THE ACREAGE EQUIPMENT FIELD GUIDE
LS tractors by model: PTO hp, lift and chipper and flail mower fit
This site profiles 32 LS tractor configurations across 20 model families, from 15 to 85.5 PTO hp, with chipper and flail mower fit for each. The table lists each one’s PTO and engine hp, lift at 24 inches, and how many of the site’s 19 chippers and 23 flail mowers its figures do not rule out.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

THE DECISION IN NUMBERS
LS configurations on this site, by PTO hp
Figures from each configuration’s retained profile (reviewed by November 9, 2026). Last column: chippers / flail mowers not excluded by the site’s screen, out of 19 / 23. † recorded source conflict.
Scroll the table sideways on smaller screens.
| Configuration | PTO hp | Engine hp | Lift at 24 in. | Chippers / flails |
|---|---|---|---|---|
| MT122 HST | 15 | 21.5 | 728 lb | 6 / 5 |
| MT226E HST | 17.1 | 24.6 | 1,433 lb | 7 / 6 |
| MT125 HST † | 17.2 | 24.7 | 728 lb | 7 / 5 |
| XJ2025H HST † | 18.5 | 24.4 | 1,058 lb | 7 / 6 |
| MT226E gear | 19.2 | 24.6 | 1,433 lb | 9 / 6 |
| MT225S HST † | 19.3 | 24.7 | 1,323 lb | 9 / 5 |
| MT232E HST | 26.2 | 31.7 | 1,433 lb | 13 / 15 |
| MT335H HST | 28 | 35 | 1,433 lb | 13 / 16 |
| MT232E gear † | 28.5 | 31.7 | 1,433 lb | 13 / 15 |
| MT340HC HST cab | 32 | 40 | 1,433 lb | 11 / 19 |
| MT342 HST † | 33.6 | 42 | 2,469 lb | 11 / 20 |
| MT242E HST † | 34.8 | 42.5 | 1,433 lb | 11 / 20 |
| MT242E gear † | 35.4 | 42.5 | 1,433 lb | 12 / 17 |
| MT342 gear † | 35.7 | 42 | 2,469 lb | 12 / 17 |
| MT345E HST † | 36 | 45 | 2,425 lb | 13 / 17 |
| MT347 HST † | 37.6 | 47 | 2,469 lb | 12 / 17 |
| MT345E gear † | 38.2 | 45 | 2,425 lb | 13 / 17 |
| MT347 gear † | 39.9 | 47 | 2,469 lb | 12 / 17 |
| MT352 HST † | 41.6 | 52 | 2,469 lb | 6 / 6 |
| MT355E HST † | 44 | 55 | 2,425 lb | 13 / 18 |
| MT352 gear † | 44.2 | 52 | 2,469 lb | 6 / 6 |
| MT357 HST † | 45.6 | 57 | 2,469 lb | 6 / 6 |
| MT355E gear † | 46.7 | 55 | 2,425 lb | 10 / 11 |
| MT357 gear † | 48.4 | 57 | 2,469 lb | 6 / 6 |
| MT463 gear | 54.1 | 63 | 3,483 lb | 6 / 6 |
| MT463 power shuttle | 54.1 | 63 | 3,483 lb | 6 / 6 |
| MT573 gear cab | 62 | 73 | 4,718 lb | 6 / 6 |
| MT573 power shuttle cab | 62 | 73 | 4,718 lb | 6 / 6 |
| MT473 gear | 62.9 | 73 | 3,483 lb | 6 / 6 |
| MT473 power shuttle | 62.9 | 73 | 3,483 lb | 6 / 6 |
| MT774 power shuttle cab | 65.6 | 73.7 | 5,181 lb | 6 / 3 |
| MT7101 power shuttle cab | 85.5 | 100.6 | 5,952 lb | 6 / 1 |
Sources for this decision table (12)
- LS MT1 Series brochure (PDF created November 6, 2025) ↗Specifications: Engine HP (gross) 21.5, PTO (HP) 15.0, CAT I, hitch lift capacity (hitch end) 992 lb (at 610 mm: 728), total weight 1,433 lb
- LS New MT2E & MT2 Series Specifications 2026 (PDF created February 27, 2026) ↗MT226E–MT242HE columns: Engine HP (gross), PTO HP, transmission, implement pump, Category I, hitch lift capacity (hitch end) 1,808 lb
- Current LS Tractor USA MT125 page — exact HST specifications and options ↗
