acreage.EQUIPMENT
Compare0Find equipment

THE ACREAGE EQUIPMENT FIELD GUIDE

Which tractors fit the Land Pride FM2560? Configurations near its limits

Land Pride rates the FM2560 at 33–80 hp (basis unspecified); 183 of the 294 tractor configurations on this site are not excluded by its limits. The table lists the configurations closest to its power limits and weight, where the answer is most likely to change.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Flail mowers at work
In this guide

THE DECISION IN NUMBERS

Configurations nearest the Land Pride FM2560’s limits

Within 3 hp of 33–80 hp (basis unspecified); up to 28 rows, sorted by hp. Results from the site’s screen; † recorded source conflict.

Scroll the table sideways on smaller screens.

ConfigurationPTO hpEngine hpLift at 24 in.Screen result
John Deere 3033R HST †24.3322,200 lbExcluded: under minimum
Yanmar YM232 gear †25.531.81,609 lbExcluded: under minimum
Kubota L3302 HST26.1331,435 lbNot excluded
LS MT232E HST26.231.71,433 lbExcluded: under minimum
Yanmar YT235 HST2734.21,764 lbNot excluded
Massey Ferguson 1835E HST27.634.51,598 lbNot excluded
Kubota L3302 gear28331,435 lbNot excluded
LS MT232E gear †28.531.71,433 lbExcluded: under minimum
Yanmar YM238 gear †31.938.21,609 lbNot excluded; conflict †
Case IH Farmall 40C HST cab32401,808 lbNot excluded
LS MT340HC HST cab32401,433 lbNot excluded
New Holland Boomer 40 HST32401,345 lbNot excluded
New Holland WORKMASTER 40 HST †32401,433 lbNot excluded; conflict †
Kubota L3902 gear32.137.51,435 lbNot excluded
Kubota L4270 Deluxe HST32.5422,756 lbNot excluded
Kubota LX4020 HST †32.639.81,962 lbNot excluded; conflict †
KIOTI CK4020 HST †33.339.61,631 lbNot excluded; conflict †
KIOTI DK4720SEH HST †33.444.92,716 lbNot excluded; conflict †
Massey Ferguson MF 1E.40 gear †33.539.41,598 lbNot excluded; conflict †
John Deere 4044M HST †33.6432,500 lbNot excluded; conflict †
John Deere 4044R HST †33.643.12,500 lbNot excluded; conflict †
LS MT342 HST †33.6422,469 lbNot excluded; conflict †
KIOTI NX4510 HST33.9453,177 lbNot excluded
Case IH Farmall 40C gear cab34401,808 lbNot excluded
New Holland Boomer 40 gear34401,345 lbNot excluded
New Holland WORKMASTER 40 gear †34401,433 lbNot excluded; conflict †
John Deere 3046R HST †34.1452,200 lbNot excluded; conflict †
Massey Ferguson MF 4708 power shuttle67804,850 lbExcluded: hitch category
Sources for this decision table (24)

The published range

Land Pride lists the FM2560 at 33–80 hp (basis unspecified). Land Pride does not say whether the range means engine or PTO horsepower, so this site excludes a tractor only when both figures fall outside it.

How 294 configurations screen

Of the 294 tractor configurations profiled on this site, 183 are not excluded, 73 fall under the minimum, 3 are over the maximum and 35 have a Category 2-only hitch. Not excluded is not approval: most pairings still need the maker or dealer to confirm the setup.

By brand

Configurations not excluded, by brand: Case IH 28 of 31; John Deere 25 of 39; KIOTI 19 of 37; Kubota 25 of 39; LS 12 of 32; Mahindra 10 of 17; Massey Ferguson 20 of 29; New Holland 17 of 18; TYM 18 of 37; Yanmar 9 of 15.

Closest exclusions

The configurations closest to the line are just under the minimum: John Deere 3033R HST † (32 hp), Yanmar YM232 gear † (31.8 hp), LS MT232E gear † (31.7 hp); just over the upper limit: John Deere 5100E open station (85 hp), John Deere 5100E power shuttle cab (85 hp), John Deere 5105M power shuttle (90 hp). A newer spec sheet, a different transmission or the maker’s confirmation can change these.

Weight and hitch

No product weight is retained for the FM2560, so the screen applies no lift check. Get the complete weight with the PTO shaft from the seller and compare it with the tractor’s lift 24 inches behind the hitch. It mounts on a Category 1 hitch, so Category 2-only tractors are excluded.

Take these questions with you.

  1. Which exact configuration and transmission is the tractor?
  2. Does Land Pride confirm the FM2560 at the tractor’s rating?
  3. What is the complete weight with the PTO shaft?
  4. What does the dealer list for lift 24 inches behind the hitch?

Keep these questions with your exact tractor and attachment details.

