THE ACREAGE EQUIPMENT FIELD GUIDE
Which tractors fit the Farmer-Helper FH-EFGC125 hammer? Configurations near its limits
Farmer-Helper rates the FH-EFGC125 hammer at 22–65 PTO hp; 189 of the 294 tractor configurations on this site are not excluded by its limits. The table lists the configurations closest to its power limits and weight, where the answer is most likely to change.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

THE DECISION IN NUMBERS
Configurations nearest the Farmer-Helper FH-EFGC125 hammer’s limits
Within 3 hp of 22–65 PTO hp; up to 28 rows, sorted by PTO hp. Results from the site’s screen; † recorded source conflict.
Scroll the table sideways on smaller screens.
| Configuration | PTO hp | Engine hp | Lift at 24 in. | Screen result |
|---|---|---|---|---|
| KIOTI CS2530H HST | 19.3 | 24.5 | 700 lb | Excluded: under minimum |
| KIOTI CX2510 gear | 19.3 | 24.5 | 1,203 lb | Excluded: under minimum |
| LS MT225S HST † | 19.3 | 24.7 | 1,323 lb | Excluded: under minimum |
| John Deere 3025E HST † | 19.4 | 24 | 1,356 lb | Excluded: under minimum |
| Kubota B2601 HST † | 19.4 | 23.3 | 1,411 lb | Excluded: under minimum |
| Kubota LX2620 HST † | 19.4 | 23.3 | 1,676 lb | Excluded: under minimum |
| KIOTI CK2620 gear † | 19.5 | 24.5 | 1,631 lb | Excluded: under minimum |
| Massey Ferguson GC1725M HST † | 19.6 | 24.5 | 661 lb | Excluded: under minimum |
| Kubota L2502 gear † | 19.8 | 23.3 | 1,389 lb | Excluded: under minimum |
| Massey Ferguson 1825E gear † | 20.4 | 24 | 1,598 lb | Excluded: under minimum |
| Kubota L2501 gear | 20.5 | 24.8 | 1,389 lb | Excluded: under minimum |
| John Deere 3025D gear | 20.7 | 24.72 | 1,670 lb | Excluded: under minimum |
| TYM 2400 gear | 21 | 24 | 974 lb | Excluded: under minimum |
| TYM 2400 HST | 21 | 24 | 974 lb | Excluded: under minimum |
| TYM 2515 gear | 21 | 24 | 2,425 lb | Excluded: under minimum |
| TYM 2515 HST | 21 | 24 | 2,425 lb | Excluded: under minimum |
| Mahindra 1626 gear † | 21.5 | 24.8 | 1,720 lb | Excluded: under minimum |
| John Deere 3033R HST † | 24.3 | 32 | 2,200 lb | Not excluded; conflict † |
| TYM T5068 power shuttle cab | 62.7 | 68 | 3,153 lb | Excluded: hitch category |
| LS MT473 gear | 62.9 | 73 | 3,483 lb | Excluded: hitch category |
| LS MT473 power shuttle | 62.9 | 73 | 3,483 lb | Excluded: hitch category |
| KIOTI RX7320 power shuttle † | 63 | 73 | 3,898 lb | Excluded: hitch category |
| Massey Ferguson MF 2607H gear | 64 | 74 | 2,755 lb | Not excluded |
| TYM T754 gear cab | 64.1 | 74 | 3,418 lb | Excluded: hitch category |
| Yanmar SM475 power shuttle cab | 64.1 | 74 | 3,418 lb | Excluded: hitch category |
| LS MT774 power shuttle cab | 65.6 | 73.7 | 5,181 lb | Excluded: hitch category |
| Massey Ferguson MF 4708 power shuttle | 67 | 80 | 4,850 lb | Excluded: hitch category |
| TYM T5075 power shuttle cab | 67.1 | 74.3 | 3,418 lb | Excluded: hitch category |
Sources for this decision table (27)
- Official Betstco FH-EFGC125 product page: exact model, current USD offer, dimensions and conflicting specifications ↗
- Currently linked EFGC standard manual, Revision 12-12-17, pp16–23 ↗
- Official EFGC series: fixed models and separate hydraulic-offset kits ↗
- Official Betstco manual index ↗
- KIOTI CS10/CS20/CS30 brochure (PDF created August 27, 2026) ↗PDF p12 CS30 specifications: Engine Gross, PTO hp, rated revolution 3,000 rpm, Category I, Maximum Lifting Capacity* 700 lb (*@ 24 in. aft of hitch), weight
- KIOTI CX Series brochure (PDF created September 18, 2025) ↗Specifications: Engine Gross HP 24.5, PTO HP 19.3 (manual) / 18.8 (HST), PTO type transmission/live, Category I, Maximum Lifting Capacity* 1,203 lb, weight
- Current LS Tractor USA MT225S page — exact HST specifications and optional rear outlets ↗
- John Deere current U.S. 3025E product page and linked documents ↗
- Kubota 2026 Full Line Catalog ↗
- KIOTI CK20 / CK20SE brochure, printed page 6 ↗
- Massey Ferguson GC1700 U.S. brochure, May 2023 — printed/PDF p 10 ↗
- Massey Ferguson U.S. E Series brochure MF20B008DS, copyright 2020 — pp 2–7 ↗
- Kubota L2501 U.S. brochure, December 2014 ↗
- John Deere 3 Series compact utility tractor brochure 3928957 (PDF created July 24, 2025) ↗Specifications: 3025D/3035D/3043D horsepower (SAE J1995), PTO HP geared transmission, lift capacity 24 in. behind center link 1,670 lb, Category 1, gear 8F-8R, transmission-driven PTO with overrunning clutch, weight
