THE ACREAGE EQUIPMENT FIELD GUIDE
Around 19–20 PTO hp: where WoodMaxx and Woodland Mills minimums start
Several popular attachments start at 19 or 20 PTO hp: WoodMaxx’s WM-8M and WM-8H at 19, Woodland Mills WC68, WoodMaxx MX-8800 and FM-62 Y at 20. A large group of sub-compact and small compact tractors sits within a horsepower of those lines, and the transmission often decides.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

THE DECISION IN NUMBERS
Tractors within about a horsepower of 19–20 PTO hp
Tractor figures from the site’s current profiles (reviewed November 7–9, 2026). Lines: WM-8M / WM-8H 19 PTO hp; WC68, MX-8800, FM-62 Y 20 PTO hp.
Scroll the table sideways on smaller screens.
| Tractor | PTO hp | Against 19 | Against 20 |
|---|---|---|---|
| John Deere 1025R / 2025R | 18 / 18.2 | Short | Short |
| Kubota L2502 HST / KIOTI CS2510–CS2520 / CK2620 HST | 18.4 / 18.5 / 18.7 | Short by 0.3–0.6 | Short |
| Kubota BX2680 | 19.2 | +0.2 | 0.8 short |
| KIOTI CS2530H / LS MT225S | 19.3 | +0.3 | 0.7 short |
| Kubota LX2620 / B2601 / John Deere 3025E | 19.4 | +0.4 | 0.6 short |
| KIOTI CK2620 gear / MF GC1725M / Kubota L2502 gear | 19.5 / 19.6 / 19.8 | Over | 0.2–0.5 short |
| Kubota L2501 gear / MF 1825E / Mahindra 1626 Shuttle | 20.5 / 20.4 / 21.5 | Over | Over |
Sources for this decision table (10)
- John Deere 1025R current U.S. product specifications ↗
- Kubota 2026 Full Line Catalog — printed pp2 and 6 ↗
- KIOTI CS10/CS20/CS30 brochure (PDF created August 27, 2026) ↗PDF p12 CS30 specifications: Engine Gross, PTO, Category I, Maximum Lifting Capacity 700 lb @ 24 in. aft of hitch, weight
- Current LS Tractor USA MT225S page — exact HST specifications and optional rear outlets ↗
- Kubota 2026 Full Line Catalog ↗
- KIOTI CK20 / CK20SE brochure, printed page 6 ↗
- Kubota L2501 U.S. brochure, December 2014 ↗
- Mahindra USA 1600 Series brochure, Rev 09022025: PDF p5 tractor specifications (engine, PTO type and PTO hp by transmission, 3-point lift at 24 in., hydraulics, weight) ↗PDF p5, Tractor Specifications: PTO and Hydraulic System rows
- WoodMaxx WM-8M official product page ↗19 PTO hp minimum; 775 lb on the hitch; price
- Woodland Mills WC68 official product page ↗Capacity, including full-diameter/full-infeed-speed condition; price
The lines
WoodMaxx lists WM-8M and WM-8H from 19 PTO hp and MX-8800 and FM-62 Y from 20. Woodland Mills lists WC68 at 20–50 PTO hp. Farmer-Helper FH-EFGC125 starts at 22. Below these, Woodland Mills WC46 and TFG55, Farmry WCAP5 and LFS, Betstco FH-BX42 and WoodMaxx FM-54 Y start at 12–15.
Just over 19
On the site’s profiles: KIOTI CS2530H and LS MT225S 19.3; Kubota BX2680 19.2; Kubota LX2620, B2601 and John Deere 3025E 19.4; KIOTI CK2620 gear 19.5; Massey Ferguson GC1725M 19.6; Kubota L2502 gear 19.8. All clear 19 and miss 20.
Just under 19, and over 20
Under 19: KIOTI CS2510/CS2520 18.5, CK2620 HST 18.7, Kubota L2502 HST 18.4, John Deere 2025R 18.2 and 1025R 18. Over 20: Kubota L2501 gear 20.5, Massey Ferguson 1825E 20.4 and Mahindra 1626 Shuttle 21.5, whose HSTs (L2501 19.0, 1626 19.0) sit on the other side.
Then check weight
Clearing 19 PTO hp does not settle a sub-compact pairing. WM-8M weighs 775 lb and WC68 747 lb, more than the lift on the smallest tractors. See the guide on sub-compact lift ratings.
Take these questions with you.
- What is my tractor’s PTO figure for its exact transmission?
- Does the attachment’s minimum use PTO or engine horsepower?
- Can my tractor’s lift carry the attachment’s operating weight?
- What does the maker expect at its minimum: what size material and feed rate?
Keep these questions with your exact tractor and attachment details.
Use these questions in my seller briefFOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.
- WoodMaxx WM-8M official product page19 PTO hp minimum; 775 lb on the hitch; price
- Official WM-8H product page: power, feed, hitch and price19 PTO hp minimum (lower Specs bullet 15 hp); 4-inch hardwood / 6-inch softwood at 19 PTO hp; full 8-inch at 50; hydraulic feed; 990-lb shipping weight; price
- Woodland Mills WC68 official product pageCapacity, including full-diameter/full-infeed-speed condition; price
- Official MX-8800 page: power/capacity claims, feed, hitch and current sale price
- WoodMaxx 2025-to-current FM series operator manualPrinted p40 / PDF p41: blade-specific PTO requirements, cutting width, fixed extents, hitch category and Category 2 bushings, product weight
- John Deere 1025R current U.S. product specifications
- Kubota 2026 Full Line Catalog — printed pp2 and 6
- KIOTI CS10/CS20/CS30 brochure (PDF created August 27, 2026)PDF p12 CS30 specifications: Engine Gross, PTO, Category I, Maximum Lifting Capacity 700 lb @ 24 in. aft of hitch, weight
- Current LS Tractor USA MT225S page — exact HST specifications and optional rear outlets
- KIOTI CK20 / CK20SE brochure, printed page 6
- Kubota L2501 U.S. brochure, December 2014
- Mahindra USA 1600 Series brochure, Rev 09022025: PDF p5 tractor specifications (engine, PTO type and PTO hp by transmission, 3-point lift at 24 in., hydraulics, weight)PDF p5, Tractor Specifications: PTO and Hydraulic System rows
- Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
- WM-8H linked manual — assembly p20 and maintenance p29 give different fill quantities
- WoodMaxx current manual index
- WM-8M manual linked by current WoodMaxx manual index
- WoodMaxx FAQ, question 1: mechanical versus hydraulic feed
- MX-8800 manual Rev D, September 18, 2026: specifications and setup
- Official fixed FM-62 page: exact black/Y option, USD price, blade guidance and conflicts