- LS XJ series brochure (PDF created November 6, 2025) ↗Specifications: Engine HP (gross) 24.7, PTO (HP) 18.5, CAT I, hitch lift capacity (hitch end) 1,433 lb; feature text “1,276 lbs. of lift”
- Current LS Tractor USA MT225S page — exact HST specifications and optional rear outlets ↗
- LS Tractor USA MT335H model page ↗Specifications: Engine HP (Gross) 35, PTO HP 28.0, Synchro Shuttle/HST 12F/12R, independent 540 PTO, Category CAT I, Hitch Lift capacity (Hitch end) 1,808, total weight 3,285 lb
- LS Tractor USA MT340HC model page ↗Specifications: Engine HP (Gross) 40, PTO HP 32.0, HST 3 ranges, independent 540 PTO, Category CAT I, Hitch Lift capacity (Hitch end) 1,808, total weight 3,661 lb
- LS Tractor MT3 Series brochure (LS-Tractor-Brochure_MT3_Update_v5, PDF dated July 18, 2025): p2 MT342 / MT347 / MT352 / MT357 specifications ↗p2 Specifications table: Engine HP (gross), PTO (HP) by column, Total Flow, Category (3pt Hitch), Hitch Lift Capacity Hitch End, Total Weight
- LS MT3E series brochure (PDF created October 3, 2025) ↗p2 specifications: Engine HP (kW), PTO (HP) MT345E 38.2 / MT345HE 36.0 / MT355E 46.7 / MT355HE 44.0, Category (3pt hitch) CAT I, hitch lift capacity 2,910 lb
- LS MT4 series brochure (PDF created July 18, 2025) ↗p2 MT4 Series Specifications: Engine HP (gross) 63 / 73, PTO (HP) 54.1 / 62.9, 540/540E, Category (3pt hitch) CAT II, hitch lift capacity 3,483 lb @ 24 in. from the hitch end
- LS MT5 series brochure (PDF created July 18, 2025) ↗p2 specifications: Engine HP (kW) 73 (54.4), PTO (HP) 62, rear PTO 540/750/1,000, CAT II, hitch lift capacity (hitch end) 6,614 lb
- LS MT7 series brochure (PDF created September 25, 2025), linked from the current MT774CPS and MT7101CPS pages ↗p2 specifications: Engine HP (kW) 73.7 (55) / 100.6 (75); PTO HP 65.6 / 85.5; independent PTO 540/750/1,000; CAT II; hitch lift capacity 7,275 / 8,378 lb; overall width 78.7 in.; weight 7,827 / 7,985 lb
Where the line-up sits
The 32 LS configurations profiled here run from 15 to 85.5 PTO hp across 20 model families. 8 of them sit within 1 PTO hp of a 30, 35, 45, 50 or 65-hp attachment limit, where the transmission or the document version can change the answer.
Gear and HST
9 LS models here are profiled in both gear and HST versions. The widest gap is the MT357’s 2.8 PTO hp (48.4 gear, 45.6 HST). In 4 of them the gap crosses a published attachment limit; the MT355E’s gap spans the 45-hp line.
Lift
Published lift 24 inches behind the hitch runs from 728 to 5,952 lb. 12 configurations list less than the 1,950 lb of Wallenstein BX102RI, the heaviest attachment on this site.
Hitch category
12 configurations list a Category 2 hitch only, which this site screens out for Category 1-only attachments; 4 list Category 1 and 2 or a hitch convertible between them.
What fits most often
Across these configurations, WoodMaxx WM-8H (28 of 32) and WoodMaxx WM-8M (28) are the chippers that most often clear the published limits; Farmry HFS87 (25) and WoodMaxx FM-78H (21) lead the flail mowers. ‘Clears’ means not excluded; nearly every pairing still needs dealer confirmation.
