THE ACREAGE EQUIPMENT FIELD GUIDE
Which tractors fit the Land Pride FM2584? Configurations near its limits
Land Pride rates the FM2584 at 49–80 hp (basis unspecified); 105 of the 294 tractor configurations on this site are not excluded by its limits. The table lists the configurations closest to its power limits and weight, where the answer is most likely to change.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

THE DECISION IN NUMBERS
Configurations nearest the Land Pride FM2584’s limits
Within 3 hp of 49–80 hp (basis unspecified); up to 28 rows, sorted by hp. Results from the site’s screen; † recorded source conflict.
Scroll the table sideways on smaller screens.
| Configuration | PTO hp | Engine hp | Lift at 24 in. | Screen result |
|---|---|---|---|---|
| TYM T474 gear † | 35.9 | 48.3 | 1,764 lb | Excluded: under minimum |
| Massey Ferguson MF 2M.50 HST † | 36.2 | 48.8 | 3,086 lb | Excluded: under minimum |
| John Deere 5050E open station | 37 | 50 | 3,192 lb | Not excluded |
| TYM T494 gear † | 37.2 | 48.3 | 3,050.6 lb | Excluded: under minimum |
| Mahindra 4550 gear † | 38 | 48 | 3,527 lb | Excluded: under minimum |
| Massey Ferguson MF 2M.50 power shuttle † | 38.1 | 48.8 | 3,086 lb | Excluded: under minimum |
| TYM 4820 gear | 38.4 | 48 | 2,425 lb | Excluded: under minimum |
| TYM 4820 HST | 38.4 | 48 | 2,425 lb | Excluded: under minimum |
| Massey Ferguson MF 2E.50 HST † | 38.5 | 48.8 | 2,425 lb | Excluded: under minimum |
| KIOTI NX5010 HST | 38.9 | 50 | 3,177 lb | Not excluded |
| Kubota L4802 HST | 39 | 48.4 | 2,320 lb | Excluded: under minimum |
| Kubota L5070 Premium HST | 39.8 | 50 | 2,756 lb | Not excluded |
| Case IH Farmall 50C HST | 40 | 50 | 2,756 lb | Not excluded |
| New Holland Boomer 50 HST | 40 | 50 | 2,116 lb | Not excluded |
| TYM 4815 gear | 40 | 48 | 2,425 lb | Excluded: under minimum |
| TYM 4815 HST | 40 | 48 | 2,425 lb | Excluded: under minimum |
| Kubota L4802 gear | 40.5 | 48.4 | 2,320 lb | Excluded: under minimum |
| Massey Ferguson MF 2E.50 gear † | 40.7 | 48.8 | 2,425 lb | Excluded: under minimum |
| KIOTI NX5010 gear | 41.8 | 50 | 3,177 lb | Not excluded |
| Case IH Farmall 50C gear | 42.5 | 50 | 2,756 lb | Not excluded |
| New Holland Boomer 50 gear | 42.5 | 50 | 2,116 lb | Not excluded |
| Massey Ferguson MF 2E.60 gear † | 48 | 57.3 | 2,425 lb | Not excluded; conflict † |
| KIOTI NS6010 gear † | 48.3 | 57.7 | 2,493 lb | Not excluded; conflict † |
| KIOTI NX6010 HST | 48.3 | 57.7 | 3,177 lb | Not excluded |
| LS MT357 gear † | 48.4 | 57 | 2,469 lb | Not excluded; conflict † |
| John Deere 5067E power shuttle cab | 49 | 67.6 | 3,192 lb | Not excluded |
| Case IH Farmall 55A gear | 49.3 | 57 | 2,310 lb | Not excluded |
| Massey Ferguson MF 4708 power shuttle | 67 | 80 | 4,850 lb | Not excluded |
Sources for this decision table (20)
- Land Pride FM25 current North American family and model listing ↗
- Official FM25 public catalog response — active models, gallery and linked documents ↗
- FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39 ↗
- Official FM25 brochure — printed p12 model table ↗
- TYM Catalog 2026 – Series 3 (PDF modified January 13, 2026) ↗p20 T474 key specifications; p28 Specification Guide, T474 column: engine and PTO power, transmission, hydraulics, Category, hitch lift and lift at 24 in. behind link ends, weight
- Massey Ferguson MF 2M Series spec sheet (PDF created November 3, 2025) ↗p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight
- John Deere price pages, Tractors 5050E/5060E/5067E/5075E (5 November 2025): 5050E Open Operator Station Utility Tractor (05C0LV) ↗05C0LV base equipment: 50 97/68/EC engine horsepower; 37.0 PTO horsepower @ 2,100 rpm; 3-Point (Category II) Hitch with Sway Bars - Convertible to Category I
- TYM Catalog 2025 – Series 4 (PDF modified August 14, 2025) ↗p11 T494 and p13 T574 key specifications; p24 Specification Guide, T494 and T574 columns
