.
The taller Betstco chute is worth measuring against a high-sided collection container. Height alone does not establish that chips clear a trailer wall or travel far enough; confirm the outlet geometry, permitted directions and actual setup.
The larger machine has a different handling reference
BX52S is listed at 505 lb, without a complete operating-weight inclusion statement. FH-BX62S’s current manual lists 830 lb net and 860 lb shipping; its page says 835 lb total/gross and the series page gives 835 lb net and 915 lb gross.
The published references justify a closer lift and unloading review for FH-BX62S, but they are not like-for-like operating loads. Ask for assembled mass with the shaft, load center, crate mass and unloading arrangements before choosing either.
Consider BX52S when storage and the engine-rated band suit the tractor
Shortlist BX52S when a 5-inch chipper and its smaller published folded envelope fit the job. Its discrete 1,000-rpm option and stated iMatch compatibility may matter to an existing tractor setup, but require the correct shaft, measured dimensions and complete operating load.
Consider FH-BX62S for bulkier material and a taller discharge
Shortlist FH-BX62S when the 6.5 × 12-inch opening and 80-inch discharge address a specific branch-handling or collection need. First reconcile the 7-inch marketing claim, power statements and delivered size; accept neither a capacity guarantee nor a tractor match from the larger label alone.
The current FH-BX table explicitly gives 25–45 PTO hp. Product copy gives 25–45 HP, another specification line gives 30–45 HP, and its full-capacity field says 75 PTO HP; the series field says 45. These cannot be merged into one verified limit or full-capacity promise.
FH-BX62S is marketed as 7-inch capacity but the current table specifies 6.5 × 12-inch material. Its index/series pages link the current manual while the exact product page links Revision 1-3-2018. No model-generation equivalence is assumed.
BX52S page folded dimensions 43 × 42 × 66 differ from manual’s unlabeled 43 × 55 × 66. FH-BX62S manual folded 56 × 50 × 84 differs from page 50 × 52 × 74. Both folding features are documented; exact delivered envelopes remain unresolved.
BX52S and FH-BX62S have unresolved operating-weight inclusions. FH-BX62S current-manual 830/860-lb net/shipping figures differ from product 835-lb total/gross and series 835/915-lb net/gross.
BX52S manual p14 specifies 540 or 1,000 rpm, not every speed between them. Its p40 rotation row says 360° while the feature list says 270°. The older Betstco manual’s rotation differs from the current table; confirm delivered stops instead of using a conflicting angle as an operating instruction.
Official product pages and manual links were reviewed on November 8, 2026. References include Wallenstein’s January 2025 BX-S manual and Betstco’s current index-linked FH-BX manual, which has no visible revision date. The older Betstco manual dated January 3, 2018 is identified separately where specifications differ.
FOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.
