The differences that matter.
01
An unstated range against a PTO range
Farmry lists LFP47 at 25–45 tractor hp without naming engine or PTO power. WoodMaxx’s manual lists FM-62 with hammers at 24–45 PTO hp.
A tractor with 31.5–33.5 PTO and 39.4 engine hp is inside both on any reading. Above 45 engine hp but under 45 PTO hp, only FM-62’s range is clear.
- Source: Specifications > Tractor Power Range; 32 Y-blades; Weight (includes PTO shaft); price ↗
- Source: Printed pp17–20: 120 cm / 47.2-in. cutting width, 210 kg weight, gear-oil specification ↗
- Source: Printed p40 / PDF p41: blade-specific PTO requirements, cutting width, hitch category, product weight ↗
02
47.2 inches against 55
Farmry’s manual gives LFP47 a 120-cm (47.2-inch) cutting width. WoodMaxx lists FM-62 at 55 inches.
On a 52.4-inch tractor, LFP47 leaves the rear-tire tracks uncut; FM-62 spans them at minimum width.
03
Y-blades against hammers
LFP47 is specified with 32 Y-blades; Farmry’s page describes hammers as a future option. FM-62 in this configuration carries hammers.
Y-blades suit grass and light growth; hammers suit heavier brush. Choose by the growth you mow, and confirm the blade set on the order.
- Source: Specifications > Tractor Power Range; 32 Y-blades; Weight (includes PTO shaft); price ↗
- Source: Printed pp17–20: 120 cm / 47.2-in. cutting width, 210 kg weight, gear-oil specification ↗
- Source: Hammer SKU FM-62-0006; mower-only and shaft weights; included slip-clutch shaft and gearbox oil; price ↗
04
464 lb against 774 lb
LFP47 is 464 lb including the PTO shaft on Farmry’s page (210 kg in the manual). WoodMaxx’s manual lists FM-62 at 774 lb product weight; its page lists 641 lb mower-only plus a 39-lb shaft.
FM-62 is about 300 lb heavier. Both are under a 1,598-lb lift at 24 inches; plan ballast on FM-62’s complete weight.
- Source: Specifications > Tractor Power Range; 32 Y-blades; Weight (includes PTO shaft); price ↗
- Source: Printed pp17–20: 120 cm / 47.2-in. cutting width, 210 kg weight, gear-oil specification ↗
- Source: Printed p40 / PDF p41: blade-specific PTO requirements, cutting width, hitch category, product weight ↗
- Source: Hammer SKU FM-62-0006; mower-only and shaft weights; included slip-clutch shaft and gearbox oil; price ↗
05
$2,199 against $3,630
LFP47 was observed at $2,199 and FM-62 hammer at $3,630 on November 7, 2026.
FM-62 cost $1,431 more on these dated observations for 7.8 more inches of cut and hammers.