- Mahindra USA 4500 Series page: 4540 4WD / 4550 4WD specification table ↗Specifications table: Engine, Drive Train, PTO, Hydraulics, Dimensions & Weight
- TYM 4820R North America product brochure (PDF created August 2025) ↗PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
- Massey Ferguson MF 2E Series spec sheet MF25SST002FCv03 (©2025, PDF modified October 28, 2025) ↗p1 feature list (Cat 1 rear hitch); p2 Technical Specifications: rated engine power, PTO power @ 540 rpm (Mech / HST), transmission rows, flows, Cat 1 & 2, lift capacities, PTO type, width, base weight
- KIOTI NX Series brochure (PDF created September 18, 2025) ↗p12 Specifications: Engine Gross hp, PTO hp by model and transmission, pump capacity, 3-point hitch category, maximum lift capacity (footnote: @ 24 in. aft of hitch), width, weight
- Kubota 2026 Full Line Catalog — L02 specifications, printed p12 (PDF p14) ↗
- Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023) ↗Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
- New Holland WORKMASTER and Boomer compact tractor brochure (PDF created March 25, 2025) ↗PDF p3 model table (gross hp, PTO hp gear/HST, lift); PDF p15 Boomer text (Category I three-point hitch); PDF p27 Boomer Series specifications (PTO hp, lift at ball ends and 24 in., category, width, weight)
- TYM 4815R North America product brochure (PDF created August 2025) ↗PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
- KIOTI NS Series brochure (PDF created September 12, 2025) ↗PDF p12 Specifications: Engine Gross and PTO hp by model, pump capacity, 3-point hitch category, Maximum Lifting Capacity* (footnote: @ 24 in. aft of hitch), width, weight
- LS Tractor MT3 Series brochure (LS-Tractor-Brochure_MT3_Update_v5, PDF dated July 18, 2025): p2 MT342 / MT347 / MT352 / MT357 specifications ↗p2 Specifications table: Engine HP (gross), PTO (HP) by column, Total Flow, Category (3pt Hitch), Hitch Lift Capacity Hitch End, Total Weight
- Case IH Farmall Compact A specification sheet, models 35A–55A (PDF created August 24, 2026) ↗Specifications: Engine HP, PTO HP (Mechanical Trans. / Hydrostatic Trans.), 3pt Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, implement and total flow, weight
- AGCO MF 4700 Platform and Cab standard-features sheets (October 2025, F.O.B. port of entry), on AGCO’s dealer configurator ↗Horsepower (Max Engine @ 2000 RPM; Rated Engine & PTO @ 2200 RPM) per model, platform pp1 and cab p3; PTO independent 540/540E; Rear Linkage: ASAE Category II with telescopic ball ends, lift capacity at 24 in. 4,850 lb (2,200 kg)
The published range
Land Pride lists the FM2584 at 49–80 hp (basis unspecified). Land Pride does not say whether the range means engine or PTO horsepower, so this site excludes a tractor only when both figures fall outside it.
How 294 configurations screen
Of the 294 tractor configurations profiled on this site, 105 are not excluded, 179 fall under the minimum, 6 are over the maximum and 4 have a manual width limit narrower than its cut. Not excluded is not approval: most pairings still need the maker or dealer to confirm the setup.
By brand
Configurations not excluded, by brand: Case IH 16 of 31; John Deere 17 of 39; KIOTI 16 of 37; Kubota 10 of 39; LS 13 of 32; Mahindra 3 of 17; Massey Ferguson 12 of 29; New Holland 4 of 18; TYM 11 of 37; Yanmar 3 of 15.
Closest exclusions
The configurations closest to the line are just under the minimum: Massey Ferguson MF 2E.50 gear † (48.8 hp), Massey Ferguson MF 2E.50 HST † (48.8 hp), Massey Ferguson MF 2M.50 power shuttle † (48.8 hp); just over the upper limit: John Deere 5100E open station (85 hp), John Deere 5100E power shuttle cab (85 hp), LS MT7101 power shuttle cab (85.5 hp). A newer spec sheet, a different transmission or the maker’s confirmation can change these.
