TFMS50

THE BUYING PERSPECTIVE

Know before you order.

• The page and manual table say 30–60 HP without engine/PTO basis. Manual p6 separately says tractor power must not exceed 50 PTO hp; have TMG resolve both requirements for the exact tractor.
• Image alternative text still mentions 20–50 HP, conflicting with the current heading/table. Do not use image text as the power specification.
• The 50-inch model name is nominal: page working width is 49 inches, manual cutting width is 1,250 mm (about 49.2 inches).
• Manual lists 20 flail hammers; the page lists a 1.5-inch material capacity. Neither is a physical-test claim.
• Hydraulic side shift does not establish an articulating ditch-bank capability or approve operation on a slope.
• Actual hitch geometry, lift capacity at the load center, ballast and driveline clearance still require confirmation.
• A later official-page observation on November 7, 2026 showed $2,799 versus the earlier $2,499 observation. This is a dated listing reference; confirm the configured price and delivery in a current quote.

Published specifications

Power requirement

30–60 hp · basis unclear

Rear PTO

540 rpm

Three-point hitch

Category 1

Working cut, inches

49 inches

Unit weight

660 lb — Product-page operation weight: 660 lb. Manual structure weight: 300 kg (about 661 lb); shaft and fluid inclusion are not explicit. Shipping weight: 770 lb.

Hydraulics

Hydraulic side-shift cylinder with two hoses is documented. Required tractor flow, pressure, remote configuration and coupler compatibility are not published in the reviewed sources; confirm all with TMG.

Accessories & setup

PTO driveline and two storage kickstands are listed as included. Manual documents cylinder/hoses and says the gearbox ships without gear oil. Confirm tractor couplers and fill the gearbox before operation.

Specifications are manufacturer-published, not measured by Acreage Equipment. A shipping weight is not treated as operating weight.