THE ACREAGE EQUIPMENT FIELD GUIDE
Tractors near 35 PTO hp: Woodland Mills WC88 and Farmry LFS
Woodland Mills WC88 starts at 35 PTO hp and Farmry’s LFS45, LFS53 and LFS61 flail mowers stop at 35 hp, so a tractor near 35 can fit one and not the other. 32 tractor configurations on this site sit between 33 and 37 PTO hp, where a transmission or a spec sheet can move the answer.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

THE DECISION IN NUMBERS
Configurations from 33 to 37 PTO hp
Results from the site’s screen. Review means not excluded but needing confirmation; † recorded source conflict.
Scroll the table sideways on smaller screens.
| Tractor | PTO / engine hp | WC88 (from 35 PTO) | Farmry LFS61 (to 35 hp) |
|---|---|---|---|
| KIOTI CK4020 HST † | 33.3 / 39.6 | Excluded | Review |
| KIOTI DK4720SEH HST † | 33.4 / 44.9 | Excluded | Review |
| Massey Ferguson MF 1E.40 gear † | 33.5 / 39.4 | Excluded | Review |
| John Deere 4044M HST † | 33.6 / 43 | Excluded | Review |
| John Deere 4044R HST † | 33.6 / 43.1 | Excluded | Review |
| LS MT342 HST † | 33.6 / 42 | Excluded | Review |
| KIOTI NX4510 HST | 33.9 / 45 | Excluded | Review |
| Case IH Farmall 40C gear cab | 34 / 40 | Excluded | Review |
| New Holland Boomer 40 gear | 34 / 40 | Excluded | Review |
| New Holland WORKMASTER 40 gear † | 34 / 40 | Excluded | Review |
| John Deere 3046R HST † | 34.1 / 45 | Excluded | Review |
| Case IH Farmall 40A HST † | 34.8 / 40 | Excluded | Review |
| KIOTI CK4020 gear † | 34.8 / 39.6 | Excluded | Review |
| LS MT242E HST † | 34.8 / 42.5 | Excluded | Review |
| New Holland WORKMASTER 40C HST | 34.8 / 40 | Excluded | Review |
| LS MT242E gear † | 35.4 / 42.5 | Review | Excluded |
| Yanmar YM347 gear | 35.5 / 46 | Review | Excluded |
| LS MT342 gear † | 35.7 / 42 | Review | Excluded |
| Case IH Farmall 40A gear † | 35.9 / 40 | Review | Excluded |
| New Holland WORKMASTER 40C gear | 35.9 / 40 | Review | Excluded |
| TYM T474 gear † | 35.9 / 48.3 | Review | Excluded |
| Case IH Farmall 45C HST | 36 / 45 | Review | Excluded |
| LS MT345E HST † | 36 / 45 | Review | Excluded |
| New Holland Boomer 45 HST | 36 / 45 | Review | Excluded |
| TYM 4215 gear | 36 / 41 | Review | Excluded |
| TYM 4215 HST | 36 / 41 | Review | Excluded |
| Kubota L4470 Premium HST | 36.2 / 44 | Review | Excluded |
| Massey Ferguson MF 2M.50 HST † | 36.2 / 48.8 | Review | Excluded |
| John Deere 3043D gear | 36.3 / 42.2 | Review | Excluded |
| KIOTI NS4710 HST † | 36.3 / 44.9 | Review | Excluded |
| KIOTI NS4710 gear † | 36.6 / 44.9 | Review | Excluded |
| John Deere 5050E open station | 37 / 50 | Review | Excluded |
Sources for this decision table (26)
- Official U.S. WC88 page: price, capacity and drive system ↗35–100+ PTO hp; 8-inch capacity; full feed over 60 PTO hp
- Farmry official product specifications ↗Tractor Power Range 15–35 HP (basis not stated)
- Farmry LFS Series operator manual, Rev 1.7 — Printed pp17–18 specifications; p28 tractor stability ↗Rev 1.7 printed pp17–18: widths, weights; tractor horsepower range without engine/PTO basis
- KIOTI CK20 / CK20SE brochure, printed page 6 ↗
- KIOTI DK20 / DK20SE brochure (PDF created September 17, 2025) ↗Printed/PDF pp6–7 specifications: Engine Gross, PTO hp, pump capacity, 3-point hitch, Maximum Lifting Capacity* (@ 24 in. aft of hitch), remote valves, width
- Massey Ferguson MF 1E Series spec sheet MF24SST002FCv02 (PDF modified June 18, 2025) ↗p2 Technical Specifications: rated engine power @ 2600 rpm, PTO power @ 540 rpm (Mech / HST), transmission rows, flows, Cat 1, lift at lift points and 24 in. behind, PTO type, width, base weight