Use these questions in my seller brief

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Land Pride FM25 current North American family and model listing
  2. Official FM25 public catalog response — active models, gallery and linked documents
  3. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  4. Official FM25 brochure — printed p12 model table
  5. John Deere 3033R current U.S. product page
  6. Yanmar 2025 YM2 Series brochure (PDF created March 21, 2025)Specifications: engine gross power, PTO power, 3-point hitch Category 1, 3-point lift capacity (std.) and at 24 in., transmission, total weight
  7. Kubota 2026 Full Line Catalog
  8. LS New MT2E & MT2 Series Specifications 2026 (PDF created February 27, 2026)MT226E–MT242HE columns: Engine HP (gross), PTO HP, transmission, implement pump, Category I, hitch lift capacity (hitch end) 1,808 lb
  9. Yanmar 2022 YT2 spec sheet (PDF created June 13, 2022)Specifications: Gross Power 34.2 HP; PTO Power (@2,800 RPM) 27 HP; 3-point hitch Category 1; 3-point lift capacity (std.) 2,205 lbf; at 24" (61 cm) 1,764 lbf
  10. Massey Ferguson U.S. E Series brochure MF20B008DS, copyright 2020 — pp 2–7
  11. Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023)Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
  12. LS Tractor USA MT340HC model pageSpecifications: Engine HP (Gross) 40, PTO HP 32.0, HST 3 ranges, independent 540 PTO, Category CAT I, Hitch Lift capacity (Hitch end) 1,808, total weight 3,661 lb
  13. New Holland WORKMASTER and Boomer compact tractor brochure (PDF created March 25, 2025)PDF p3 model table (gross hp, PTO hp gear/HST, lift); PDF p27 Boomer Series specifications (Boomer 35 and 40/40 CAB columns: PTO hp, 1,808 lb at ball ends, 1,345 lb at 24 in., Category I, width, weight)
  14. New Holland WORKMASTER 25/35/40 specification workbook (series-page download)Gross horsepower, PTO horsepower gear/HST, flows, lift at ball ends and 24 in., 3-point category, width, weight (WORKMASTER 40 column)
  15. Kubota current-linked LX20 specification sheet (PDF modified April 10, 2024)Printed pp14–15: LX4020HSD and LX4020HSDC columns — PTO horsepower, engine gross horsepower, rated rpm, total pump output, Category I, lift capacity at and 24 in. behind lift point, overall width, weight
  16. KIOTI CK20 / CK20SE brochure, printed page 6
  17. KIOTI DK20 / DK20SE brochure (PDF created September 17, 2025)Printed/PDF pp6–7 specifications: Engine Gross, PTO hp, pump capacity, 3-point hitch, Maximum Lifting Capacity* (@ 24 in. aft of hitch), remote valves, width
  18. Massey Ferguson MF 1E Series spec sheet MF24SST002FCv02 (PDF modified June 18, 2025)p2 Technical Specifications: rated engine power @ 2600 rpm, PTO power @ 540 rpm (Mech / HST), transmission rows, flows, Cat 1, lift at lift points and 24 in. behind, PTO type, width, base weight
  19. John Deere 4044M current U.S. product page
  20. John Deere U.S. order book, 5 May 2026 — 4044R base machine (032ALV)Order code 032ALV: engine 43.1 hp gross SAE J1995, PTO 32.5 hp, HST 3-range
  21. LS Tractor MT3 Series brochure (LS-Tractor-Brochure_MT3_Update_v5, PDF dated July 18, 2025): p2 MT342 / MT347 / MT352 / MT357 specificationsp2 Specifications table: Engine HP (gross), PTO (HP) by column, Total Flow, Category (3pt Hitch), Hitch Lift Capacity Hitch End, Total Weight
  22. KIOTI NX Series brochure (PDF created September 18, 2025)p12 Specifications: Engine Gross hp, PTO hp by model and transmission, pump capacity, 3-point hitch category, maximum lift capacity (footnote: @ 24 in. aft of hitch), width, weight
  23. John Deere 3046R current U.S. product page
  24. AGCO MF 4700 Platform and Cab standard-features sheets (October 2025, F.O.B. port of entry), on AGCO’s dealer configuratorHorsepower (Max Engine @ 2000 RPM; Rated Engine & PTO @ 2200 RPM) per model, platform pp1 and cab p3; PTO independent 540/540E; Rear Linkage: ASAE Category II with telescopic ball ends, lift capacity at 24 in. 4,850 lb (2,200 kg)

EQUIPMENT IN THIS GUIDE

Check prices and fit for the attachments discussed.

MAKE THE NEXT CHECK

Continue with the related decision.

FIELD GUIDE

Attachment weight vs. tractor lift capacity

A product weight below a three-point lift rating is only the start of a load check. The two figures may describe different measuring points, configurations or operating conditions. Subtracting them does not produce an approved safety margin.

Read the guide →FIELD GUIDE

Choosing flail mower width for your tractor track

A mower’s model name is not a tire-coverage measurement. The useful comparison is actual cutting width against the outside rear-tire span of your tractor, plus the offset and overlap the job needs. Measure the machine you own before using a generic model recommendation.

Read the guide →FIELD GUIDE

Meeting an attachment’s minimum PTO horsepower exactly: what zero margin means

A tractor whose PTO rating equals or barely exceeds an attachment’s minimum is inside the published range, and nothing more. Several makers attach separate capacity statements well above their minimums. When the margin is zero or one horsepower, also check the source of each number and what the maker expects at that power.

Read the guide →

MAKE THE TRADEOFFS CLEAR

Read a focused comparison.

SIDE BY SIDE

Land Pride FM2560 vs WoodMaxx FM-62H: 60-inch fixed or 55-inch side shift

FM2560 or FM-62H?

Read the guide →SIDE BY SIDE

Land Pride FM2560 vs WoodMaxx FM-78 Y: 60-inch hammer or 70-inch Y-blade

FM2560 or FM-78 Y?

Read the guide →SIDE BY SIDE

Land Pride FM2560 vs WoodMaxx FM-62 Y: 60-inch hammer or 55-inch Y-blade

FM2560 or FM-62 Y?

Read the guide →
See all Land Pride FM2560 · hammer rotor comparisons →