acreage.EQUIPMENT
Compare0Find equipment

THE ACREAGE EQUIPMENT FIELD GUIDE

Which tractors fit the Farmry LFS61? Configurations near its limits

Farmry rates the LFS61 at 15–35 hp (basis unspecified); 137 of the 294 tractor configurations on this site are not excluded by its limits. The table lists the configurations closest to its power limits and weight, where the answer is most likely to change.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Flail mowers at work
In this guide

THE DECISION IN NUMBERS

Configurations nearest the Farmry LFS61’s limits

Within 3 hp of 15–35 hp (basis unspecified) or near its weight; up to 28 rows, sorted by hp. Results from the site’s screen; † recorded source conflict.

Scroll the table sideways on smaller screens.

ConfigurationPTO hpEngine hpLift at 24 in.Screen result
John Deere 1023E HST †14.521758 lbNot excluded; conflict †
LS MT122 HST1521.5728 lbNot excluded
TYM T224 HST15.121.5679 lbNot excluded
Massey Ferguson 1835E HST27.634.51,598 lbNot excluded
Case IH Farmall 35C HST28351,808 lbNot excluded
LS MT335H HST28351,433 lbNot excluded
New Holland Boomer 35 HST28351,345 lbNot excluded
TYM 3620 gear †28352,425 lbNot excluded; conflict †
TYM 3620 HST †28352,425 lbNot excluded; conflict †
Kubota LX3520 HST †28.734.91,962 lbNot excluded; conflict †
KIOTI CK3520 HST †28.934.91,631 lbNot excluded; conflict †
Case IH Farmall 35C gear29.7351,808 lbNot excluded
New Holland Boomer 35 gear29.7351,345 lbNot excluded
New Holland WORKMASTER 35 gear †29.7351,433 lbNot excluded; conflict †
TYM 3515 gear30352,425 lbNot excluded
TYM 3515 HST30352,425 lbNot excluded
Case IH Farmall 35A HST30.1351,596 lbNot excluded
New Holland WORKMASTER 35C HST30.1351,596 lbNot excluded
John Deere 3035D gear30.434.71,670 lbNot excluded
KIOTI CK3520 gear †30.934.91,631 lbNot excluded; conflict †
Case IH Farmall 35A gear31351,596 lbNot excluded
New Holland WORKMASTER 35C gear31351,596 lbNot excluded
Case IH Farmall 40A HST †34.8401,596 lbNot excluded; conflict †
KIOTI CK4020 gear †34.839.61,631 lbNot excluded; conflict †
LS MT242E HST †34.842.51,433 lbNot excluded; conflict †
New Holland WORKMASTER 40C HST34.8401,596 lbNot excluded
LS MT242E gear †35.442.51,433 lbExcluded: over maximum
Yanmar YM347 gear35.5462,750 lbExcluded: over maximum
Sources for this decision table (19)

The published range

Farmry lists the LFS61 at 15–35 hp (basis unspecified). Farmry does not say whether the range means engine or PTO horsepower, so this site excludes a tractor only when both figures fall outside it.

How 294 configurations screen

Of the 294 tractor configurations profiled on this site, 137 are not excluded, 120 are over the maximum, 35 have a Category 2-only hitch and 2 have a manual width limit narrower than its cut. Not excluded is not approval: most pairings still need the maker or dealer to confirm the setup.

By brand

Configurations not excluded, by brand: Case IH 10 of 31; John Deere 18 of 39; KIOTI 17 of 37; Kubota 21 of 39; LS 10 of 32; Mahindra 12 of 17; Massey Ferguson 11 of 29; New Holland 11 of 18; TYM 17 of 37; Yanmar 10 of 15.

Closest exclusions

The configurations closest to the line are just over the upper limit: LS MT242E gear † (35.4 hp), Yanmar YM347 gear (35.5 hp), LS MT342 gear † (35.7 hp). A newer spec sheet, a different transmission or the maker’s confirmation can change these.

Weight and hitch

This site retains a 421-lb weight for the LFS61. No configuration that clears the power range lists less lift 24 inches behind the hitch than that; tractors with no published 24-inch lift are held for review. It mounts on a Category 1 hitch, so Category 2-only tractors are excluded.

Take these questions with you.

  1. Which exact configuration and transmission is the tractor?
  2. Does Farmry confirm the LFS61 at the tractor’s rating?
  3. What is the complete weight with the PTO shaft?
  4. What does the dealer list for lift 24 inches behind the hitch?

Keep these questions with your exact tractor and attachment details.

