acreage.EQUIPMENT
Compare0Find equipment

THE ACREAGE EQUIPMENT FIELD GUIDE

Which tractors fit the Land Pride FM2572? Configurations near its limits

Land Pride rates the FM2572 at 42–80 hp (basis unspecified); 153 of the 294 tractor configurations on this site are not excluded by its limits. The table lists the configurations closest to its power limits and weight, where the answer is most likely to change.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Flail mowers at work
In this guide

THE DECISION IN NUMBERS

Configurations nearest the Land Pride FM2572’s limits

Within 3 hp of 42–80 hp (basis unspecified); up to 28 rows, sorted by hp. Results from the site’s screen; † recorded source conflict.

Scroll the table sideways on smaller screens.

ConfigurationPTO hpEngine hpLift at 24 in.Screen result
Mahindra 4540 gear †31413,527 lbExcluded: under minimum
Yanmar YM342 gear3141.42,750 lbExcluded: under minimum
Kubota L4270 Deluxe HST32.5422,756 lbNot excluded
John Deere 4044M HST †33.6432,500 lbNot excluded; conflict †
John Deere 4044R HST †33.643.12,500 lbNot excluded; conflict †
LS MT342 HST †33.6422,469 lbNot excluded; conflict †
LS MT242E HST †34.842.51,433 lbNot excluded; conflict †
LS MT242E gear †35.442.51,433 lbNot excluded; conflict †
LS MT342 gear †35.7422,469 lbNot excluded; conflict †
TYM 4215 gear36412,425 lbExcluded: under minimum
TYM 4215 HST36412,425 lbExcluded: under minimum
John Deere 3043D gear36.342.21,670 lbNot excluded
Massey Ferguson MF 2E.50 gear †40.748.82,425 lbNot excluded; conflict †
John Deere 4052M Heavy Duty HST40.851.52,500 lbNot excluded
John Deere 4052M HST †41.2512,500 lbNot excluded; conflict †
John Deere 4052R HST †41.251.52,500 lbNot excluded; conflict †
Kubota MX4900 gear †41.350.32,310 lbNot excluded; conflict †
Kubota MX4900 HST †41.351.82,310 lbNot excluded; conflict †
KIOTI DK5020 gear †41.550.32,716 lbNot excluded; conflict †
LS MT352 HST †41.6522,469 lbNot excluded; conflict †
KIOTI NS5310H HST †41.850.32,493 lbNot excluded; conflict †
KIOTI NX5010 gear41.8503,177 lbNot excluded
Case IH Farmall 50A HST42.4522,310 lbNot excluded
Case IH Farmall 50C gear42.5502,756 lbNot excluded
New Holland Boomer 50 gear42.5502,116 lbNot excluded
John Deere 5060E power shuttle cab42.9603,192 lbNot excluded
KIOTI NX5510 HST †43.1553,177 lbNot excluded; conflict †
Massey Ferguson MF 4708 power shuttle67804,850 lbNot excluded
Sources for this decision table (25)

The published range

Land Pride lists the FM2572 at 42–80 hp (basis unspecified). Land Pride does not say whether the range means engine or PTO horsepower, so this site excludes a tractor only when both figures fall outside it.

How 294 configurations screen

Of the 294 tractor configurations profiled on this site, 153 are not excluded, 135 fall under the minimum and 6 are over the maximum. Not excluded is not approval: most pairings still need the maker or dealer to confirm the setup.

By brand

Configurations not excluded, by brand: Case IH 20 of 31; John Deere 21 of 39; KIOTI 22 of 37; Kubota 18 of 39; LS 21 of 32; Mahindra 5 of 17; Massey Ferguson 17 of 29; New Holland 6 of 18; TYM 18 of 37; Yanmar 5 of 15.

Closest exclusions

The configurations closest to the line are just under the minimum: Yanmar YM342 gear (41.4 hp), Mahindra 4540 gear † (41 hp), TYM 4215 gear (41 hp); just over the upper limit: John Deere 5100E open station (85 hp), John Deere 5100E power shuttle cab (85 hp), LS MT7101 power shuttle cab (85.5 hp). A newer spec sheet, a different transmission or the maker’s confirmation can change these.

