acreage.EQUIPMENT
Compare0Find equipment

THE ACREAGE EQUIPMENT FIELD GUIDE

Which tractors fit the Farmer-Helper FH-BX62S? Configurations near its limits

Farmer-Helper rates the FH-BX62S at 25–45 PTO hp; 142 of the 294 tractor configurations on this site are not excluded by its limits. The table lists the configurations closest to its power limits and weight, where the answer is most likely to change.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

PTO wood chippers at work
In this guide

THE DECISION IN NUMBERS

Configurations nearest the Farmer-Helper FH-BX62S’s limits

Within 3 hp of 25–45 PTO hp; up to 28 rows, sorted by PTO hp. Results from the site’s screen; † recorded source conflict.

Scroll the table sideways on smaller screens.

ConfigurationPTO hpEngine hpLift at 24 in.Screen result
John Deere 3033R HST †24.3322,200 lbExcluded: under minimum
John Deere 2032R HST †2530.81,356 lbNot excluded; conflict †
John Deere 3032E HST †25311,356 lbNot excluded; conflict †
TYM 3015 gear25302,425 lbNot excluded
TYM 3015 HST25302,425 lbNot excluded
Yanmar YM232 gear †25.531.81,609 lbNot excluded; conflict †
Massey Ferguson MF 1M.35 HST25.736.22,535 lbNot excluded
Mahindra 1635 HST2636.21,720 lbNot excluded
Kubota L3302 HST26.1331,435 lbNot excluded
LS MT232E HST26.231.71,433 lbNot excluded
Case IH Farmall 55C HST44552,756 lbNot excluded
LS MT355E HST †44552,425 lbNot excluded; conflict †
New Holland Boomer 55 HST44552,116 lbNot excluded
TYM 5520 gear44552,425 lbNot excluded
TYM 5520 HST44552,425 lbNot excluded
LS MT352 gear †44.2522,469 lbExcluded: hitch category
Massey Ferguson MF 2M.60 HST44.660.33,086 lbNot excluded
TYM T574 gear †44.7553,050.6 lbNot excluded; conflict †
KIOTI DK6020SEH HST †44.957.72,716 lbExcluded: hitch category
Case IH Farmall 50A gear45522,310 lbNot excluded
Case IH Farmall Utility 50A gear45532,701 lbNot excluded
Massey Ferguson MF 2E.60 HST †45.357.32,425 lbExcluded: over maximum
John Deere 5060E open station45.6603,192 lbExcluded: over maximum
LS MT357 HST †45.6572,469 lbExcluded: hitch category
TYM T554 gear45.655.92,945 lbExcluded: over maximum
KIOTI NX5510 gear †46553,177 lbExcluded: over maximum
Massey Ferguson MF 2605H gear46552,755 lbExcluded: over maximum
Case IH Farmall 55A HST46.4572,310 lbExcluded: over maximum
Sources for this decision table (29)

The published range

Farmer-Helper lists the FH-BX62S at 25–45 PTO hp. Farmer-Helper gives the range in PTO horsepower, so this site compares each tractor’s published PTO rating.

How 294 configurations screen

Of the 294 tractor configurations profiled on this site, 142 are not excluded, 66 fall under the minimum, 51 are over the maximum and 35 have a Category 2-only hitch. Not excluded is not approval: most pairings still need the maker or dealer to confirm the setup.

By brand

Configurations not excluded, by brand: Case IH 19 of 31; John Deere 15 of 39; KIOTI 17 of 37; Kubota 15 of 39; LS 13 of 32; Mahindra 7 of 17; Massey Ferguson 13 of 29; New Holland 16 of 18; TYM 19 of 37; Yanmar 8 of 15.

