acreage.EQUIPMENT
Compare0Find equipment

THE ACREAGE EQUIPMENT FIELD GUIDE

Which tractors fit the Farmry HFS87? Configurations near its limits

Farmry rates the HFS87 at 30–85 hp (basis unspecified); 221 of the 294 tractor configurations on this site are not excluded by its limits. The table lists the configurations closest to its power limits and weight, where the answer is most likely to change.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Flail mowers at work
In this guide

THE DECISION IN NUMBERS

Configurations nearest the Farmry HFS87’s limits

Within 3 hp of 30–85 hp (basis unspecified) or near its weight; up to 28 rows, sorted by hp. Results from the site’s screen; † recorded source conflict.

Scroll the table sideways on smaller screens.

ConfigurationPTO hpEngine hpLift at 24 in.Screen result
John Deere 2032R HST †2530.81,356 lbNot excluded; conflict †
John Deere 3032E HST †25311,356 lbNot excluded; conflict †
TYM 3015 gear25302,425 lbNot excluded
TYM 3015 HST25302,425 lbNot excluded
Kubota L3302 HST26.1331,435 lbNot excluded
LS MT232E HST26.231.71,433 lbNot excluded
Kubota L3302 gear28331,435 lbNot excluded
LS MT335H HST28351,433 lbNot excluded
New Holland Boomer 35 HST28351,345 lbNot excluded
LS MT232E gear †28.531.71,433 lbNot excluded; conflict †
Case IH Farmall 35C gear29.7351,808 lbNot excluded
New Holland Boomer 35 gear29.7351,345 lbNot excluded
New Holland WORKMASTER 35 gear †29.7351,433 lbNot excluded; conflict †
Mahindra 1640 gear †29.938.71,720 lbNot excluded; conflict †
John Deere 2038R HST †3036.81,356 lbNot excluded; conflict †
John Deere 3038E HST †30371,356 lbNot excluded; conflict †
Massey Ferguson MF 1M.40 power shuttle3039.42,535 lbNot excluded
TYM 3515 gear30352,425 lbNot excluded
TYM 3515 HST30352,425 lbNot excluded
Case IH Farmall 35A HST30.1351,596 lbNot excluded
New Holland WORKMASTER 35C HST30.1351,596 lbNot excluded
TYM T394 gear †30.237.41,558 lbNot excluded; conflict †
Kubota L3902 HST30.337.51,435 lbNot excluded
John Deere 3035D gear30.434.71,670 lbNot excluded
LS MT340HC HST cab32401,433 lbNot excluded
New Holland WORKMASTER 40 HST †32401,433 lbNot excluded; conflict †
John Deere 5100E open station85100Not publishedNot excluded
John Deere 5100E power shuttle cab85100Not publishedNot excluded
Sources for this decision table (22)

The published range

Farmry lists the HFS87 at 30–85 hp (basis unspecified). Farmry does not say whether the range means engine or PTO horsepower, so this site excludes a tractor only when both figures fall outside it.

How 294 configurations screen

Of the 294 tractor configurations profiled on this site, 221 are not excluded, 65 fall under the minimum, 4 are over the maximum and 4 list less lift at 24 inches than its weight. Not excluded is not approval: most pairings still need the maker or dealer to confirm the setup.

By brand

Configurations not excluded, by brand: Case IH 28 of 31; John Deere 30 of 39; KIOTI 27 of 37; Kubota 22 of 39; LS 25 of 32; Mahindra 10 of 17; Massey Ferguson 24 of 29; New Holland 17 of 18; TYM 27 of 37; Yanmar 11 of 15.

Closest exclusions

The configurations closest to the line are just under the minimum: Mahindra 1126 HST (25.3 hp), Mahindra 2126 HST (25.3 hp), Kubota L2501 HST (24.8 hp); just over the upper limit: LS MT7101 power shuttle cab (85.5 hp), Massey Ferguson MF 4710 power shuttle (87 hp), Kubota M5-111 gear (89 hp). A newer spec sheet, a different transmission or the maker’s confirmation can change these.

Weight and hitch

This site retains a 1,299-lb weight for the HFS87. 4 configurations list less lift 24 inches behind the hitch than that and are excluded on weight alone; tractors with no published 24-inch lift are held for review. It mounts on a Category 1 and 2 hitch.

Take these questions with you.

  1. Which exact configuration and transmission is the tractor?
  2. Does Farmry confirm the HFS87 at the tractor’s rating?
  3. What is the complete weight with the PTO shaft?
  4. What does the dealer list for lift 24 inches behind the hitch?

Keep these questions with your exact tractor and attachment details.

