acreage.EQUIPMENT
Compare0Find equipment

THE ACREAGE EQUIPMENT FIELD GUIDE

Which tractors fit the Farmry WCAP5? Configurations near its limits

Farmry rates the WCAP5 at 15–45 engine hp, and 159 of the 294 tractor configurations on this site are not excluded by that range, its weight or its hitch. The table lists the configurations closest to its power limits and weight, where the answer is most likely to change.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

PTO wood chippers at work
In this guide

THE DECISION IN NUMBERS

Configurations nearest the Farmry WCAP5’s limits

Within 3 hp of 15–45 engine hp or near its weight; up to 28 rows, sorted by engine hp. Results from the site’s screen; † recorded source conflict.

Scroll the table sideways on smaller screens.

ConfigurationPTO hpEngine hpLift at 24 in.Screen result
Kubota BX1880 HST13.716.6680 lbNot excluded
LS MT242E gear †35.442.51,433 lbNot excluded; conflict †
LS MT242E HST †34.842.51,433 lbNot excluded; conflict †
John Deere 4044M HST †33.6432,500 lbNot excluded; conflict †
John Deere 4044R HST †33.643.12,500 lbNot excluded; conflict †
Kubota L4470 Premium HST36.2442,756 lbNot excluded
KIOTI DK4520 gear †38.944.92,716 lbNot excluded; conflict †
KIOTI DK4720SEH HST †33.444.92,716 lbNot excluded; conflict †
KIOTI NS4710 gear †36.644.92,493 lbNot excluded; conflict †
KIOTI NS4710 HST †36.344.92,493 lbNot excluded; conflict †
Case IH Farmall 45C gear38.2452,756 lbNot excluded
Case IH Farmall 45C HST36452,756 lbNot excluded
John Deere 3046R HST †34.1452,200 lbNot excluded; conflict †
KIOTI NX4510 gear37.6453,177 lbNot excluded
KIOTI NX4510 HST33.9453,177 lbNot excluded
LS MT345E gear †38.2452,425 lbNot excluded; conflict †
LS MT345E HST †36452,425 lbNot excluded; conflict †
Mahindra 5145 gear38453,748 lbNot excluded
Massey Ferguson MF 2604H gear38452,204 lbNot excluded
New Holland Boomer 45 gear38.2452,116 lbNot excluded
New Holland Boomer 45 HST36452,116 lbNot excluded
Yanmar YM347 gear35.5462,750 lbExcluded: over maximum
Yanmar YT347 i-HMT39.5462,756 lbExcluded: over maximum
TYM T454 gear37.346.62,945 lbExcluded: over maximum
Case IH Farmall 45A gear40.6472,310 lbExcluded: over maximum
Case IH Farmall 45A HST38.3472,310 lbExcluded: over maximum
LS MT347 gear †39.9472,469 lbExcluded: over maximum
LS MT347 HST †37.6472,469 lbExcluded: over maximum
Sources for this decision table (21)

The published range

Farmry lists the WCAP5 at 15–45 engine hp. Farmry gives the range in engine horsepower, so this site compares each tractor’s engine rating, not its PTO rating.

How 294 configurations screen

Of the 294 tractor configurations profiled on this site, 159 are not excluded and 135 are over the maximum. Not excluded is not approval: most pairings still need the maker or dealer to confirm the setup.

By brand

Configurations not excluded, by brand: Case IH 13 of 31; John Deere 19 of 39; KIOTI 21 of 37; Kubota 22 of 39; LS 16 of 32; Mahindra 13 of 17; Massey Ferguson 12 of 29; New Holland 14 of 18; TYM 19 of 37; Yanmar 10 of 15.

Closest exclusions

The configurations closest to the line are just over the maximum: Yanmar YM347 gear (46 engine hp), Yanmar YT347 i-HMT (46 engine hp), TYM T454 gear (46.6 engine hp). A newer spec sheet, a different transmission or the maker’s confirmation can change these.

Weight and hitch

This site retains a 412-lb weight for the WCAP5. No configuration that clears the power range lists less lift 24 inches behind the hitch than that; tractors with no published 24-inch lift are held for review. It mounts on a Category 1 and 2 hitch.

Take these questions with you.

  1. Which exact configuration and transmission is the tractor?
  2. Does Farmry confirm the WCAP5 at the tractor’s rating?
  3. What is the complete weight with the PTO shaft?
  4. What does the dealer list for lift 24 inches behind the hitch?

Keep these questions with your exact tractor and attachment details.

