THE TRADEOFFS, EXPLAINED

Woodland Mills WC46 vs WoodMaxx WM-8H: a light 4-inch chipper or an 8-inch one at its 19-hp floor

WC46 and WM-8H both feed hydraulically without tractor remotes, but they are built for different tractors. A KIOTI CS2530H, at 19.3 PTO hp with a 700-lb lift, shows the trade: it is inside WC46’s 15–30 PTO hp with 113 lb of lift to spare, and 0.3 over WM-8H’s 19-hp minimum with no published WM-8H operating weight to check against the lift.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Woodland Mills WC46 PTO wood chipper

Woodland Mills

WC46

15–30 PTO hp · 4″ max. chip diameter

$3,220 checked November 7, 2026

Check current price at Woodland Mills
WoodMaxx WM-8H PTO wood chipper

WoodMaxx

WM-8H

19 PTO hp minimum; maximum not stated · 8″ max. chip diameter

$4,095 checked November 7, 2026

Check current price at WoodMaxx

START WITH THE DECISION

Consider WC46 for a sub-compact under 30 PTO hpShortlist WC46 when the tractor has 15–30 PTO hp, branches are mostly under 4 inches and the lift needs room to spare.

Consider WM-8H only with a confirmed weightShortlist WM-8H when the tractor clears 19 PTO hp, WoodMaxx confirms an operating weight the lift can carry, and you expect to move to a larger tractor later.

Read the evidence behind the choice ↓

Observed U.S. seller prices, checked November 7, 2026, from the retained product records. Prices were not refreshed for this comparison. Tax, shipping, options and the final seller quote may change the delivered total; these are dated observations, not a live price or stock feed. Open your saved comparison →

The differences that matter.

01

15–30 against 19 and up

Woodland Mills lists WC46 at 15–30 PTO hp and ties full 4-inch logs at full feed to over 20. WoodMaxx lists WM-8H from 19 PTO hp (a lower Specs bullet says 15 without a basis), with 4-inch hardwood or 6-inch softwood at 19 and full 8-inch capacity at 50.

At 19 PTO hp, WC46 is near its full-feed line and WM-8H is at its minimum, chipping well under its rated size.

02

587 lb against an unpublished weight

WC46’s manual lists 587 lb product weight. WoodMaxx publishes only a 990-lb shipping weight for WM-8H; its mechanical-feed WM-8M is 775 lb on the hitch.

On a 700-lb lift, WC46 has room; WM-8H needs a confirmed operating weight before it can be screened.

03

4 inches against 8

WC46 lists a 4-inch maximum. WM-8H lists 8 inches, with smaller sizes at low power.

WM-8H suits a later, larger tractor; WC46 is sized for the sub-compact.

04

Hydraulic feed on both

WC46 has a self-contained tank and belt-driven pump; WM-8H has a self-contained pump with dual feed motors. WoodMaxx’s manual gives two different fill quantities (6.5 and 7 gallons).

Both let the operator slow the feed on a small tractor; confirm WM-8H’s fill instructions on delivery.

05

$3,220 against $4,095

WC46 was observed at $3,220 and WM-8H at $4,095 on November 7, 2026.

WM-8H cost $875 more on these dated observations.

A CONDITIONAL SHORTLIST

Which direction makes sense?

Consider WC46 for a sub-compact under 30 PTO hp

Shortlist WC46 when the tractor has 15–30 PTO hp, branches are mostly under 4 inches and the lift needs room to spare.

Check current price at Woodland MillsPrepare questions for the seller

Consider WM-8H only with a confirmed weight

Shortlist WM-8H when the tractor clears 19 PTO hp, WoodMaxx confirms an operating weight the lift can carry, and you expect to move to a larger tractor later.

Check current price at WoodMaxxPrepare questions for the seller

Keep these source limits with the decision.

WM-8H’s page leads with a 19-PTO-hp minimum and has a lower 15-hp bullet without a basis; its manual gives 6.5 and 7 gallons of hydraulic fill.

WC46’s current page lists 648 lb shipping weight and the 2024 manual 693 lb; neither replaces the 587-lb product weight.

This comparison reuses the manufacturer evidence retained in the product records reviewed November 7, 2026; product pages were not re-fetched on November 9. WC46 uses the current page and May 2024 Rev C manual; WM-8H uses the current page and its linked manual.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Woodland Mills WC46 official product page15–30 PTO hp
  2. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sectionsPrinted p9 product weight (587 lb); p12 Cat 1 and PTO range
  3. Official WM-8H product page: power, feed, hitch and price19 PTO hp minimum (lower Specs bullet 15 hp); 4-inch hardwood / 6-inch softwood at 19 PTO hp; full 8-inch at 50; hydraulic feed; 990-lb shipping weight; price
  4. WM-8H linked manual — assembly p20 and maintenance p29 give different fill quantitiesAssembly p20 and maintenance p29: hydraulic fill quantities
  5. WoodMaxx current manual index
  6. WoodMaxx WM-8M official product page19 PTO hp minimum; 775 lb on the hitch; price