THE ACREAGE EQUIPMENT FIELD GUIDE
Will a flail mower fit through the gate? Check overall width
Cutting width describes the swath, not the space the mower occupies. Two 60-inch cutters can have different body widths, and a model number is not an access measurement. Before choosing a mower for an enclosed yard or storage bay, compare the actual clear opening with a confirmed drawing of the complete machine in the configuration you intend to move and store.
By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test
THE DECISION IN NUMBERS
Worked screen for a hypothetical 72-inch clear opening
The opening is hypothetical; mower widths are manufacturer-listed. Differences assume a straight, aligned width comparison, not a route assessment or safe-clearance rule. A positive difference does not approve passage. The WoodMaxx conflict is intentionally left unresolved.
Scroll the table sideways on smaller screens.
| Mower | Cut / listed overall width | 72-inch opening minus overall width | Limited conclusion |
|---|---|---|---|
| FH-EFGC155 | 60 / 67 in | 72 − 67 = 5 in total | Positive difference; package and approach still unverified |
| FM2560 | 60 / 72 in | 72 − 72 = 0 in | No nominal width allowance |
| FM2572 | 72 / 84 in | 72 − 84 = −12 in | Body exceeds this straight opening by 12 in |
| FM-62 fixed model | 55-in cut; page says 65-in overall | Not adopted: manual dimension labels differ | Obtain a confirmed external drawing |
Sources for this decision table (5)
- Betstco FH-EFGC155 — 60-inch working width and 67-inch overall width ↗
- Land Pride FM25 brochure — printed p. 12 width and optional-rake table ↗
- Land Pride FM25 manual 333-138M, July 1, 2024 — pp. 15, 24, 33 and 39 ↗
- WoodMaxx FM-62 — 55-inch cut, 65-inch overall width and separate shipping dimensions ↗
- WoodMaxx FM-Series Rev C, September 22, 2026 — p. 40 product-dimension labels ↗
Compare the outside dimensions of the same configuration
Betstco lists the FH-EFGC155 with a 60-inch working width and 67-inch overall width. Land Pride lists the FM2560 with the same 60-inch working width but 72 inches overall. The latter is five inches wider externally despite the equal nominal cut. The FM2572 increases the cut to 72 inches and the overall width to 84. Ask for dimensions of the quoted mower with its covers, roller, hitch hardware and selected accessories included.
Use a clear-opening measurement, not the gate’s advertised size
Consider a hypothetical opening measured at 72 inches between its closest fixed obstructions. Subtracting the FH-EFGC155’s listed 67-inch body leaves five inches total, or 2.5 inches per side only in a perfectly centered straight comparison. The FM2560’s listed body leaves zero. Neither result establishes a usable access route: hinges, latch projections, the tractor, attachment offset and approach geometry still need review. No universal clearance allowance is supplied here.
Treat a width check as an initial screen
A body wider than the clear opening fails this simple straight, aligned comparison. A narrower body merely leaves a positive numerical difference. Send the seller the opening dimensions and approach constraints before buying. Do not assume lifting, angling or removing parts will resolve a mismatch; obtain the manufacturer’s applicable transport configuration and dimensions.
Offset changes position rather than narrowing the housing
The Land Pride FM2560 documents centered and eight-inch right-offset hitch positions. Those options describe placement relative to the hitch; the listed overall width remains 72 inches. A mounted package may extend farther on one side than a centered body comparison suggests. Request left and right outside extents for the proposed hitch position. An offset label is not evidence of a folding transport mode or an eight-inch reduction in required opening width.
Resolve inconsistent dimension labels before relying on a number
WoodMaxx’s FM-62 page lists a 55-inch cut and 65-inch overall width. Its FM-Series Rev C manual, dated September 22, 2026, instead labels product dimensions as 62 inches long by 35 wide by 35 high. Those labels do not reconcile the page’s outside-width claim. Do not select 35 inches as the gate requirement or silently rename the 62-inch dimension. Request a dimensioned drawing for the supplied fixed model; shipping dimensions are separate.
Put access and storage requirements in the seller brief
Use this guide’s seller-brief link to keep the questions with one of the covered mowers. Include the measured opening, any projecting hardware, storage-bay dimensions and whether the mower will be stored attached or detached. Request a confirmed external envelope for each relevant state and the exact quoted accessories. Copy or download the brief for your inquiry.
Take these questions with you.
- What is the maximum outside envelope of the exact supplied mower, including covers, roller, hitch hardware and selected accessories?
- Which documented transport and storage configurations do these dimensions describe, and do any published labels conflict?
- What are the left and right outside extents relative to my tractor centerline in the proposed hitch position?
- With my measured opening and approach constraints, what additional dimensions must be checked before confirming access?
Keep these questions with your exact tractor and attachment details.
Use these questions in my seller briefFOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.
- Betstco FH-EFGC155 — 60-inch working width and 67-inch overall width
- Land Pride FM25 brochure — printed p. 12 width and optional-rake table
- Land Pride FM25 manual 333-138M, July 1, 2024 — pp. 15, 24, 33 and 39
- WoodMaxx FM-62 — 55-inch cut, 65-inch overall width and separate shipping dimensions
- WoodMaxx FM-Series Rev C, September 22, 2026 — p. 40 product-dimension labels
- WoodMaxx manual index: Models 2025 to current
- Currently linked EFGC standard manual, Revision 12-12-17, pp16–23
- Official EFGC series: fixed models and separate hydraulic-offset kits
- Official Betstco manual index
- Land Pride FM25 current North American family and model listing
- Official FM25 public catalog response — active models, gallery and linked documents
