acreage.EQUIPMENT
Compare0Find equipment

THE ACREAGE EQUIPMENT FIELD GUIDE

Which tractors fit the Woodland Mills WC46? Configurations near its limits

Woodland Mills rates the WC46 at 15–30 PTO hp; 100 of the 294 tractor configurations on this site are not excluded by its limits. The table lists the configurations closest to its power limits and weight, where the answer is most likely to change.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

PTO wood chippers at work
In this guide

THE DECISION IN NUMBERS

Configurations nearest the Woodland Mills WC46’s limits

Within 3 hp of 15–30 PTO hp or near its weight; up to 28 rows, sorted by PTO hp. Results from the site’s screen; † recorded source conflict.

Scroll the table sideways on smaller screens.

ConfigurationPTO hpEngine hpLift at 24 in.Screen result
John Deere 1023E HST †14.521758 lbExcluded: under minimum
LS MT122 HST1521.5728 lbNot excluded
TYM T224 HST15.121.5679 lbNot excluded
Yanmar SA223 HST15.621.5660 lbNot excluded
KIOTI CS2220H HST †16.321700 lbNot excluded; conflict †
KIOTI CS2210H HST †16.321700 lbNot excluded; conflict †
KIOTI CS2230H HST16.721700 lbNot excluded
Case IH Farmall 25SC HST17.224.7728 lbNot excluded
LS MT125 HST †17.224.7728 lbNot excluded; conflict †
New Holland WORKMASTER 25S HST †17.224.7728 lbNot excluded; conflict †
Kubota BX2380 HST17.721.6680 lbNot excluded
Massey Ferguson GC1723E HST †18.322.5661 lbNot excluded; conflict †
KIOTI CS2520H HST †18.524.5700 lbNot excluded; conflict †
KIOTI CS2510H HST †18.524.5700 lbNot excluded; conflict †
Case IH Farmall 35C gear29.7351,808 lbNot excluded
New Holland Boomer 35 gear29.7351,345 lbNot excluded
New Holland WORKMASTER 35 gear †29.7351,433 lbNot excluded; conflict †
Mahindra 1640 gear †29.938.71,720 lbNot excluded; conflict †
John Deere 2038R HST †3036.81,356 lbNot excluded; conflict †
John Deere 3038E HST †30371,356 lbNot excluded; conflict †
Massey Ferguson MF 1M.40 power shuttle3039.42,535 lbNot excluded
TYM 3515 gear30352,425 lbNot excluded
TYM 3515 HST30352,425 lbNot excluded
Case IH Farmall 35A HST30.1351,596 lbExcluded: over maximum
New Holland WORKMASTER 35C HST30.1351,596 lbExcluded: over maximum
TYM T394 gear †30.237.41,558 lbExcluded: over maximum
Kubota L3902 HST30.337.51,435 lbExcluded: over maximum
John Deere 3035D gear30.434.71,670 lbExcluded: over maximum
Sources for this decision table (22)

The published range

Woodland Mills lists the WC46 at 15–30 PTO hp. Woodland Mills gives the range in PTO horsepower, so this site compares each tractor’s published PTO rating.

How 294 configurations screen

Of the 294 tractor configurations profiled on this site, 100 are not excluded, 3 fall under the minimum, 156 are over the maximum and 35 have a Category 2-only hitch. Not excluded is not approval: most pairings still need the maker or dealer to confirm the setup.

By brand

Configurations not excluded, by brand: Case IH 5 of 31; John Deere 12 of 39; KIOTI 12 of 37; Kubota 15 of 39; LS 9 of 32; Mahindra 10 of 17; Massey Ferguson 9 of 29; New Holland 4 of 18; TYM 16 of 37; Yanmar 8 of 15.

Closest exclusions

The configurations closest to the line are just under the minimum: John Deere 1023E HST † (14.5 PTO hp), Mahindra 1120 HST (13.9 PTO hp), Kubota BX1880 HST (13.7 PTO hp); just over the maximum: Case IH Farmall 35A HST (30.1 PTO hp), New Holland WORKMASTER 35C HST (30.1 PTO hp), TYM T394 gear † (30.2 PTO hp). A newer spec sheet, a different transmission or the maker’s confirmation can change these.

Weight and hitch

This site retains a 587-lb weight for the WC46. No configuration that clears the power range lists less lift 24 inches behind the hitch than that; tractors with no published 24-inch lift are held for review. It mounts on a Category 1 hitch, so Category 2-only tractors are excluded.

Take these questions with you.

  1. Which exact configuration and transmission is the tractor?
  2. Does Woodland Mills confirm the WC46 at the tractor’s rating?
  3. What is the complete weight with the PTO shaft?
  4. What does the dealer list for lift 24 inches behind the hitch?

Keep these questions with your exact tractor and attachment details.

