THE BUYING PERSPECTIVE
Know before you order.
- Current page and manual p9 give 12–30 PTO hp; manual p11 hitch paragraph gives 15–30. The numeric table reference is retained, but the source conflict prevents a preliminary match. Below 15 PTO hp, obtain the serial-applicable manufacturer requirement before selection.
- Web shipping section labels 346 lb as shipping weight; manual p9 distinguishes 346 lb product and 454 lb shipping. Use manual distinction.
- Official U.S. page and downloaded operator manual, not similarly named third-party domains.
- Confirm exact tractor model, transmission, model year and manual implement limits.
- Check three-point geometry, actual lift capacity at the implement load center, front ballast and axle limits.
- Check PTO shaft length, overlap, shielding and clearance across permitted hitch travel; quick hitches change geometry.
- For tractors below 15 PTO HP, resolve the manual range discrepancy before selecting.
Published specifications
- Power requirement
- 12–30 PTO hp in table; manual hitch paragraph says 15–30 — resolve before selection
- Rear PTO
- 540 rpm
- Three-point hitch
- Category 1
- max. chip diameter
- 5 inches
- Unit weight
- 346 lb — Product weight, Rev B manual p9
- Hydraulics
- Gravity feed; no hydraulic circuit.
- Accessories & setup
- Trimmable shear-bolt PTO shaft; Quick-hitch adapters; Measure and trim PTO shaft; Set bed plate clearance and inspect fasteners
Specifications are manufacturer-published, not measured by Acreage Equipment. A shipping weight is not treated as operating weight.
FOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 6, 2026. Confirm the current manual and the exact revision supplied with your machine.
