Farmry WCAP5 vs Woodland Mills TFG55: two light gravity chippers for small tractors
WCAP5 and TFG55 are light gravity-feed chippers for the same class of tractor, rated on different figures. A KIOTI CS2230H (16.7 PTO hp, 21 gross hp, 700-lb lift) is inside WCAP5’s 15–45 engine hp and TFG55’s 12–30 PTO hp, and both weigh well under its lift. TFG55 is lighter and stops at 30 PTO hp; WCAP5 runs up to 45 engine hp.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test
Consider WCAP5 if a bigger tractor may followShortlist WCAP5 when the tractor is inside 15–45 engine hp and you may move up to a larger tractor that would exceed TFG55’s 30-PTO-hp ceiling.
Consider TFG55 for the lightest loadShortlist TFG55 when the tractor has 15–30 PTO hp and the lightest rear load matters.
Observed U.S. seller prices, checked November 7, 2026 (TFG55), from the retained product records. Prices were not refreshed for this comparison. Tax, shipping, options and the final seller quote may change the delivered total; these are dated observations, not a live price or stock feed. The retained WCAP5 record does not carry a dated price observation; check Farmry’s current listing. Open your saved comparison →
The differences that matter.
01
Engine 15–45 against PTO 12–30
Farmry’s WCAP5 manual specifies 15–45 engine hp. Woodland Mills lists TFG55 at 12–30 PTO hp on its page and manual table, and 15–30 in the manual’s hitch paragraph.
A tractor with 17 PTO and 21 engine hp is inside both. Over 30 PTO hp, only WCAP5 stays in range; below 15 engine hp, only TFG55.
TFG55’s page and manual table give 12–30 PTO hp while its manual hitch paragraph gives 15–30.
WCAP5’s capacity is 5 inches fresh and 4 inches dry on the product page; the manual gives a single 5 × 9-inch opening.
This comparison reuses the manufacturer evidence retained in the product records reviewed November 7, 2026; product pages were not re-fetched on November 9. WCAP5 uses the Rev 1.5 manual and current product page; TFG55 uses the current page and the Rev B manual.
FOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.