- TYM 2400R North America product brochure (PDF created August 2025) ↗PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
- TYM 2515R North America product brochure (PDF created August 2025) ↗PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
- Mahindra USA 1600 Series brochure, Rev 09022025: PDF p5 tractor specifications (engine, PTO type and PTO hp by transmission, 3-point lift at 24 in., hydraulics, weight) ↗PDF p5, Tractor Specifications: PTO and Hydraulic System rows
- John Deere 3033R current U.S. product page ↗
- TYM T5068 North America product brochure (PDF created January 2026) ↗PDF p5 specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
- LS MT4 series brochure (PDF created July 18, 2025) ↗p2 MT4 Series Specifications: Engine HP (gross) 63 / 73, PTO (HP) 54.1 / 62.9, 540/540E, Category (3pt hitch) CAT II, hitch lift capacity 3,483 lb @ 24 in. from the hitch end
- KIOTI RX20/RX40 brochures (PDF created November 6, 2025) ↗RX20 specifications: Engine Gross HP 66.0 / 73.0, PTO HP 57.6 / 63.0, power shuttle, Category II, Maximum Lifting Capacity* 3,594 / 3,898 lb (* @ 24 in. aft of hitch), weight with AG tires
- Massey Ferguson MF 2600 H Series brochure (PDF created June 8, 2023) ↗Printed p7 Technical Specifications: rated engine and PTO power, transmission, rear PTO (live / independent), 3-point lift capacity @ pins and @ 24 in. behind, ROPS weight
- TYM T754 North America product brochure (PDF created August 2025) ↗PDF p5 specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
- Yanmar SM Series brochure (PDF created September 11, 2024) ↗Specifications: engine gross power, PTO power, rated engine speed, 3-point hitch category, 3-point lift capacity (std.) and at 24 in., transmission, total weight
- LS MT7 series brochure (PDF created September 25, 2025), linked from the current MT774CPS and MT7101CPS pages ↗p2 specifications: Engine HP (kW) 73.7 (55) / 100.6 (75); PTO HP 65.6 / 85.5; independent PTO 540/750/1,000; CAT II; hitch lift capacity 7,275 / 8,378 lb; overall width 78.7 in.; weight 7,827 / 7,985 lb
- AGCO MF 4700 Platform and Cab standard-features sheets (October 2025, F.O.B. port of entry), on AGCO’s dealer configurator ↗Horsepower (Max Engine @ 2000 RPM; Rated Engine & PTO @ 2200 RPM) per model, platform pp1 and cab p3; PTO independent 540/540E; Rear Linkage: ASAE Category II with telescopic ball ends, lift capacity at 24 in. 4,850 lb (2,200 kg)
- TYM Catalog 2026 – Series 5 brochure (PDF created February 8, 2026), linked from the current T5074 and T5075 pages ↗p11 Specification Guide, T5075: engine power 74.3 hp; PTO power 67.1 hp; F16 x R16; Category II; hitch lift printed 5,515 lb | 2,320 kg; 3,418 lb at 24 in. behind link ends; PTO 540/750; width 92.3 in.
The published range
Farmer-Helper lists the FH-EFGC125 hammer at 22–65 PTO hp. Farmer-Helper gives the range in PTO horsepower, so this site compares each tractor’s published PTO rating.
How 294 configurations screen
Of the 294 tractor configurations profiled on this site, 189 are not excluded, 65 fall under the minimum, 5 are over the maximum and 35 have a Category 2-only hitch. Not excluded is not approval: most pairings still need the maker or dealer to confirm the setup.
By brand
Configurations not excluded, by brand: Case IH 28 of 31; John Deere 26 of 39; KIOTI 19 of 37; Kubota 25 of 39; LS 14 of 32; Mahindra 10 of 17; Massey Ferguson 20 of 29; New Holland 17 of 18; TYM 20 of 37; Yanmar 10 of 15.
Closest exclusions
The configurations closest to the line are just under the minimum: Mahindra 1626 gear † (21.5 PTO hp), TYM 2515 gear (21 PTO hp), TYM 2515 HST (21 PTO hp); just over the upper limit: John Deere 5090E open station (75 PTO hp), John Deere 5090E power shuttle cab (75 PTO hp), John Deere 5100E open station (85 PTO hp). A newer spec sheet, a different transmission or the maker’s confirmation can change these.
Weight and hitch
No product weight is retained for the FH-EFGC125 hammer, so the screen applies no lift check. Get the complete weight with the PTO shaft from the seller and compare it with the tractor’s lift 24 inches behind the hitch. It mounts on a Category 1 hitch, so Category 2-only tractors are excluded.