Use these questions in my seller brief

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  2. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications
  3. John Deere U.S. specification book, 5 May 2026 — 2032R 153ALV and 2025R 1511LV entries
  4. John Deere current U.S. 3032E product page and linked documents
  5. TYM 3015R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
  6. Kubota 2026 Full Line Catalog
  7. LS New MT2E & MT2 Series Specifications 2026 (PDF created February 27, 2026)MT226E–MT242HE columns: Engine HP (gross), PTO HP, transmission, implement pump, Category I, hitch lift capacity (hitch end) 1,808 lb
  8. LS Tractor USA MT335H model pageSpecifications: Engine HP (Gross) 35, PTO HP 28.0, Synchro Shuttle/HST 12F/12R, independent 540 PTO, Category CAT I, Hitch Lift capacity (Hitch end) 1,808, total weight 3,285 lb
  9. New Holland WORKMASTER and Boomer compact tractor brochure (PDF created March 25, 2025)PDF p3 model table (gross hp, PTO hp gear/HST, lift); PDF p27 Boomer Series specifications (Boomer 35 and 40/40 CAB columns: PTO hp, 1,808 lb at ball ends, 1,345 lb at 24 in., Category I, width, weight)
  10. Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023)Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
  11. Mahindra USA 1600 Series brochure, Rev 09022025: PDF p5 tractor specifications (engine, PTO type and PTO hp by transmission, 3-point lift at 24 in., hydraulics, weight)PDF p5, Tractor Specifications: 1640 Shuttle / HST / HST Cab columns
  12. John Deere current U.S. 2038R page — source identity and brochure link
  13. John Deere current U.S. 3038E page — specifications and linked brochure
  14. Massey Ferguson MF 1M Series spec sheet (PDF created November 6, 2025)p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight
  15. TYM 3515R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
  16. Case IH Farmall Compact A specification sheet, models 35A–55A (PDF created August 24, 2026)Specifications: Engine HP, PTO HP (Mechanical Trans. / Hydrostatic Trans.), 3pt Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, implement and total flow, weight
  17. New Holland WORKMASTER 35C & 40C Compact Series brochure (PDF created February 26, 2026), linked from the current U.S. pagep13 Specifications: gross engine hp; PTO hp gear / HST; 3-Point Hitch Category 1; lift at ball ends and 24 in. behind ball ends; rear PTO type; hydraulic flow; width and weight. p2 overview table
  18. TYM T394 North America brochure, Aug 2025 — printed/PDF p 4
  19. John Deere 3 Series compact utility tractor brochure 3928957 (PDF created July 24, 2025)Specifications: 3025D/3035D/3043D horsepower (SAE J1995), PTO HP geared transmission, lift capacity 24 in. behind center link 1,670 lb, Category 1, gear 8F-8R, transmission-driven PTO with overrunning clutch, weight
  20. LS Tractor USA MT340HC model pageSpecifications: Engine HP (Gross) 40, PTO HP 32.0, HST 3 ranges, independent 540 PTO, Category CAT I, Hitch Lift capacity (Hitch end) 1,808, total weight 3,661 lb
  21. New Holland WORKMASTER 25/35/40 specification workbook (series-page download)Gross horsepower, PTO horsepower gear/HST, flows, lift at ball ends and 24 in., 3-point category, width, weight (WORKMASTER 40 column)
  22. John Deere price pages, Tractors 5090E/5090EL/5100E (5 November 2025): 5100E Open Operator Station Tractor (697TP)697TP base equipment: Rated Engine Power 100 hp; Rated PTO Power 85 hp (manufacturer’s rating, 2,400 rpm); independent 540/540E PTO; telescopic draft links with Category II balls; 12F x 12R PowrReverser base

EQUIPMENT IN THIS GUIDE

Check prices and fit for the attachments discussed.

MAKE THE NEXT CHECK

Continue with the related decision.

FIELD GUIDE

Attachment weight vs. tractor lift capacity

A product weight below a three-point lift rating is only the start of a load check. The two figures may describe different measuring points, configurations or operating conditions. Subtracting them does not produce an approved safety margin.

Read the guide →FIELD GUIDE

Choosing flail mower width for your tractor track

A mower’s model name is not a tire-coverage measurement. The useful comparison is actual cutting width against the outside rear-tire span of your tractor, plus the offset and overlap the job needs. Measure the machine you own before using a generic model recommendation.

Read the guide →FIELD GUIDE

Meeting an attachment’s minimum PTO horsepower exactly: what zero margin means

A tractor whose PTO rating equals or barely exceeds an attachment’s minimum is inside the published range, and nothing more. Several makers attach separate capacity statements well above their minimums. When the margin is zero or one horsepower, also check the source of each number and what the maker expects at that power.

Read the guide →