Weight and hitch

No product weight is retained for the FM2572, so the screen applies no lift check. Get the complete weight with the PTO shaft from the seller and compare it with the tractor’s lift 24 inches behind the hitch. It mounts on a Category 1 and 2 hitch.

Take these questions with you.

  1. Which exact configuration and transmission is the tractor?
  2. Does Land Pride confirm the FM2572 at the tractor’s rating?
  3. What is the complete weight with the PTO shaft?
  4. What does the dealer list for lift 24 inches behind the hitch?

Keep these questions with your exact tractor and attachment details.

Use these questions in my seller brief

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Land Pride FM25 current North American family and model listing
  2. Official FM25 public catalog response — active models, gallery and linked documents
  3. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  4. Official FM25 brochure — printed p12 model table
  5. Mahindra USA 4500 Series page: 4540 4WD / 4550 4WD specification tableSpecifications table: Engine, Drive Train, PTO, Hydraulics, Dimensions & Weight
  6. Yanmar YM3 brochure (PDF created June 29, 2021)Printed p16 specifications: engine (hp), PTO (hp), hitch category (SAE) Category 1 & 2, 3-point lift capacity 24 in. behind, ROPS weight, transmission
  7. Kubota 2026 Full Line Catalog — Grand L70, printed p21 / PDF p23Grand L70 table: engine model, Engine Gross Power*, PTO HP Power / RPM, Rated Revolution, Weight – ROPS, Pump Capacity, Maximum Lift Force at and 24 in. behind lift points, Rear PTO – Engine Speed, 3-Point Hitch; * SAE J1995
  8. John Deere 4044M current U.S. product page
  9. John Deere U.S. order book, 5 May 2026 — 4044R base machine (032ALV)Order code 032ALV: engine 43.1 hp gross SAE J1995, PTO 32.5 hp, HST 3-range
  10. LS Tractor MT3 Series brochure (LS-Tractor-Brochure_MT3_Update_v5, PDF dated July 18, 2025): p2 MT342 / MT347 / MT352 / MT357 specificationsp2 Specifications table: Engine HP (gross), PTO (HP) by column, Total Flow, Category (3pt Hitch), Hitch Lift Capacity Hitch End, Total Weight
  11. LS New MT2E & MT2 Series Specifications 2026 (PDF created February 27, 2026)MT226E–MT242HE columns: Engine HP (gross), PTO HP, transmission, implement pump, Category I, hitch lift capacity (hitch end) 1,808 lb
  12. TYM 4215R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
  13. John Deere 3 Series compact utility tractor brochure 3928957 (PDF created July 24, 2025)Specifications: 3025D/3035D/3043D horsepower (SAE J1995), PTO HP geared transmission, lift capacity 24 in. behind center link 1,670 lb, Category 1, gear 8F-8R, transmission-driven PTO with overrunning clutch, weight
  14. Massey Ferguson MF 2E Series spec sheet MF25SST002FCv03 (©2025, PDF modified October 28, 2025)p1 feature list (Cat 1 rear hitch); p2 Technical Specifications: rated engine power, PTO power @ 540 rpm (Mech / HST), transmission rows, flows, Cat 1 & 2, lift capacities, PTO type, width, base weight
  15. John Deere 4 Series compact utility tractor brochure 3928970 (linked from the current Heavy Duty pages)Specifications, 4052M Heavy Duty and 4066M Heavy Duty columns: HP, PTO HP hydro transmission, 3F/3R hydrostatic, independent 540 PTO, rear hitch Category 1/2, lift capacity 24 in. behind link arms 2,500 lb and at link ends 3,130 lb, OOS 4,255 lb
  16. John Deere 4052M current U.S. product page
  17. Kubota current-linked MX specification sheet (PDF modified May 14, 2025)Printed p16: MX4900 gear-drive and HST columns — engine gross SAE J1995 and net SAE J1349 power, PTO power, rated speed, pump capacity, Category I & II, lift at 24 in.; printed p17: overall width, weight with ROPS / cab
  18. KIOTI DK5020 current U.S. product page
  19. KIOTI NS Series brochure (PDF created September 12, 2025)PDF p12 Specifications: Engine Gross and PTO hp by model, pump capacity, 3-point hitch category, Maximum Lifting Capacity* (footnote: @ 24 in. aft of hitch), width, weight
  20. KIOTI NX Series brochure (PDF created September 18, 2025)p12 Specifications: Engine Gross hp, PTO hp by model and transmission, pump capacity, 3-point hitch category, maximum lift capacity (footnote: @ 24 in. aft of hitch), width, weight
  21. Case IH Farmall Compact A specification sheet, models 35A–55A (PDF created August 24, 2026)Specifications: Engine HP, PTO HP (Mechanical Trans. / Hydrostatic Trans.), 3pt Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, implement and total flow, weight
  22. Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023)Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
  23. New Holland WORKMASTER and Boomer compact tractor brochure (PDF created March 25, 2025)PDF p3 model table (gross hp, PTO hp gear/HST, lift); PDF p15 Boomer text (Category I three-point hitch); PDF p27 Boomer Series specifications (PTO hp, lift at ball ends and 24 in., category, width, weight)
  24. John Deere price pages, Tractors 5050E/5060E/5067E/5075E (5 November 2025): 5060E Cab Utility Tractor (06C1LV)06C1LV base equipment: 60 97/68/EC engine horsepower; 42.9 PTO horsepower @ 2,100 rpm; 3-Point (Category II) Hitch with Sway Bars - Convertible to Category I
  25. AGCO MF 4700 Platform and Cab standard-features sheets (October 2025, F.O.B. port of entry), on AGCO’s dealer configuratorHorsepower (Max Engine @ 2000 RPM; Rated Engine & PTO @ 2200 RPM) per model, platform pp1 and cab p3; PTO independent 540/540E; Rear Linkage: ASAE Category II with telescopic ball ends, lift capacity at 24 in. 4,850 lb (2,200 kg)

