THE ACREAGE EQUIPMENT FIELD GUIDE
Flail mower rear roller quotes: separate the roller, bearings and scraper
A rear roller listing may describe only the roller body, while another quote includes bearings, supports and a scraper. Those offers cannot be compared by title alone. WoodMaxx’s revision-specific roller listings and Land Pride’s separate parts entries provide a useful way to request a complete, machine-specific proposal without guessing which components need replacement.
By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test
THE DECISION IN NUMBERS
Worked package check: one name can cover different parts
Manufacturer references reviewed November 8, 2026. The 1.11-inch difference is arithmetic on published part lengths, not a fit allowance. Quote A/B is hypothetical; it neither diagnoses a repair nor prescribes replacing bearings together.
Scroll the table sideways on smaller screens.
| Reference or example | Documented scope | Decision to resolve |
|---|---|---|
| FM-62(H), Rev 5 versus Rev 6 listings | 55.07 versus 56.18 inches overall; difference 1.11 inches | Confirm revision and current order code; do not select by nominal mower width |
| Current FM-62(H)/FM-78(H) manual | Roller weldment and two UCFL205 bearing units are separate entries | Ask whether the offered weldment includes any bearing units |
| Land Pride FM2560 parts | 333-024H roller; 333-029H scraper; bearing and cap entries separate | Have the provider identify exact included entries and quantities |
| Hypothetical FM-62 quote A versus B | A: one weldment. B: same weldment plus two bearing units | B adds two component units; need and installed cost remain to be assessed |
Sources for this decision table (4)
- WoodMaxx Rev 5 roller ↗Product title: 55.07-inch overall; product code FM-62(H)-82-5.
- WoodMaxx Rev 6 roller ↗Product title: 56.18-inch overall; product code FM62(H)-1-6.
- WoodMaxx FM manual ↗Rev C, September 22, 2026: rear-roller assembly, printed p46 / PDF p47; scraper assembly, printed p56 / PDF p57.
- Land Pride FM25 parts ↗333-138P, March 24, 2026: rear roller, scraper, end weldments and bearing parts, printed p13 / PDF p15.
Ask what the word roller includes
The WoodMaxx FM parts drawing separates the roller weldment from two UCFL205 two-hole flange bearings, two grease fittings and the listed mounting hardware. A roller weldment is therefore not automatically the whole assembly shown in that drawing. Land Pride likewise lists the rear roller, scraper, end weldments and bearing components separately. Begin the inquiry by asking the provider to mark which drawing entries its quote supplies. That makes a supply-only roller price distinguishable from a larger package before either is used to compare the ownership cost of shortlisted mowers.
Use the revision as well as the model family
WoodMaxx currently lists two FM-62(H) roller weldments: Rev 5 at 55.07 inches overall and Rev 6 at 56.18 inches overall. Their product codes differ. Subtracting the published lengths gives 1.11 inches, a useful warning that the model-family label alone is insufficient. These are roller-part dimensions, not advertised cutting widths or fit tolerances. The current shared manual uses another roller identifier, FM62(H)-6-1-8. Ask WoodMaxx to map the existing mower and part to the correct current order code; a later revision label does not establish an automatic replacement.
Distinguish a bearing from its mounting package
WoodMaxx also offers an item titled roller bearing block under code FM6278(H)-22-6-5, but its brief description does not say that a bearing is included. That listing should not silently become equivalent to the UCFL205 bearing units in the current manual. Land Pride’s FM25 table distinguishes bearing entry 822-304C from cast bearing cap 822-334C and explicitly notes set screws with the latter. Ask for the contents of each quoted part and the applicable drawing. Neither a familiar bearing designation nor a matching product photograph proves interchangeability across these configurations.
Give the scraper its own line
The WoodMaxx manual places the scraper in a separate assembly table, with different references for the FM-62(H) and FM-78(H), plus its own hardware. Land Pride also assigns a distinct FM2560 scraper weldment, 333-029H, apart from rear roller weldment 333-024H. If a proposal says complete roller, ask explicitly whether it includes the applicable scraper, supports and fasteners or expects existing parts to remain. This is a package question, not an assertion that every roller purchase requires every adjacent component or that an apparent symptom identifies the failed part.
Compare equivalent proposed work
Consider a hypothetical FM-62 quote A containing one confirmed roller weldment and quote B containing that weldment plus two confirmed bearing units. The current drawing makes the difference intelligible: B includes two additional component units. It does not tell you their present prices, installation time or whether replacement is necessary. Have the provider assess the existing assembly and explain retained versus renewed components. Add the scraper and hardware only when explicitly scoped. A larger parts bundle can be more complete without being the appropriate repair for every machine.
Request a complete answer before choosing a mower
For a prospective purchase, ask how the seller identifies roller components by model and serial number, who verifies superseded codes, and whether it can quote the separate package categories. For an existing machine, include identification, the applicable drawing and condition information without diagnosing the repair yourself. Record supply scope, provider assessment, labor, freight and quoted lead time separately; the sources here establish none of today’s availability. Use this guide’s seller brief for the selected mower so the response addresses the roller, bearing and scraper questions together rather than returning another unexplained roller price.
Take these questions with you.
- Which current roller part number applies to this mower’s serial number and revision, and how does it map to any older manual or listing?
- Does the proposed roller item include bearings, bearing housings or caps, fittings and mounting hardware, or only the weldment?
- Is the scraper and its hardware included, and which existing supports or adjacent parts need provider assessment before reuse is proposed?
- What exact contents and quantities does each bearing or bearing-block item supply, and where is compatibility with this assembly documented?
- Which assessment, installation, freight and quoted lead-time items are included, and what work remains outside the proposal?
Keep these questions with your exact tractor and attachment details.
Use these questions in my seller briefFOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.
- WoodMaxx FM manualRev C, September 22, 2026: rear-roller assembly, printed p46 / PDF p47; scraper assembly, printed p56 / PDF p57.
- Land Pride FM25 parts333-138P, March 24, 2026: rear roller, scraper, end weldments and bearing parts, printed p13 / PDF p15.
- WoodMaxx Rev 5 rollerProduct title: 55.07-inch overall; product code FM-62(H)-82-5.
- WoodMaxx Rev 6 rollerProduct title: 56.18-inch overall; product code FM62(H)-1-6.
- WoodMaxx bearing blockProduct code FM6278(H)-22-6-5 and description; bearing inclusion is not stated.
- Official FM-62 page: exact hammer variant, price and equipment
- WoodMaxx manual index: Models 2025 to current
- Official FM-78 page: exact hammer variant, price and equipment
- Land Pride FM25 current North American family and model listing
- Official FM25 public catalog response — active models, gallery and linked documents
- FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
- Official FM25 brochure — printed p12 model table