Weight and hitch
No product weight is retained for the FM2584, so the screen applies no lift check. Get the complete weight with the PTO shaft from the seller and compare it with the tractor’s lift 24 inches behind the hitch. It mounts on a Category 1 and 2 hitch.
Take these questions with you.
- Which exact configuration and transmission is the tractor?
- Does Land Pride confirm the FM2584 at the tractor’s rating?
- What is the complete weight with the PTO shaft?
- What does the dealer list for lift 24 inches behind the hitch?
Keep these questions with your exact tractor and attachment details.
Use these questions in my seller briefFOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.
- Land Pride FM25 current North American family and model listing
- Official FM25 public catalog response — active models, gallery and linked documents
- FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
- Official FM25 brochure — printed p12 model table
- TYM Catalog 2026 – Series 3 (PDF modified January 13, 2026)p20 T474 key specifications; p28 Specification Guide, T474 column: engine and PTO power, transmission, hydraulics, Category, hitch lift and lift at 24 in. behind link ends, weight
- Massey Ferguson MF 2M Series spec sheet (PDF created November 3, 2025)p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight
- John Deere price pages, Tractors 5050E/5060E/5067E/5075E (5 November 2025): 5050E Open Operator Station Utility Tractor (05C0LV)05C0LV base equipment: 50 97/68/EC engine horsepower; 37.0 PTO horsepower @ 2,100 rpm; 3-Point (Category II) Hitch with Sway Bars - Convertible to Category I
- TYM Catalog 2025 – Series 4 (PDF modified August 14, 2025)p11 T494 and p13 T574 key specifications; p24 Specification Guide, T494 and T574 columns
- Mahindra USA 4500 Series page: 4540 4WD / 4550 4WD specification tableSpecifications table: Engine, Drive Train, PTO, Hydraulics, Dimensions & Weight
- TYM 4820R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
- Massey Ferguson MF 2E Series spec sheet MF25SST002FCv03 (©2025, PDF modified October 28, 2025)p1 feature list (Cat 1 rear hitch); p2 Technical Specifications: rated engine power, PTO power @ 540 rpm (Mech / HST), transmission rows, flows, Cat 1 & 2, lift capacities, PTO type, width, base weight
- KIOTI NX Series brochure (PDF created September 18, 2025)p12 Specifications: Engine Gross hp, PTO hp by model and transmission, pump capacity, 3-point hitch category, maximum lift capacity (footnote: @ 24 in. aft of hitch), width, weight
- Kubota 2026 Full Line Catalog — L02 specifications, printed p12 (PDF p14)
- Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023)Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
- New Holland WORKMASTER and Boomer compact tractor brochure (PDF created March 25, 2025)PDF p3 model table (gross hp, PTO hp gear/HST, lift); PDF p15 Boomer text (Category I three-point hitch); PDF p27 Boomer Series specifications (PTO hp, lift at ball ends and 24 in., category, width, weight)
- TYM 4815R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
- KIOTI NS Series brochure (PDF created September 12, 2025)PDF p12 Specifications: Engine Gross and PTO hp by model, pump capacity, 3-point hitch category, Maximum Lifting Capacity* (footnote: @ 24 in. aft of hitch), width, weight
- LS Tractor MT3 Series brochure (LS-Tractor-Brochure_MT3_Update_v5, PDF dated July 18, 2025): p2 MT342 / MT347 / MT352 / MT357 specificationsp2 Specifications table: Engine HP (gross), PTO (HP) by column, Total Flow, Category (3pt Hitch), Hitch Lift Capacity Hitch End, Total Weight
- Case IH Farmall Compact A specification sheet, models 35A–55A (PDF created August 24, 2026)Specifications: Engine HP, PTO HP (Mechanical Trans. / Hydrostatic Trans.), 3pt Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, implement and total flow, weight
- AGCO MF 4700 Platform and Cab standard-features sheets (October 2025, F.O.B. port of entry), on AGCO’s dealer configuratorHorsepower (Max Engine @ 2000 RPM; Rated Engine & PTO @ 2200 RPM) per model, platform pp1 and cab p3; PTO independent 540/540E; Rear Linkage: ASAE Category II with telescopic ball ends, lift capacity at 24 in. 4,850 lb (2,200 kg)