- John Deere 4044M current U.S. product page ↗
- John Deere U.S. order book, 5 May 2026 — 4044R base machine (032ALV) ↗Order code 032ALV: engine 43.1 hp gross SAE J1995, PTO 32.5 hp, HST 3-range
- LS Tractor MT3 Series brochure (LS-Tractor-Brochure_MT3_Update_v5, PDF dated July 18, 2025): p2 MT342 / MT347 / MT352 / MT357 specifications ↗p2 Specifications table: Engine HP (gross), PTO (HP) by column, Total Flow, Category (3pt Hitch), Hitch Lift Capacity Hitch End, Total Weight
- KIOTI NX Series brochure (PDF created September 18, 2025) ↗p12 Specifications: Engine Gross hp, PTO hp by model and transmission, pump capacity, 3-point hitch category, maximum lift capacity (footnote: @ 24 in. aft of hitch), width, weight
- Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023) ↗Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
- New Holland WORKMASTER and Boomer compact tractor brochure (PDF created March 25, 2025) ↗PDF p3 model table (gross hp, PTO hp gear/HST, lift); PDF p27 Boomer Series specifications (Boomer 35 and 40/40 CAB columns: PTO hp, 1,808 lb at ball ends, 1,345 lb at 24 in., Category I, width, weight)
- New Holland WORKMASTER 25/35/40 specification workbook (series-page download) ↗Gross horsepower, PTO horsepower gear/HST, flows, lift at ball ends and 24 in., 3-point category, width, weight (WORKMASTER 40 column)
- John Deere 3046R current U.S. product page ↗
- Case IH Farmall Compact A specification sheet, models 35A–55A (PDF created August 24, 2026) ↗Specifications: Engine HP, PTO HP (Mechanical Trans. / Hydrostatic Trans.), 3pt Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, implement and total flow, weight
- LS New MT2E & MT2 Series Specifications 2026 (PDF created February 27, 2026) ↗MT226E–MT242HE columns: Engine HP (gross), PTO HP, transmission, implement pump, Category I, hitch lift capacity (hitch end) 1,808 lb
- New Holland WORKMASTER 35C & 40C Compact Series brochure (PDF created February 26, 2026), linked from the current U.S. page ↗p13 Specifications: gross engine hp; PTO hp gear / HST; 3-Point Hitch Category 1; lift at ball ends and 24 in. behind ball ends; rear PTO type; hydraulic flow; width and weight. p2 overview table
- Yanmar YM3 brochure (PDF created June 29, 2021) ↗Printed p16 specifications: engine (hp), PTO (hp), hitch category (SAE) Category 1 & 2, 3-point lift capacity 24 in. behind, ROPS weight, transmission
- TYM Catalog 2026 – Series 3 (PDF modified January 13, 2026) ↗p20 T474 key specifications; p28 Specification Guide, T474 column: engine and PTO power, transmission, hydraulics, Category, hitch lift and lift at 24 in. behind link ends, weight
- LS MT3E series brochure (PDF created October 3, 2025) ↗p2 specifications: Engine HP (kW), PTO (HP) MT345E 38.2 / MT345HE 36.0 / MT355E 46.7 / MT355HE 44.0, Category (3pt hitch) CAT I, hitch lift capacity 2,910 lb
- TYM 4215R North America product brochure (PDF created August 2025) ↗PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
- Kubota 2026 Full Line Catalog — Grand L70, printed pp14 and 21 (PDF pp16 and 23) ↗
- Massey Ferguson MF 2M Series spec sheet (PDF created November 3, 2025) ↗p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight
- John Deere 3 Series compact utility tractor brochure 3928957 (PDF created July 24, 2025) ↗Specifications: 3025D/3035D/3043D horsepower (SAE J1995), PTO HP geared transmission, lift capacity 24 in. behind center link 1,670 lb, Category 1, gear 8F-8R, transmission-driven PTO with overrunning clutch, weight
