SIMILAR MACHINES. DIFFERENT DECISIONS.
Find the differences that matter.
175 focused comparisons. Understand the differences in power, weight and setup before you choose.
Find your comparison
13 comparisons matching your search
13 FOCUSED COMPARISONS
PTO wood chippers
vs
Woodland Mills TFG55 vs WoodMaxx WM-8M: 346-lb sub-compact chipper or 775-lb 8-inch
Sub-compact or compact: TFG55 or WM-8M?
Read the comparison →
vsFarmer-Helper FH-BX42 vs WoodMaxx WM-8M: 4-inch gravity or 8-inch mechanical feed
FH-BX42 or WM-8M?
Read the comparison →
vsWallenstein BX52S vs WoodMaxx WM-8M: 5-inch gravity or 8-inch mechanical feed
Compact tractor: BX52S or WM-8M?
Read the comparison →
vsWoodMaxx MX-8800 vs WM-8M: hydrostatic or mechanical feed at 8 inches
WoodMaxx 8-inch: MX-8800 or WM-8M?
Read the comparison →vs
WoodMaxx WM-8M vs MX-9900: fixed mechanical feed or a 9-inch hydrostatic-feed chipper
On a Category 2 tractor with about 48 PTO hp: WM-8M or MX-9900?
Read the comparison →
vsFarmry WCAP5 vs WoodMaxx WM-8M: a 45-engine-hp ceiling or a 19-PTO-hp floor
My tractor has about 45 engine and 36 PTO hp: WCAP5 or WM-8M?
Read the comparison →
vsWoodland Mills WC68 vs WoodMaxx WM-8M: a 6-inch hydraulic feed or an 8-inch mechanical feed
My tractor has about 33 PTO hp, short of WC88’s 35: should I buy the 6-inch WC68 or the 8-inch WM-8M?
Read the comparison →
vsWallenstein BX72S vs WoodMaxx WM-8M: Category 2 chippers for a 50-hp tractor
On a Category 2 tractor with about 52 engine and 42–44 PTO hp, is BX72S or WM-8M the better chipper?
Read the comparison →
vsWoodland Mills WC88 vs WoodMaxx WM-8M: two 8-inch chippers, 35 PTO hp apart at the minimum
With about 34–36 PTO hp, should I buy WC88 or the lower-minimum WM-8M?
Read the comparison →
vsWoodland Mills WC46 vs WoodMaxx WM-8M: a 4-inch hydraulic feed or an 8-inch mechanical feed
On a small tractor, should I buy the 4-inch WC46 with variable hydraulic feed or the 8-inch WM-8M with a fixed mechanical feed?
Read the comparison →
vsFarmry WCAP5 PRO vs WoodMaxx WM-8M: gravity or mechanical feed?
Do I want gravity feed for smaller branches or a powered mechanical roller for a larger material mix?
Read the comparison →
vsFarmer-Helper FH-BX62S vs WoodMaxx WM-8M: gravity draw or a mechanical roller
Do I want gravity draw or a fixed-speed powered feed roller without a hydraulic feed circuit?
Read the comparison →
vsWoodMaxx WM-8H vs WM-8M: adjustable hydraulic feed or fixed mechanical feed?
Is adjustable hydraulic feed worth the extra cost over fixed mechanical feed?
Read the comparison →Want your own combination?
Add up to three products to the saved comparison and select your exact tractor to see the initial specification screen.