Closest exclusions

The configurations closest to the line are just under the minimum: John Deere 3033R HST † (24.3 PTO hp), Mahindra 1626 gear † (21.5 PTO hp), TYM 2515 gear (21 PTO hp); just over the maximum: Massey Ferguson MF 2E.60 HST † (45.3 PTO hp), TYM T554 gear (45.6 PTO hp), John Deere 5060E open station (45.6 PTO hp). A newer spec sheet, a different transmission or the maker’s confirmation can change these.

Weight and hitch

No product weight is retained for the FH-BX62S, so the screen applies no lift check. Get the complete weight with the PTO shaft from the seller and compare it with the tractor’s lift 24 inches behind the hitch. It mounts on a Category 1 hitch, so Category 2-only tractors are excluded.

Take these questions with you.

  1. Which exact configuration and transmission is the tractor?
  2. Does Farmer-Helper confirm the FH-BX62S at the tractor’s rating?
  3. What is the complete weight with the PTO shaft?
  4. What does the dealer list for lift 24 inches behind the hitch?

Keep these questions with your exact tractor and attachment details.

Use these questions in my seller brief

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Official current FH-BX62S product page: exact SKU, USD price and conflicting power/weight text
  2. Official FH-BX62S series page: self feed and current-manual link
  3. Current index-linked FH-BX42 & 62 manual, printed p2 / PDF p3
  4. Product-linked older manual, Revision 1-3-2018, p38
  5. Betstco official manual index
  6. John Deere 3033R current U.S. product page
  7. John Deere U.S. specification book, 5 May 2026 — 2032R 153ALV and 2025R 1511LV entries
  8. John Deere current U.S. 3032E product page and linked documents
  9. TYM 3015R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
  10. Yanmar 2025 YM2 Series brochure (PDF created March 21, 2025)Specifications: engine gross power, PTO power, 3-point hitch Category 1, 3-point lift capacity (std.) and at 24 in., transmission, total weight
  11. Massey Ferguson MF 1M Series spec sheet (PDF created November 6, 2025)p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight
  12. Mahindra USA 1600 Series brochure, Rev 09022025: PDF p5 tractor specifications (engine, PTO type and PTO hp by transmission, 3-point lift at 24 in., hydraulics, weight)PDF p5, Tractor Specifications: PTO and Hydraulic System rows
  13. Kubota 2026 Full Line Catalog
  14. LS New MT2E & MT2 Series Specifications 2026 (PDF created February 27, 2026)MT226E–MT242HE columns: Engine HP (gross), PTO HP, transmission, implement pump, Category I, hitch lift capacity (hitch end) 1,808 lb
  15. Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023)Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
  16. LS MT3E series brochure (PDF created October 3, 2025)p2 specifications: Engine HP (kW), PTO (HP) MT345E 38.2 / MT345HE 36.0 / MT355E 46.7 / MT355HE 44.0, Category (3pt hitch) CAT I, hitch lift capacity 2,910 lb
  17. New Holland WORKMASTER and Boomer compact tractor brochure (PDF created March 25, 2025)PDF p3 model table (gross hp, PTO hp gear/HST, lift); PDF p15 Boomer text (Category I three-point hitch); PDF p27 Boomer Series specifications (PTO hp, lift at ball ends and 24 in., category, width, weight)
  18. TYM 5520R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
  19. LS Tractor MT3 Series brochure (LS-Tractor-Brochure_MT3_Update_v5, PDF dated July 18, 2025): p2 MT342 / MT347 / MT352 / MT357 specificationsp2 Specifications table: Engine HP (gross), PTO (HP) by column, Total Flow, Category (3pt Hitch), Hitch Lift Capacity Hitch End, Total Weight
  20. Massey Ferguson MF 2M Series spec sheet (PDF created November 3, 2025)p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight
  21. TYM Catalog 2025 – Series 4 (PDF modified August 14, 2025)p11 T494 and p13 T574 key specifications; p24 Specification Guide, T494 and T574 columns
  22. KIOTI DK20 / DK20SE brochure (PDF created September 17, 2025)Printed/PDF pp6–7 specifications: Engine Gross, PTO hp, pump capacity, 3-point hitch, Maximum Lifting Capacity* (@ 24 in. aft of hitch), remote valves, width
  23. Case IH Farmall Compact A specification sheet, models 35A–55A (PDF created August 24, 2026)Specifications: Engine HP, PTO HP (Mechanical Trans. / Hydrostatic Trans.), 3pt Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, implement and total flow, weight
  24. Case IH Farmall utility tractors brochure (PDF created August 21, 2026)Small Utility Specifications: Engine HP, PTO HP, 3-point Hitch Category 1/2, Lift Capacity (footnote 2: measured @ 24 in. behind pin), transmission, weight
  25. Massey Ferguson MF 2E Series spec sheet MF25SST002FCv03 (©2025, PDF modified October 28, 2025)p1 feature list (Cat 1 rear hitch); p2 Technical Specifications: rated engine power, PTO power @ 540 rpm (Mech / HST), transmission rows, flows, Cat 1 & 2, lift capacities, PTO type, width, base weight
  26. John Deere price pages, Tractors 5050E/5060E/5067E/5075E (5 November 2025): 5060E Open Operator Station Utility Tractor (06C0LV)06C0LV base equipment: 60 97/68/EC engine horsepower; 45.6 PTO horsepower @ 2,100 rpm; 3-Point (Category II) Hitch with Sway Bars - Convertible to Category I
  27. TYM T554 North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
  28. KIOTI NX Series brochure (PDF created September 18, 2025)p12 Specifications: Engine Gross hp, PTO hp by model and transmission, pump capacity, 3-point hitch category, maximum lift capacity (footnote: @ 24 in. aft of hitch), width, weight
  29. Massey Ferguson MF 2600 H Series brochure (PDF created June 8, 2023)Printed p7 Technical Specifications: rated engine and PTO power, transmission, rear PTO (live / independent), 3-point lift capacity @ pins and @ 24 in. behind, ROPS weight

