THE ACREAGE EQUIPMENT FIELD GUIDE
Which tractors fit the Wallenstein BX36S? Configurations near its limits
Wallenstein rates the BX36S at 12–30 engine hp; 67 of the 294 tractor configurations on this site are not excluded by its limits. The table lists the configurations closest to its power limits and weight, where the answer is most likely to change.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test
THE DECISION IN NUMBERS
Configurations nearest the Wallenstein BX36S’s limits
Within 3 hp of 12–30 engine hp; up to 28 rows, sorted by engine hp. Results from the site’s screen; † recorded source conflict.
Scroll the table sideways on smaller screens.
| Configuration | PTO hp | Engine hp | Lift at 24 in. | Screen result |
|---|---|---|---|---|
| TYM 3015 gear | 25 | 30 | 2,425 lb | Not excluded |
| TYM 3015 HST | 25 | 30 | 2,425 lb | Not excluded |
| John Deere 2032R HST † | 25 | 30.8 | 1,356 lb | Excluded: over maximum |
| John Deere 3032E HST † | 25 | 31 | 1,356 lb | Excluded: over maximum |
| LS MT232E gear † | 28.5 | 31.7 | 1,433 lb | Excluded: over maximum |
| LS MT232E HST | 26.2 | 31.7 | 1,433 lb | Excluded: over maximum |
| Yanmar YM232 gear † | 25.5 | 31.8 | 1,609 lb | Excluded: over maximum |
| John Deere 3033R HST † | 24.3 | 32 | 2,200 lb | Excluded: over maximum |
| Kubota L3302 HST | 26.1 | 33 | 1,435 lb | Excluded: over maximum |
| Kubota L3302 gear | 28 | 33 | 1,435 lb | Excluded: over maximum |
Sources for this decision table (12)
- Wallenstein official U.S. BX36S page — explicit engine band, capacity, RPM label, reference weight and accessories ↗
- Wallenstein BX36S support — currently linked operator, setup and shaft documents ↗
- BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,28,30,40 ↗
- PTO shaft installation Z97844_En, Rev Aug-2024 — p6 sizing with a quick hitch attached ↗
- BX-S setup instructions Z97085_SI, Rev Feb-2019 — assembly and shipment handling ↗
- TYM 3015R North America product brochure (PDF created August 2025) ↗PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
- John Deere U.S. specification book, 5 May 2026 — 2032R 153ALV and 2025R 1511LV entries ↗
- John Deere current U.S. 3032E product page and linked documents ↗
- LS New MT2E & MT2 Series Specifications 2026 (PDF created February 27, 2026) ↗MT226E–MT242HE columns: Engine HP (gross), PTO HP, transmission, implement pump, Category I, hitch lift capacity (hitch end) 1,808 lb
- Yanmar 2025 YM2 Series brochure (PDF created March 21, 2025) ↗Specifications: engine gross power, PTO power, 3-point hitch Category 1, 3-point lift capacity (std.) and at 24 in., transmission, total weight
- John Deere 3033R current U.S. product page ↗
- Kubota 2026 Full Line Catalog ↗
The published range
Wallenstein lists the BX36S at 12–30 engine hp. Wallenstein gives the range in engine horsepower, so this site compares each tractor’s engine rating, not its PTO rating.
How 294 configurations screen
Of the 294 tractor configurations profiled on this site, 67 are not excluded, 192 are over the maximum and 35 have a Category 2-only hitch. Not excluded is not approval: most pairings still need the maker or dealer to confirm the setup.
By brand
Configurations not excluded, by brand: Case IH 3 of 31; John Deere 8 of 39; KIOTI 10 of 37; Kubota 12 of 39; LS 6 of 32; Mahindra 7 of 17; Massey Ferguson 4 of 29; New Holland 1 of 18; TYM 12 of 37; Yanmar 4 of 15.
Closest exclusions
The configurations closest to the line are just over the maximum: John Deere 2032R HST † (30.8 engine hp), John Deere 3032E HST † (31 engine hp), LS MT232E gear † (31.7 engine hp). A newer spec sheet, a different transmission or the maker’s confirmation can change these.
Weight and hitch
No product weight is retained for the BX36S, so the screen applies no lift check. Get the complete weight with the PTO shaft from the seller and compare it with the tractor’s lift 24 inches behind the hitch. It mounts on a Category 1 hitch, so Category 2-only tractors are excluded.
Take these questions with you.
- Which exact configuration and transmission is the tractor?
- Does Wallenstein confirm the BX36S at the tractor’s rating?
- What is the complete weight with the PTO shaft?
- What does the dealer list for lift 24 inches behind the hitch?
Keep these questions with your exact tractor and attachment details.
Use these questions in my seller briefFOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.
- Wallenstein official U.S. BX36S page — explicit engine band, capacity, RPM label, reference weight and accessories
- Wallenstein BX36S support — currently linked operator, setup and shaft documents
- BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,28,30,40
- PTO shaft installation Z97844_En, Rev Aug-2024 — p6 sizing with a quick hitch attached
- BX-S setup instructions Z97085_SI, Rev Feb-2019 — assembly and shipment handling
- TYM 3015R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
- John Deere U.S. specification book, 5 May 2026 — 2032R 153ALV and 2025R 1511LV entries
- John Deere current U.S. 3032E product page and linked documents
- LS New MT2E & MT2 Series Specifications 2026 (PDF created February 27, 2026)MT226E–MT242HE columns: Engine HP (gross), PTO HP, transmission, implement pump, Category I, hitch lift capacity (hitch end) 1,808 lb
- Yanmar 2025 YM2 Series brochure (PDF created March 21, 2025)Specifications: engine gross power, PTO power, 3-point hitch Category 1, 3-point lift capacity (std.) and at 24 in., transmission, total weight
- John Deere 3033R current U.S. product page
- Kubota 2026 Full Line Catalog