EQUIPMENT IN THIS GUIDE

Check prices and fit for the attachments discussed.

MAKE THE NEXT CHECK

Continue with the related decision.

FIELD GUIDE

Attachment weight vs. tractor lift capacity

A product weight below a three-point lift rating is only the start of a load check. The two figures may describe different measuring points, configurations or operating conditions. Subtracting them does not produce an approved safety margin.

Read the guide →FIELD GUIDE

Choosing flail mower width for your tractor track

A mower’s model name is not a tire-coverage measurement. The useful comparison is actual cutting width against the outside rear-tire span of your tractor, plus the offset and overlap the job needs. Measure the machine you own before using a generic model recommendation.

Read the guide →FIELD GUIDE

Meeting an attachment’s minimum PTO horsepower exactly: what zero margin means

A tractor whose PTO rating equals or barely exceeds an attachment’s minimum is inside the published range, and nothing more. Several makers attach separate capacity statements well above their minimums. When the margin is zero or one horsepower, also check the source of each number and what the maker expects at that power.

Read the guide →

MAKE THE TRADEOFFS CLEAR

Read a focused comparison.

SIDE BY SIDE

Farmer-Helper FH-EFGC125 vs Land Pride FM2572: 48-inch or 72-inch hammer flail

FH-EFGC125 or FM2572?

Read the guide →SIDE BY SIDE

Land Pride FM2572 hammer vs TMG TFMS50: a 72-inch fixed cut or 49 inches with side shift

With 40–43 PTO hp and 50 engine hp: FM2572 or TFMS50?

Read the guide →SIDE BY SIDE

Farmer-Helper FH-EFGC155 hammer vs Land Pride FM2572 hammer: a PTO range or an unstated basis on a 70-inch tractor

With about 40 PTO and 49 engine hp, should I buy FH-EFGC155 or FM2572?

Read the guide →
See all Land Pride FM2572 · hammer rotor comparisons →