Wallenstein BX52S vs Woodland WC68: five-inch gravity feed or six-inch hydraulic control
WC68 adds a 6-inch diameter rating and adjustable hydraulic feeding to the 5-inch gravity-feed BX52S decision. Its 20-PTO-hp minimum does not promise full-speed six-inch processing: Woodland requires over 40 PTO hp for that condition. BX52S instead publishes 22–55 engine hp. Compare the real branch sizes and feed controls before comparing the differently based power numbers.
By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test
Wallenstein BX52S: when to shortlist itConsider when a 5-inch published capacity and gravity feed meet the work, the tractor falls in the stated engine band, and a delivered quote resolves mass, folding dimensions and the chosen shaft.
Woodland Mills WC68: when to shortlist itConsider when 6-inch material or powered feed adjustment is the reason for buying, after confirming 20–50 PTO hp, complete load limits and the over 40-PTO condition if full-diameter/full-feed operation matters.
Official U.S. pages checked November 7, 2026. Wallenstein has no captured numeric manufacturer price and needs a seller quote. Woodland amounts, where present, are dated USD base listings, not a complete delivered cost. No price ranking or stock promise is made. Open your saved comparison →
WC68 offers a larger stated diameter, while BX52S has the longer second opening dimension. Neither rectangular area nor the long side establishes usable round capacity or eliminates branch preparation.
BX52S: 22–55 engine hp; no material-specific full-capacity threshold established. WC68: 20–50 PTO hp; over 40 PTO hp for full 6-inch logs at full infeed speed.
Use the correct tractor rating for each screen. A WC68 match near 20 PTO hp does not support buying on its full-speed six-inch capability, and no equivalent Wallenstein result can be inferred from 22 engine hp.
BX52S: gravity/manual feed. WC68: hydraulic roller with adjustable speed and direction; onboard pump and reservoir.
If regulating or reversing the powered feed is central to the work, WC68 documents that control. Neither choice requires a tractor hydraulic feed-remotes circuit; WC68 still has an onboard system to maintain.
BX52S: 505 lb Total Weight; complete shaft-inclusive basis unverified. WC68: 747 lb Product Weight in Rev C manual; shipping 842 lb there versus 825 lb on current page.
Request complete operating loads and actual load centers before making a tractor-lift choice. Do not subtract these unlike labels to claim a confirmed 242-pound operating-load saving.
BX52S: 540 or 1000 rpm; separate 1000-rpm shaft Z44506 listed. WC68: 540 rpm input; shear-protected shaft included.
Confirm which shaft is in the Wallenstein quote. The 1000-rpm option is a driveline choice, not a promised output increase and not permission to overspeed WC68.
Consider when a 5-inch published capacity and gravity feed meet the work, the tractor falls in the stated engine band, and a delivered quote resolves mass, folding dimensions and the chosen shaft.
Consider when 6-inch material or powered feed adjustment is the reason for buying, after confirming 20–50 PTO hp, complete load limits and the over 40-PTO condition if full-diameter/full-feed operation matters.
BX52S page and manual dimensions differ, and its rotation entries disagree.
WC68 shipping weights differ between current page and retained Rev C manual; neither is an operating weight.
No Wallenstein minimum-power full-diameter promise is documented.
Manufacturer product pages and their linked manuals were checked November 7, 2026. Document conflicts are retained. No field testing or manufacturer-approved tractor pairing is claimed.
FOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.