EQUIPMENT IN THIS GUIDE

Check prices and fit for the attachments discussed.

MAKE THE NEXT CHECK

Continue with the related decision.

FIELD GUIDE

Attachment weight vs. tractor lift capacity

A product weight below a three-point lift rating is only the start of a load check. The two figures may describe different measuring points, configurations or operating conditions. Subtracting them does not produce an approved safety margin.

Read the guide →FIELD GUIDE

Meeting an attachment’s minimum PTO horsepower exactly: what zero margin means

A tractor whose PTO rating equals or barely exceeds an attachment’s minimum is inside the published range, and nothing more. Several makers attach separate capacity statements well above their minimums. When the margin is zero or one horsepower, also check the source of each number and what the maker expects at that power.

Read the guide →FIELD GUIDE

When the tractor is too strong: attachment maximum horsepower

Most horsepower checks look at the minimum. Many small chippers and flail mowers also publish a maximum, and a larger tractor can be outside the range for a lighter attachment. Treat the maximum as a published limit with its own horsepower basis. Ask the maker before assuming a light attachment is the safe choice.

Read the guide →

MAKE THE TRADEOFFS CLEAR

Read a focused comparison.

SIDE BY SIDE

Farmer-Helper FH-BX62S vs WoodMaxx WM-8H: 6.5-inch gravity or 8-inch hydraulic feed

Compact tractor at 25–45 PTO hp: FH-BX62S or WM-8H?

Read the guide →SIDE BY SIDE

Farmer-Helper FH-BX62S vs Woodland Mills WC46: gravity feed or hydraulic feed between 25 and 30 PTO hp

Tractor at 25–30 PTO hp: FH-BX62S or WC46?

Read the guide →SIDE BY SIDE

Farmer-Helper FH-BX62S vs Farmry WCAP5 PRO: 25–45 or 15–45 PTO hp

Compact tractor under 45 PTO hp: FH-BX62S or WCAP5 PRO?

Read the guide →
See all Farmer-Helper FH-BX62S comparisons →