LS notes
LS’s MT3E pages list a Category 2 hitch where the manual lists Category 1, and the MT463, MT473 and MT573 are Category 2 only. The MT122 sits exactly on the 15-PTO-hp minimum that the smallest attachments list. LS’s MT3 brochures give lift only at the link ends; the 24-inch figures come from its September 2025 owner manuals. 18 configurations marked † carry a recorded source conflict.
Take these questions with you.
- Which exact configuration and transmission is the tractor?
- Which document date do the PTO and lift figures come from?
- Is the attachment rated on engine or PTO horsepower?
- What does the dealer list for lift 24 inches behind the hitch?
Keep these questions with your exact tractor and attachment details.
Use these questions in my seller briefFOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.
- LS MT1 Series brochure (PDF created November 6, 2025)Specifications: Engine HP (gross) 21.5, PTO (HP) 15.0, CAT I, hitch lift capacity (hitch end) 992 lb (at 610 mm: 728), total weight 1,433 lb
- LS New MT2E & MT2 Series Specifications 2026 (PDF created February 27, 2026)MT226E–MT242HE columns: Engine HP (gross), PTO HP, transmission, implement pump, Category I, hitch lift capacity (hitch end) 1,808 lb
- Current LS Tractor USA MT125 page — exact HST specifications and options
- LS XJ series brochure (PDF created November 6, 2025)Specifications: Engine HP (gross) 24.7, PTO (HP) 18.5, CAT I, hitch lift capacity (hitch end) 1,433 lb; feature text “1,276 lbs. of lift”
- Current LS Tractor USA MT225S page — exact HST specifications and optional rear outlets
- LS Tractor USA MT335H model pageSpecifications: Engine HP (Gross) 35, PTO HP 28.0, Synchro Shuttle/HST 12F/12R, independent 540 PTO, Category CAT I, Hitch Lift capacity (Hitch end) 1,808, total weight 3,285 lb
- LS Tractor USA MT340HC model pageSpecifications: Engine HP (Gross) 40, PTO HP 32.0, HST 3 ranges, independent 540 PTO, Category CAT I, Hitch Lift capacity (Hitch end) 1,808, total weight 3,661 lb
- LS Tractor MT3 Series brochure (LS-Tractor-Brochure_MT3_Update_v5, PDF dated July 18, 2025): p2 MT342 / MT347 / MT352 / MT357 specificationsp2 Specifications table: Engine HP (gross), PTO (HP) by column, Total Flow, Category (3pt Hitch), Hitch Lift Capacity Hitch End, Total Weight
- LS MT3E series brochure (PDF created October 3, 2025)p2 specifications: Engine HP (kW), PTO (HP) MT345E 38.2 / MT345HE 36.0 / MT355E 46.7 / MT355HE 44.0, Category (3pt hitch) CAT I, hitch lift capacity 2,910 lb
- LS MT4 series brochure (PDF created July 18, 2025)p2 MT4 Series Specifications: Engine HP (gross) 63 / 73, PTO (HP) 54.1 / 62.9, 540/540E, Category (3pt hitch) CAT II, hitch lift capacity 3,483 lb @ 24 in. from the hitch end
- LS MT5 series brochure (PDF created July 18, 2025)p2 specifications: Engine HP (kW) 73 (54.4), PTO (HP) 62, rear PTO 540/750/1,000, CAT II, hitch lift capacity (hitch end) 6,614 lb
- LS MT7 series brochure (PDF created September 25, 2025), linked from the current MT774CPS and MT7101CPS pagesp2 specifications: Engine HP (kW) 73.7 (55) / 100.6 (75); PTO HP 65.6 / 85.5; independent PTO 540/750/1,000; CAT II; hitch lift capacity 7,275 / 8,378 lb; overall width 78.7 in.; weight 7,827 / 7,985 lb
- Official WM-8H product page: power, feed, hitch and price
- Official WM-8M page: configuration, 775 lb hitch weight and price
- Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
- Official FM-78H page: hammer option, price, equipment and conflicting weights
- WM-8H linked manual — assembly p20 and maintenance p29 give different fill quantities
- WoodMaxx current manual index
- WM-8M manual linked by current WoodMaxx manual index
- WoodMaxx FAQ, question 1: mechanical versus hydraulic feed
- Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41 specifications
- Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications



