Farmry LFS45 vs LFP47: hammer blades or Y-blades in a compact cut?
LFP47 adds just 1.9 inches of manual-listed cutting width over LFS45, but changes the blade arrangement and adds about 109 lb of listed weight with the shaft. This is more than a choice between a 45-inch and a 47-inch label. Ask whether the supplied Y-blades suit your vegetation, then resolve the higher, unlabeled tractor-power range before considering the heavier mower.
By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test
LFS45: the lighter, narrower hammer optionConsider when the narrower hammer-equipped mower suits the task and the lower published weight is useful, after Farmry resolves horsepower basis and the tractor passes other checks.
LFP47: a fixed deck with Y-bladesConsider when a Y-blade setup suits regular grass/weed maintenance and the additional weight and higher power range are acceptable; confirm power basis and delivered parts.
Dated U.S. seller prices are shown with each product’s check date. Shipping, tax, options and current stock require a new seller quote. Open your saved comparison →
The differences that matter.
01
Blade configuration
LFS45: 16 hammer blades. LFP47: 32 Y-blades.
Choose the documented cutting setup for the vegetation task; blade counts across different designs are not a cut-quality ranking.
Consider when the narrower hammer-equipped mower suits the task and the lower published weight is useful, after Farmry resolves horsepower basis and the tractor passes other checks.
Consider when a Y-blade setup suits regular grass/weed maintenance and the additional weight and higher power range are acceptable; confirm power basis and delivered parts.
Both tractor-power ranges omit engine/PTO basis. The LFP47 gearbox rating is not its tractor minimum.
LFP47’s page says SAE90 EP while Rev 1.3 manual specifies SAE 85W-90 API GL-5. Resolve the supplied revision with Farmry.
Editorial review: November 7, 2026. New product sources were checked November 7; retained product evidence remains dated November 6 where noted in the source records. Selection advice interprets published specifications; no physical comparison was performed.
FOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.
