WoodMaxx FM-62 Y vs FM-54 Y: eight more inches of cut with a higher power floor
FM-62 Y increases published cut from 47 to 55 inches and minimum PTO power from 15 to 20 hp. Both use 18 Y-blade sets and fixed placement, so blade-count headlines do not explain the size step. The larger mower’s dated price was $640 higher, and neither generic weight reference confirms the complete Y assembly.
By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test
WoodMaxx FM-62 · Y-blades: when to shortlist itConsider when 55 inches of cut is useful, at least 20 PTO hp is available within its range, and the actual Y operating load and fixed placement are confirmed.
WoodMaxx FM-54 · Y-blades: when to shortlist itConsider when 47 inches meets the work and the 15–25 PTO Y range fits the documented tractor output, after resolving height and complete-load questions.
Exact official black/blade option observations on November 7, 2026. Base prices exclude uncalculated options, delivery, taxes and setup. Equal price does not establish equal lifetime cost. Open your saved comparison →
The differences that matter.
01
Actual cutting width
FM-62 Y: 55 inches. FM-54 Y: 47 inches.
The difference is 8 inches of published cut, not the difference between model numerals. Check actual tire coverage and route clearance separately.
Below 20 PTO hp the FM-62 Y minimum is not met; above 25 PTO hp the FM-54 Y upper band differs. In the 20–25 overlap, size and complete load remain open decisions.
The references point to different machine classes but lack verified Y-specific complete inclusion. Obtain assembled weights and load centers instead of subtracting these numbers into a claimed lift margin.
FM-62 Y: 3/4–3-3/4 inches. FM-54 Y: 3/4–3-1/2 inches in current manual; page says 2-1/2 upper.
The documented manual ceilings differ by 1/4 inch, but FM-54 page/manual conflict must be resolved if target height is decisive. Do not substitute a precise unverified field height.
Consider when 55 inches of cut is useful, at least 20 PTO hp is available within its range, and the actual Y operating load and fixed placement are confirmed.
Consider when 47 inches meets the work and the 15–25 PTO Y range fits the documented tractor output, after resolving height and complete-load questions.
Both models have conflicting generic manual/page weights and unstated Y assembly inclusions.
FM-54 cutting-height upper limit differs between page and manual.
Exact official product configurations, current options and manufacturer-linked manuals were checked November 7, 2026. Source labels and unresolved revision differences are retained. These comparisons interpret published evidence and do not represent field tests or confirmed tractor pairings.
FOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.
