THE BUYING PERSPECTIVE
Know before you order.
- The current page labels 80–120 as engine HP; the Jan-2025 manual gives 80–120 hp (60–89 kW) without a basis. This site screens it as engine horsepower, as it does BX72S.
- The manual says the BX102S is Category II, 3-point hitch only; it is iMatch and quick-hitch compatible.
- Rated speed is 540–1000 rpm; run the speed the delivered driveline is built for.
- Check three-point geometry, actual lift capacity at the implement load center, front ballast and axle limits.
- Check PTO shaft length, overlap, shielding and clearance across permitted hitch travel; quick hitches change geometry.
Published specifications
- Power requirement
- 80–120 engine hp · official U.S. page
- Rear PTO
- 540–1000 rpm · confirm the correct driveline configuration
- Three-point hitch
- Category 2
- max. chip diameter
- 10 inches
- Unit weight
- 1143 lb — Total Weight 1143 lb (519 kg) on the current page and in the Jan-2025 BX-S manual. Neither says whether the PTO shaft is included; confirm the assembled operating load.
- Hydraulics
- Gravity/manual feed with direct PTO drive. No hydraulic feed or tractor remote is required; three-point lifting remains a separate tractor check.
- Accessories & setup
- The page lists a 1000-rpm PTO shaft Z44803, 30-inch discharge extension CHE100, ledger knife 1019M904, clearance gauge 1012L269 and reversible rotor knife 1019M903. The manual describes a shear-bolt PTO drive; confirm which shaft ships with the order.
Specifications are manufacturer-published, not measured by Acreage Equipment. A shipping weight is not treated as operating weight.
FOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 14, 2026. Confirm the current manual and the exact revision supplied with your machine.