- KIOTI NS Series brochure (PDF created September 12, 2025) ↗PDF p12 Specifications: Engine Gross and PTO hp by model, pump capacity, 3-point hitch category, Maximum Lifting Capacity* (footnote: @ 24 in. aft of hitch), width, weight
- John Deere price pages, Tractors 5050E/5060E/5067E/5075E (5 November 2025): 5050E Open Operator Station Utility Tractor (05C0LV) ↗05C0LV base equipment: 50 97/68/EC engine horsepower; 37.0 PTO horsepower @ 2,100 rpm; 3-Point (Category II) Hitch with Sway Bars - Convertible to Category I
Two limits at 35
Woodland Mills rates the 8-inch WC88 from 35 PTO hp. Farmry rates its LFS45, LFS53 and LFS61 mowers at 15–35 hp without saying engine or PTO. A tractor over 35 PTO hp can run WC88 and not an LFS; one under 35 the reverse.
Engine figures change the Farmry answer
Every tractor in the table has more than 35 engine hp. Because Farmry names no basis, this site excludes an LFS only when the PTO rating is also over 35; for the rest it holds the pairing for review and asks Farmry which figure applies.
Gear or HST can decide
Several models straddle 35 by transmission: Case IH’s Farmall 40A is rated 35.9 PTO hp (gear) and 34.8 (HST) on its 2026 sheet, and LS’s MT242E 35.4 and 34.8. On the gear version WC88 is in range; on the HST it is not.
Land Pride FM2560 at 33
Land Pride’s FM2560 starts at 33 hp, also without a basis. Every configuration in the table clears it on both engine and PTO power.
Take these questions with you.
- Which transmission is the tractor, and what PTO hp does its current sheet list?
- Does Farmry’s 35 hp mean engine or PTO?
- Will Woodland Mills confirm WC88 near 35 PTO hp?
- Does the tractor lift WC88’s 900 lb at 24 inches?
Keep these questions with your exact tractor and attachment details.
Use these questions in my seller briefFOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.
- Official U.S. WC88 page: price, capacity and drive system35–100+ PTO hp; 8-inch capacity; full feed over 60 PTO hp
- Farmry official product specificationsTractor Power Range 15–35 HP (basis not stated)
- Farmry LFS Series operator manual, Rev 1.7 — Printed pp17–18 specifications; p28 tractor stabilityRev 1.7 printed pp17–18: widths, weights; tractor horsepower range without engine/PTO basis
- KIOTI CK20 / CK20SE brochure, printed page 6
- KIOTI DK20 / DK20SE brochure (PDF created September 17, 2025)Printed/PDF pp6–7 specifications: Engine Gross, PTO hp, pump capacity, 3-point hitch, Maximum Lifting Capacity* (@ 24 in. aft of hitch), remote valves, width
- Massey Ferguson MF 1E Series spec sheet MF24SST002FCv02 (PDF modified June 18, 2025)p2 Technical Specifications: rated engine power @ 2600 rpm, PTO power @ 540 rpm (Mech / HST), transmission rows, flows, Cat 1, lift at lift points and 24 in. behind, PTO type, width, base weight
- John Deere 4044M current U.S. product page
- John Deere U.S. order book, 5 May 2026 — 4044R base machine (032ALV)Order code 032ALV: engine 43.1 hp gross SAE J1995, PTO 32.5 hp, HST 3-range
- LS Tractor MT3 Series brochure (LS-Tractor-Brochure_MT3_Update_v5, PDF dated July 18, 2025): p2 MT342 / MT347 / MT352 / MT357 specificationsp2 Specifications table: Engine HP (gross), PTO (HP) by column, Total Flow, Category (3pt Hitch), Hitch Lift Capacity Hitch End, Total Weight
- KIOTI NX Series brochure (PDF created September 18, 2025)p12 Specifications: Engine Gross hp, PTO hp by model and transmission, pump capacity, 3-point hitch category, maximum lift capacity (footnote: @ 24 in. aft of hitch), width, weight
- Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023)Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
