Farmry LFP47 flail mower

Manufacturer product image · Farmry

Farmry · flail mower

LFP47

A fixed Category 1 flail mower with 32 Y-blades and a 47.2-inch manual-listed cutting width. The PTO input is 540 rpm; no hydraulic side-shift ram is listed.

47.2"Cutting width, inches25–45HP · verify basis

$2,199

U.S. price checked November 7, 2026. Confirm shipping, tax, options, and current stock with the seller.

Check current price at Farmry

Opens the seller’s site. Direct link; no affiliate tracking is active. Disclosure

THE SHORT ANSWER

Is LFP47 worth a closer look?

This adds a Y-blade option close in width to LFS45, but it carries about 109 lb more published weight with the shaft and a higher stated tractor-power range. Treat the blade arrangement as a task choice, not evidence of a better cut.

The seller confirms the exact setup, current price and delivery. No field test or manufacturer-confirmed pairing is claimed.

THE BUYING PERSPECTIVE

Know before you order.

  • 25–45 HP is labeled tractor power; neither the product table nor the manual identifies engine or PTO horsepower. Ask Farmry before using this range to select a tractor.
  • The 30 HP gearbox rating is a component rating, not the tractor minimum.
  • The product is marketed as 47 inches; the current manual gives 120 cm / 47.2 inches of cutting width.
  • 32 Y-blades are specified. The page describes hammer blades as a future option, so do not list them as supplied or currently available.
  • Current Rev 1.3 manual recommends SAE 85W-90 API GL-5; the page says SAE90 EP. Resolve the oil specification for the delivered revision with Farmry.
  • The 2,295 rpm figure is rotor speed; tractor input remains 540 rpm.

Published specifications

Power requirement
25–45 hp · basis unclear
Rear PTO
540 rpm
Three-point hitch
Category 1
Cutting width, inches
47.2 inches
Unit weight
464 lb — 464 lb including PTO shaft on the product page; current Rev 1.3 manual lists 210 kg / 463.7 lb. Shipping weight is a separate 671 lb.
Hydraulics
Fixed mower; product table says no hydraulic ram. No external remote is listed for mower adjustment; the tractor three-point lift is still required.
Accessories & setup
Page quotes weight with a PTO shaft; confirm delivered driveline and any quick-hitch adapters. Manual lists Category 1 / ASABE Category 1 quick hitch. Follow the current manual for gear oil, greasing and shaft sizing.

Specifications are manufacturer-published, not measured by Acreage Equipment. A shipping weight is not treated as operating weight.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Official LFP47 product page: configuration, weight and price
  2. LFP Series operator manual, Rev 1.3, printed pp17–20

TRACTORS WE HAVE CHECKED

Which tractors can run the LFP47?

101 of 216 researched tractor families pass the published screen on at least one configuration. Open your tractor for the exact result and the details to confirm.

All tractor guides

MAKE THE TRADEOFFS CLEAR

Read a focused comparison.

See all Farmry LFP47 comparisons →

UNDERSTAND THE SETUP

Make the next check easier.

KEEP EXPLORING

Alternatives covered in our comparisons.

WoodMaxx FM-78H · Hammer blades flail mowerFlail mower

WoodMaxx

FM-78H · Hammer blades

A 70-inch cutting-width flail with hydraulic side shift and 22 individual hammer blades. The current manual specifies 30–65 PTO hp for this configuration; tractor rear remotes are required.

70″Cutting width, inches30–65PTO hp968lb unit weight
Power specification notes

30–65 PTO hp · Hammer blades only

$4,620Details
Checked November 7, 2026
Farmry LFS61 flail mowerFlail mower

Farmry

LFS61

More cutting width for open-ground mowing.

61″cutting width15–35hp · verify basis421lb unit weight
$1,899Details
Checked November 6, 2026
WoodMaxx FM-78 · Y-blades flail mowerFlail mower

WoodMaxx

FM-78 · Y-blades

A fixed-offset 70-inch cutting-width flail with 22 Y-blade sets and a current-manual 30–65 PTO hp range. This is the separately offered black/Y configuration; it has no hydraulic side shift.

70″Cutting width, inches30–65PTO hpUnconfirmedunit weight
Power specification notes

30–65 PTO hp · Y-blades only

$3,900Details
Checked November 7, 2026