Take these questions with you.
- Which exact configuration and transmission is the tractor?
- Does Farmer-Helper confirm the FH-EFGC125 hammer at the tractor’s rating?
- What is the complete weight with the PTO shaft?
- What does the dealer list for lift 24 inches behind the hitch?
Keep these questions with your exact tractor and attachment details.
Use these questions in my seller briefFOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.
- Official Betstco FH-EFGC125 product page: exact model, current USD offer, dimensions and conflicting specifications
- Currently linked EFGC standard manual, Revision 12-12-17, pp16–23
- Official EFGC series: fixed models and separate hydraulic-offset kits
- Official Betstco manual index
- KIOTI CS10/CS20/CS30 brochure (PDF created August 27, 2026)PDF p12 CS30 specifications: Engine Gross, PTO hp, rated revolution 3,000 rpm, Category I, Maximum Lifting Capacity* 700 lb (*@ 24 in. aft of hitch), weight
- KIOTI CX Series brochure (PDF created September 18, 2025)Specifications: Engine Gross HP 24.5, PTO HP 19.3 (manual) / 18.8 (HST), PTO type transmission/live, Category I, Maximum Lifting Capacity* 1,203 lb, weight
- Current LS Tractor USA MT225S page — exact HST specifications and optional rear outlets
- John Deere current U.S. 3025E product page and linked documents
- Kubota 2026 Full Line Catalog
- KIOTI CK20 / CK20SE brochure, printed page 6
- Massey Ferguson GC1700 U.S. brochure, May 2023 — printed/PDF p 10
- Massey Ferguson U.S. E Series brochure MF20B008DS, copyright 2020 — pp 2–7
- Kubota L2501 U.S. brochure, December 2014
- John Deere 3 Series compact utility tractor brochure 3928957 (PDF created July 24, 2025)Specifications: 3025D/3035D/3043D horsepower (SAE J1995), PTO HP geared transmission, lift capacity 24 in. behind center link 1,670 lb, Category 1, gear 8F-8R, transmission-driven PTO with overrunning clutch, weight
- TYM 2400R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
- TYM 2515R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
- Mahindra USA 1600 Series brochure, Rev 09022025: PDF p5 tractor specifications (engine, PTO type and PTO hp by transmission, 3-point lift at 24 in., hydraulics, weight)PDF p5, Tractor Specifications: PTO and Hydraulic System rows
- John Deere 3033R current U.S. product page
- TYM T5068 North America product brochure (PDF created January 2026)PDF p5 specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
- LS MT4 series brochure (PDF created July 18, 2025)p2 MT4 Series Specifications: Engine HP (gross) 63 / 73, PTO (HP) 54.1 / 62.9, 540/540E, Category (3pt hitch) CAT II, hitch lift capacity 3,483 lb @ 24 in. from the hitch end
- KIOTI RX20/RX40 brochures (PDF created November 6, 2025)RX20 specifications: Engine Gross HP 66.0 / 73.0, PTO HP 57.6 / 63.0, power shuttle, Category II, Maximum Lifting Capacity* 3,594 / 3,898 lb (* @ 24 in. aft of hitch), weight with AG tires
- Massey Ferguson MF 2600 H Series brochure (PDF created June 8, 2023)Printed p7 Technical Specifications: rated engine and PTO power, transmission, rear PTO (live / independent), 3-point lift capacity @ pins and @ 24 in. behind, ROPS weight
- TYM T754 North America product brochure (PDF created August 2025)PDF p5 specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
- Yanmar SM Series brochure (PDF created September 11, 2024)Specifications: engine gross power, PTO power, rated engine speed, 3-point hitch category, 3-point lift capacity (std.) and at 24 in., transmission, total weight
- LS MT7 series brochure (PDF created September 25, 2025), linked from the current MT774CPS and MT7101CPS pagesp2 specifications: Engine HP (kW) 73.7 (55) / 100.6 (75); PTO HP 65.6 / 85.5; independent PTO 540/750/1,000; CAT II; hitch lift capacity 7,275 / 8,378 lb; overall width 78.7 in.; weight 7,827 / 7,985 lb
- AGCO MF 4700 Platform and Cab standard-features sheets (October 2025, F.O.B. port of entry), on AGCO’s dealer configuratorHorsepower (Max Engine @ 2000 RPM; Rated Engine & PTO @ 2200 RPM) per model, platform pp1 and cab p3; PTO independent 540/540E; Rear Linkage: ASAE Category II with telescopic ball ends, lift capacity at 24 in. 4,850 lb (2,200 kg)
- TYM Catalog 2026 – Series 5 brochure (PDF created February 8, 2026), linked from the current T5074 and T5075 pagesp11 Specification Guide, T5075: engine power 74.3 hp; PTO power 67.1 hp; F16 x R16; Category II; hitch lift printed 5,515 lb | 2,320 kg; 3,418 lb at 24 in. behind link ends; PTO 540/750; width 92.3 in.