- New Holland WORKMASTER and Boomer compact tractor brochure (PDF created March 25, 2025)PDF p3 model table (gross hp, PTO hp gear/HST, lift); PDF p27 Boomer Series specifications (Boomer 35 and 40/40 CAB columns: PTO hp, 1,808 lb at ball ends, 1,345 lb at 24 in., Category I, width, weight)
- New Holland WORKMASTER 25/35/40 specification workbook (series-page download)Gross horsepower, PTO horsepower gear/HST, flows, lift at ball ends and 24 in., 3-point category, width, weight (WORKMASTER 40 column)
- John Deere 3046R current U.S. product page
- Case IH Farmall Compact A specification sheet, models 35A–55A (PDF created August 24, 2026)Specifications: Engine HP, PTO HP (Mechanical Trans. / Hydrostatic Trans.), 3pt Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, implement and total flow, weight
- LS New MT2E & MT2 Series Specifications 2026 (PDF created February 27, 2026)MT226E–MT242HE columns: Engine HP (gross), PTO HP, transmission, implement pump, Category I, hitch lift capacity (hitch end) 1,808 lb
- New Holland WORKMASTER 35C & 40C Compact Series brochure (PDF created February 26, 2026), linked from the current U.S. pagep13 Specifications: gross engine hp; PTO hp gear / HST; 3-Point Hitch Category 1; lift at ball ends and 24 in. behind ball ends; rear PTO type; hydraulic flow; width and weight. p2 overview table
- Yanmar YM3 brochure (PDF created June 29, 2021)Printed p16 specifications: engine (hp), PTO (hp), hitch category (SAE) Category 1 & 2, 3-point lift capacity 24 in. behind, ROPS weight, transmission
- TYM Catalog 2026 – Series 3 (PDF modified January 13, 2026)p20 T474 key specifications; p28 Specification Guide, T474 column: engine and PTO power, transmission, hydraulics, Category, hitch lift and lift at 24 in. behind link ends, weight
- LS MT3E series brochure (PDF created October 3, 2025)p2 specifications: Engine HP (kW), PTO (HP) MT345E 38.2 / MT345HE 36.0 / MT355E 46.7 / MT355HE 44.0, Category (3pt hitch) CAT I, hitch lift capacity 2,910 lb
- TYM 4215R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
- Kubota 2026 Full Line Catalog — Grand L70, printed pp14 and 21 (PDF pp16 and 23)
- Massey Ferguson MF 2M Series spec sheet (PDF created November 3, 2025)p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight
- John Deere 3 Series compact utility tractor brochure 3928957 (PDF created July 24, 2025)Specifications: 3025D/3035D/3043D horsepower (SAE J1995), PTO HP geared transmission, lift capacity 24 in. behind center link 1,670 lb, Category 1, gear 8F-8R, transmission-driven PTO with overrunning clutch, weight
- KIOTI NS Series brochure (PDF created September 12, 2025)PDF p12 Specifications: Engine Gross and PTO hp by model, pump capacity, 3-point hitch category, Maximum Lifting Capacity* (footnote: @ 24 in. aft of hitch), width, weight
- John Deere price pages, Tractors 5050E/5060E/5067E/5075E (5 November 2025): 5050E Open Operator Station Utility Tractor (05C0LV)05C0LV base equipment: 50 97/68/EC engine horsepower; 37.0 PTO horsepower @ 2,100 rpm; 3-Point (Category II) Hitch with Sway Bars - Convertible to Category I
- Farmry official product specifications
- Farmry flail mower comparison table — Net-weight comparison; may exclude PTO shaft
- Current linked WC88 operator manual, Rev C, 22-Aug-2022
- Land Pride FM25 current North American family and model listing
- Official FM25 public catalog response — active models, gallery and linked documents
- FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
- Official FM25 brochure — printed p12 model table



