WC88

THE BUYING PERSPECTIVE

Know before you order.

• The manufacturer states 35–100+ PTO hp. It does not give a finite upper limit. Confirm use above the stated reference range with Woodland Mills.
• Full 8-inch logs at full feed speed require over 60 PTO hp, per the manufacturer; this differs from the 35 PTO hp operating minimum.
• Use 540 rpm at the tractor PTO. The over-1,100 rpm figure describes the flywheel, not the tractor input.
• Check the exact tractor implement-weight limits, lift geometry, front ballast and driveline length. No tractor pairing has been approved.
• The page and manual describe different hopper-mouth heights; the 8 x 8-inch cutting throat is consistent. Confirm external geometry if clearance is critical.

Published specifications

Power requirement

35–100+ PTO hp

Rear PTO

540 rpm

Three-point hitch

Category 1

Maximum branch diameter, inches

8 inches

Unit weight

900 lb — Product weight: 900 lb in current linked 2022 Rev C manual, printed p9; shipping weight is 1,054 lb. The manual does not explicitly identify whether quoted product weight includes the PTO shaft or filled hydraulic oil.

Hydraulics

Self-contained hydraulic infeed; no tractor hydraulic circuit required. Manual tank capacity is 5 gal (19 L); supplied dry. Use the oil specified for the operating climate.

Accessories & setup

PTO shaft with shear-bolt protection is included. Four reversible knives, folding hopper and adjustable chainsaw holder are listed. Hydraulic oil is required before use; confirm exact package contents and shaft length.

Specifications are manufacturer-published, not measured by Acreage Equipment. A shipping weight is not treated as operating weight.