Use these questions in my seller brief

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Farmry official product specifications
  2. Farmry LFS Series operator manual, Rev 1.7 — Printed pp17–18 specifications; p28 tractor stability
  3. Farmry flail mower comparison table — Net-weight comparison; may exclude PTO shaft
  4. John Deere U.S. order book, 5 May 2026 — 1023E Sub-Compact Utility Tractor (0253LV)0253LV “1023E Sub-Compact Utility Tractor (15 PTO hp)”: Engine HP 22.4 (16.5 kW) PS, PTO HP 14.5 (11.4 kW), 3,200 rpm, 2-speed hydrostatic
  5. LS MT1 Series brochure (PDF created November 6, 2025)Specifications: Engine HP (gross) 21.5, PTO (HP) 15.0, CAT I, hitch lift capacity (hitch end) 992 lb (at 610 mm: 728), total weight 1,433 lb
  6. TYM T224 North America product brochure (PDF created August 2025)PDF p5 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
  7. Massey Ferguson U.S. E Series brochure MF20B008DS, copyright 2020 — pp 2–7
  8. Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023)Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
  9. LS Tractor USA MT335H model pageSpecifications: Engine HP (Gross) 35, PTO HP 28.0, Synchro Shuttle/HST 12F/12R, independent 540 PTO, Category CAT I, Hitch Lift capacity (Hitch end) 1,808, total weight 3,285 lb
  10. New Holland WORKMASTER and Boomer compact tractor brochure (PDF created March 25, 2025)PDF p3 model table (gross hp, PTO hp gear/HST, lift); PDF p27 Boomer Series specifications (Boomer 35 and 40/40 CAB columns: PTO hp, 1,808 lb at ball ends, 1,345 lb at 24 in., Category I, width, weight)
  11. TYM 3620R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
  12. Kubota current U.S. LX page — exact LX3520 model specifications
  13. KIOTI CK20 / CK20SE brochure, printed page 6
  14. TYM 3515R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
  15. Case IH Farmall Compact A specification sheet, models 35A–55A (PDF created August 24, 2026)Specifications: Engine HP, PTO HP (Mechanical Trans. / Hydrostatic Trans.), 3pt Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, implement and total flow, weight
  16. New Holland WORKMASTER 35C & 40C Compact Series brochure (PDF created February 26, 2026), linked from the current U.S. pagep13 Specifications: gross engine hp; PTO hp gear / HST; 3-Point Hitch Category 1; lift at ball ends and 24 in. behind ball ends; rear PTO type; hydraulic flow; width and weight. p2 overview table
  17. John Deere 3 Series compact utility tractor brochure 3928957 (PDF created July 24, 2025)Specifications: 3025D/3035D/3043D horsepower (SAE J1995), PTO HP geared transmission, lift capacity 24 in. behind center link 1,670 lb, Category 1, gear 8F-8R, transmission-driven PTO with overrunning clutch, weight
  18. LS New MT2E & MT2 Series Specifications 2026 (PDF created February 27, 2026)MT226E–MT242HE columns: Engine HP (gross), PTO HP, transmission, implement pump, Category I, hitch lift capacity (hitch end) 1,808 lb
  19. Yanmar YM3 brochure (PDF created June 29, 2021)Printed p16 specifications: engine (hp), PTO (hp), hitch category (SAE) Category 1 & 2, 3-point lift capacity 24 in. behind, ROPS weight, transmission

EQUIPMENT IN THIS GUIDE

Check prices and fit for the attachments discussed.

MAKE THE NEXT CHECK

Continue with the related decision.

FIELD GUIDE

Attachment weight vs. tractor lift capacity

A product weight below a three-point lift rating is only the start of a load check. The two figures may describe different measuring points, configurations or operating conditions. Subtracting them does not produce an approved safety margin.

Read the guide →FIELD GUIDE

Choosing flail mower width for your tractor track

A mower’s model name is not a tire-coverage measurement. The useful comparison is actual cutting width against the outside rear-tire span of your tractor, plus the offset and overlap the job needs. Measure the machine you own before using a generic model recommendation.

Read the guide →FIELD GUIDE

Meeting an attachment’s minimum PTO horsepower exactly: what zero margin means

A tractor whose PTO rating equals or barely exceeds an attachment’s minimum is inside the published range, and nothing more. Several makers attach separate capacity statements well above their minimums. When the margin is zero or one horsepower, also check the source of each number and what the maker expects at that power.

Read the guide →

MAKE THE TRADEOFFS CLEAR

Read a focused comparison.

SIDE BY SIDE

Farmry LFP47 vs LFS61: 25–45 hp or 15–35 hp

Farmry: LFP47 or LFS61?

Read the guide →SIDE BY SIDE

Farmry LFS45 vs LFS61: 45-inch or 61-inch on a sub-compact

Sub-compact: LFS45 or LFS61?

Read the guide →SIDE BY SIDE

Farmry LFS61 vs WoodMaxx FM-62 hammer: an unstated 15–35 hp range or 24–45 PTO hp near 30

My tractor has about 29 PTO and 40 engine hp: LFS61 or FM-62?

Read the guide →
See all Farmry LFS61 comparisons →