THE TRADEOFFS, EXPLAINED

Farmry LFP47 vs TMG TFM60: 47-inch or 60-inch at about $2,200

They cost $100 apart. LFP47 starts lower; TFM60 cuts 13 inches wider and reaches higher. A Kubota L3302 gear fits both; a Mahindra 1126 HST (19.2 PTO, 25.3 engine hp) only LFP47; a Massey Ferguson MF 2E.60 gear (48 PTO, 57.3 engine) only TFM60.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Compare these two with my tractor Compare the complete purchase cost →

Farmry

LFP47

25–45 hp · basis unclear · 47.2″ Cutting width, inches

$2,199 checked November 7, 2026

Check current price at Farmry

Specs & tractor check →

TMG Industrial

TMG-TFM60

30–60 hp · basis unclear · 60″ cutting width

$2,299 checked November 6, 2026

Check current price at TMG Industrial

Specs & tractor check →

START WITH THE DECISION

Consider LFP47 for sub-compacts and grassShortlist LFP47 for a 25–45 hp tractor with limited lift.

Consider TFM60 for wider cut on a compactShortlist TFM60 for a 30–50 PTO hp compact that a 60-inch cut covers.

Read the evidence behind the choice ↓

Observed U.S. prices, checked November 7, 2026, from the retained product records. Prices were not refreshed for this comparison. Tax, shipping, options and the final seller quote may change the delivered total; these are dated observations, not a live price or stock feed. Open your saved comparison →

The differences that matter.

25–45 hp against 30–60 HP

LFP47: 25–45 hp. TFM60: 30–60 HP, with a 50-PTO-hp maximum in its manual.

Small tractors fit LFP47; tractors at 45–50 PTO hp fit TFM60.

47.2-inch against 60-inch

LFP47 cuts 47.2 inches; TFM60 60 inches (1,550 mm in the manual).

TFM60 covers most compact tractor tracks in one pass.

464 lb against 650 lb

Farmry lists 464 lb with the shaft. TMG lists 650 lb operation weight (about 595 in the manual).

LFP47 suits sub-compact lift ratings.

Y-blades

LFP47 carries 32 Y-blades. TMG describes TFM60 as a heavier fixed flail.

Ask TMG for TFM60’s blade type and count.

A CONDITIONAL SHORTLIST

Which direction makes sense?

Consider LFP47 for sub-compacts and grass

Shortlist LFP47 for a 25–45 hp tractor with limited lift.

Check current price at Farmry Prepare questions for the seller

Consider TFM60 for wider cut on a compact

Shortlist TFM60 for a 30–50 PTO hp compact that a 60-inch cut covers.

Check current price at TMG Industrial Prepare questions for the seller

Keep these source limits with the decision.

LFP47: Farmry labels 25–45 HP as tractor power without saying engine or PTO; the 30 HP gearbox rating is a component rating, not the tractor minimum.

TMG TFM60: the page lists 650 lb and 30–60 HP; the manual lists 270 kg (about 595 lb), a 50-PTO-hp maximum and a 1,550 mm (about 61-inch) cut.

This comparison reuses the manufacturer evidence retained in the product records reviewed November 7, 2026; product pages were not re-fetched on November 9. Document conflicts are kept visible. No field test or manufacturer-approved tractor pairing is claimed.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

Official LFP47 product page: configuration, weight and priceProduct page: 25–45 HP tractor power (basis not stated), 32 Y-blades, no hydraulic ram, weight including PTO shaft, price
LFP Series operator manual, Rev 1.3, printed pp17–20Rev 1.3 printed pp17–20: 120 cm / 47.2-in. cutting width, 210 kg weight
TMG Industrial official U.S. TFM60 product page — Current price, operation weight, width and shipping weightProduct page: 30–60 HP table, 60-in. cut, 650 lb operation weight, price
TMG TFM60/68/72 manual — cover v.2022.11.29; filename 2025.01.09 — p6 power; p11 hitch adjustment; p12 specificationsManual v.2022.11.29: p6 tractor must not exceed 50 PTO HP; 270 kg; 1,550 mm cutting width; handle-operated lateral hitch adjustment