Use these questions in my seller brief

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Farmry official product specifications
  2. Farmry WCAP5 operator manual, Rev 1.5 — Printed pp19–20 specifications; pp30–34 driveline checks
  3. Kubota 2026 full-line catalogPrinted p2: BX series table: horsepower (gross)* SAE J1995, horsepower (PTO), Category I, lift capacity 24" behind pin 680 lb, tractor weight
  4. LS New MT2E & MT2 Series Specifications 2026 (PDF created February 27, 2026)MT226E–MT242HE columns: Engine HP (gross), PTO HP, transmission, implement pump, Category I, hitch lift capacity (hitch end) 1,808 lb
  5. John Deere 4044M current U.S. product page
  6. John Deere U.S. order book, 5 May 2026 — 4044R base machine (032ALV)Order code 032ALV: engine 43.1 hp gross SAE J1995, PTO 32.5 hp, HST 3-range
  7. KIOTI DK4520 current U.S. product page
  8. KIOTI DK20 / DK20SE brochure (PDF created September 17, 2025)Printed/PDF pp6–7 specifications: Engine Gross, PTO hp, pump capacity, 3-point hitch, Maximum Lifting Capacity* (@ 24 in. aft of hitch), remote valves, width
  9. KIOTI NS Series brochure (PDF created September 12, 2025)PDF p12 Specifications: Engine Gross and PTO hp by model, pump capacity, 3-point hitch category, Maximum Lifting Capacity* (footnote: @ 24 in. aft of hitch), width, weight
  10. Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023)Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
  11. John Deere 3046R current U.S. product page
  12. KIOTI NX Series brochure (PDF created September 18, 2025)p12 Specifications: Engine Gross hp, PTO hp by model and transmission, pump capacity, 3-point hitch category, maximum lift capacity (footnote: @ 24 in. aft of hitch), width, weight
  13. LS MT3E series brochure (PDF created October 3, 2025)p2 specifications: Engine HP (kW), PTO (HP) MT345E 38.2 / MT345HE 36.0 / MT355E 46.7 / MT355HE 44.0, Category (3pt hitch) CAT I, hitch lift capacity 2,910 lb
  14. Mahindra 5100 Series brochure (PDF created July 2022)Specifications: Engine HP (kW) @ RPM, PTO HP, 3-point linkage category, 3-point lift capacity, overall width, weight
  15. Massey Ferguson MF 2600 H Series brochure (PDF created June 8, 2023)Printed p7 Technical Specifications: rated engine and PTO power, transmission, rear PTO (live / independent), 3-point lift capacity @ pins and @ 24 in. behind, ROPS weight
  16. New Holland WORKMASTER and Boomer compact tractor brochure (PDF created March 25, 2025)PDF p3 model table (gross hp, PTO hp gear/HST, lift); PDF p15 Boomer text (Category I three-point hitch); PDF p27 Boomer Series specifications (PTO hp, lift at ball ends and 24 in., category, width, weight)
  17. Yanmar YM3 brochure (PDF created June 29, 2021)Printed p16 specifications: engine (hp), PTO (hp), hitch category (SAE) Category 1 & 2, 3-point lift capacity 24 in. behind, ROPS weight, transmission
  18. Yanmar 2023 YT3 sell sheet (PDF created October 3, 2023)Specifications: Gross Power 46 / 58.9 HP; PTO Power at Working Speed 39.5 / 52.0 HP; PTO Power at Zero Speed 36.4 / 48.9 HP; 3-point hitch Category 1; 3-point lift capacity (std.) 3,307 lbf; at 24" (61 cm) 2,756 lbf
  19. TYM T454 North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
  20. Case IH Farmall Compact A specification sheet, models 35A–55A (PDF created August 24, 2026)Specifications: Engine HP, PTO HP (Mechanical Trans. / Hydrostatic Trans.), 3pt Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, implement and total flow, weight
  21. LS Tractor MT3 Series brochure (LS-Tractor-Brochure_MT3_Update_v5, PDF dated July 18, 2025): p2 MT342 / MT347 / MT352 / MT357 specificationsp2 Specifications table: Engine HP (gross), PTO (HP) by column, Total Flow, Category (3pt Hitch), Hitch Lift Capacity Hitch End, Total Weight

EQUIPMENT IN THIS GUIDE

Check prices and fit for the attachments discussed.

MAKE THE NEXT CHECK

Continue with the related decision.

FIELD GUIDE

Attachment weight vs. tractor lift capacity

A product weight below a three-point lift rating is only the start of a load check. The two figures may describe different measuring points, configurations or operating conditions. Subtracting them does not produce an approved safety margin.

Read the guide →FIELD GUIDE

Meeting an attachment’s minimum PTO horsepower exactly: what zero margin means

A tractor whose PTO rating equals or barely exceeds an attachment’s minimum is inside the published range, and nothing more. Several makers attach separate capacity statements well above their minimums. When the margin is zero or one horsepower, also check the source of each number and what the maker expects at that power.

Read the guide →FIELD GUIDE

When the tractor is too strong: attachment maximum horsepower

Most horsepower checks look at the minimum. Many small chippers and flail mowers also publish a maximum, and a larger tractor can be outside the range for a lighter attachment. Treat the maximum as a published limit with its own horsepower basis. Ask the maker before assuming a light attachment is the safe choice.

Read the guide →

MAKE THE TRADEOFFS CLEAR

Read a focused comparison.

SIDE BY SIDE

Farmry WCAP5 vs WoodMaxx WM-8H: $1,698 gravity feed or $4,095 hydraulic feed

Budget 5-inch or full-featured 8-inch: WCAP5 or WM-8H?

Read the guide →SIDE BY SIDE

Farmer-Helper FH-BX42 vs Farmry WCAP5: PTO-rated or engine-rated at the same price

Small tractor, about $1,700: FH-BX42 or WCAP5?

Read the guide →SIDE BY SIDE

Farmry WCAP5 vs WoodMaxx MX-8800: a 45-hp-capped gravity chipper or an 8-inch hydrostatic feed

My tractor is about 45 engine hp: WCAP5 or MX-8800?

Read the guide →
See all Farmry WCAP5 comparisons →