Use these questions in my seller brief

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  2. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  3. John Deere U.S. order book, 5 May 2026 — 1023E Sub-Compact Utility Tractor (0253LV)0253LV “1023E Sub-Compact Utility Tractor (15 PTO hp)”: Engine HP 22.4 (16.5 kW) PS, PTO HP 14.5 (11.4 kW), 3,200 rpm, 2-speed hydrostatic
  4. LS MT1 Series brochure (PDF created November 6, 2025)Specifications: Engine HP (gross) 21.5, PTO (HP) 15.0, CAT I, hitch lift capacity (hitch end) 992 lb (at 610 mm: 728), total weight 1,433 lb
  5. TYM T224 North America product brochure (PDF created August 2025)PDF p5 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
  6. Yanmar SA Series brochure (PDF created November 14, 2022)Printed p12: PTO power HP, gross power HP*, engine rpm, transmission, 3-point hitch Limited category 1, 3-point lift capacity 24 in behind lift point, overall width, weight
  7. KIOTI CS10/CS20/CS30 brochure (PDF created August 27, 2026)PDF p24 CS10/CS20 specifications: Engine Gross, PTO @ rated PTO rpm, rated revolution 3,200 rpm, Category l, Maximum Lift Capacity* 700 lb (* @ 24 in. aft of hitch), weight
  8. Case IH Farmall Subcompact 25SC specification sheet (PDF created April 1, 2024)Specifications: Engine HP 24.7, PTO HP 17.2, 2-Range Hydrostatic, Cat. 1, Standard Lift Capacity @ 24 in. Behind Pin 728 lb, weight 1,444 lb
  9. Current LS Tractor USA MT125 page — exact HST specifications and options
  10. New Holland U.S./Canada compact brochure NH45145459, April 2025 — p 26 specifications; p 28 publication scope
  11. Kubota 2026 Full Line Catalog — printed pp2 and 6
  12. Massey Ferguson GC1700 U.S. brochure, May 2023 — printed/PDF p 10
  13. Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023)Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
  14. Mahindra USA 1600 Series brochure, Rev 09022025: PDF p5 tractor specifications (engine, PTO type and PTO hp by transmission, 3-point lift at 24 in., hydraulics, weight)PDF p5, Tractor Specifications: 1640 Shuttle / HST / HST Cab columns
  15. John Deere current U.S. 2038R page — source identity and brochure link
  16. John Deere current U.S. 3038E page — specifications and linked brochure
  17. Massey Ferguson MF 1M Series spec sheet (PDF created November 6, 2025)p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight
  18. TYM 3515R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
  19. Case IH Farmall Compact A specification sheet, models 35A–55A (PDF created August 24, 2026)Specifications: Engine HP, PTO HP (Mechanical Trans. / Hydrostatic Trans.), 3pt Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, implement and total flow, weight
  20. New Holland WORKMASTER 35C & 40C Compact Series brochure (PDF created February 26, 2026), linked from the current U.S. pagep13 Specifications: gross engine hp; PTO hp gear / HST; 3-Point Hitch Category 1; lift at ball ends and 24 in. behind ball ends; rear PTO type; hydraulic flow; width and weight. p2 overview table
  21. TYM T394 North America brochure, Aug 2025 — printed/PDF p 4
  22. John Deere 3 Series compact utility tractor brochure 3928957 (PDF created July 24, 2025)Specifications: 3025D/3035D/3043D horsepower (SAE J1995), PTO HP geared transmission, lift capacity 24 in. behind center link 1,670 lb, Category 1, gear 8F-8R, transmission-driven PTO with overrunning clutch, weight

EQUIPMENT IN THIS GUIDE

Check prices and fit for the attachments discussed.

MAKE THE NEXT CHECK

Continue with the related decision.

FIELD GUIDE

Attachment weight vs. tractor lift capacity

A product weight below a three-point lift rating is only the start of a load check. The two figures may describe different measuring points, configurations or operating conditions. Subtracting them does not produce an approved safety margin.

Read the guide →FIELD GUIDE

Meeting an attachment’s minimum PTO horsepower exactly: what zero margin means

A tractor whose PTO rating equals or barely exceeds an attachment’s minimum is inside the published range, and nothing more. Several makers attach separate capacity statements well above their minimums. When the margin is zero or one horsepower, also check the source of each number and what the maker expects at that power.

Read the guide →FIELD GUIDE

When the tractor is too strong: attachment maximum horsepower

Most horsepower checks look at the minimum. Many small chippers and flail mowers also publish a maximum, and a larger tractor can be outside the range for a lighter attachment. Treat the maximum as a published limit with its own horsepower basis. Ask the maker before assuming a light attachment is the safe choice.

Read the guide →

MAKE THE TRADEOFFS CLEAR

Read a focused comparison.

SIDE BY SIDE

Wallenstein BX52S vs Woodland Mills WC46: engine-rated 5-inch or PTO-rated 4-inch

Compact tractor: BX52S or WC46?

Read the guide →SIDE BY SIDE

Farmry WCAP5 PRO vs Woodland Mills WC46: 5-inch gravity or 4-inch hydraulic feed

Small tractor at 15–30 PTO hp: WCAP5 PRO or WC46?

Read the guide →SIDE BY SIDE

Farmer-Helper FH-BX62S vs Woodland Mills WC46: gravity feed or hydraulic feed between 25 and 30 PTO hp

Tractor at 25–30 PTO hp: FH-BX62S or WC46?

Read the guide →
See all Woodland Mills WC46 comparisons →