acreage.EQUIPMENT
Compare0Find equipment

THE ACREAGE EQUIPMENT FIELD GUIDE

Which tractors fit the Woodland Mills WC68? Configurations near its limits

Woodland Mills rates the WC68 at 20–50 PTO hp; 172 of the 294 tractor configurations on this site are not excluded by its limits. The table lists the configurations closest to its power limits and weight, where the answer is most likely to change.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

PTO wood chippers at work
In this guide

THE DECISION IN NUMBERS

Configurations nearest the Woodland Mills WC68’s limits

Within 3 hp of 20–50 PTO hp or near its weight; up to 28 rows, sorted by PTO hp. Results from the site’s screen; † recorded source conflict.

Scroll the table sideways on smaller screens.

ConfigurationPTO hpEngine hpLift at 24 in.Screen result
Kubota L2501 HST1924.81,389 lbExcluded: under minimum
Mahindra 1626 HST †1924.81,720 lbExcluded: under minimum
Case IH Farmall 25A gear19.224.61,433 lbExcluded: under minimum
Kubota B2401DT gear19.221.91,290 lbExcluded: under minimum
Kubota B2401DTN gear19.221.91,290 lbExcluded: under minimum
Kubota BX2680 HST †19.223.3680 lbExcluded: under minimum
LS MT226E gear19.224.61,433 lbExcluded: under minimum
Mahindra 1126 HST19.225.3771 lbExcluded: under minimum
KIOTI CS2530H HST19.324.5700 lbExcluded: under minimum
KIOTI CX2510 gear19.324.51,203 lbExcluded: under minimum
LS MT225S HST †19.324.71,323 lbExcluded: under minimum
John Deere 3025E HST †19.4241,356 lbExcluded: under minimum
Kubota B2601 HST †19.423.31,411 lbExcluded: under minimum
Kubota LX2620 HST †19.423.31,676 lbExcluded: under minimum
KIOTI CK2620 gear †19.524.51,631 lbExcluded: under minimum
Massey Ferguson GC1725M HST †19.624.5661 lbExcluded: under minimum
Kubota L2502 gear †19.823.31,389 lbExcluded: under minimum
Massey Ferguson 1825E gear †20.4241,598 lbNot excluded; conflict †
Kubota L2501 gear20.524.81,389 lbNot excluded
John Deere 3025D gear20.724.721,670 lbNot excluded
TYM 2400 gear2124974 lbNot excluded
TYM 2515 gear21242,425 lbNot excluded
TYM 2515 HST21242,425 lbNot excluded
Case IH Farmall 55A gear49.3572,310 lbNot excluded
Case IH Farmall Utility 65A power shuttle cab50644,300 lbNot excluded
Case IH Farmall Utility 65C power shuttle cab50643,956 lbNot excluded
Kubota M5660SU gear5058.73,307 lbNot excluded
Massey Ferguson MF 2M.65 HST cab5065.73,483 lbNot excluded
Sources for this decision table (21)

The published range

Woodland Mills lists the WC68 at 20–50 PTO hp. Woodland Mills gives the range in PTO horsepower, so this site compares each tractor’s published PTO rating.

How 294 configurations screen

Of the 294 tractor configurations profiled on this site, 172 are not excluded, 57 fall under the minimum, 30 are over the maximum and 35 have a Category 2-only hitch. Not excluded is not approval: most pairings still need the maker or dealer to confirm the setup.

By brand

Configurations not excluded, by brand: Case IH 24 of 31; John Deere 19 of 39; KIOTI 19 of 37; Kubota 18 of 39; LS 14 of 32; Mahindra 9 of 17; Massey Ferguson 19 of 29; New Holland 17 of 18; TYM 24 of 37; Yanmar 9 of 15.

Closest exclusions

The configurations closest to the line are just under the minimum: Kubota L2502 gear † (19.8 PTO hp), Massey Ferguson GC1725M HST † (19.6 PTO hp), KIOTI CK2620 gear † (19.5 PTO hp); just over the maximum: Case IH Farmall Utility 60A gear (51 PTO hp), Kubota MX6000 HST (51.8 PTO hp), John Deere 4066M Heavy Duty HST (51.9 PTO hp). A newer spec sheet, a different transmission or the maker’s confirmation can change these.

Weight and hitch

This site retains a 747-lb weight for the WC68. No configuration that clears the power range lists less lift 24 inches behind the hitch than that; tractors with no published 24-inch lift are held for review. It mounts on a Category 1 hitch, so Category 2-only tractors are excluded.

Take these questions with you.

  1. Which exact configuration and transmission is the tractor?
  2. Does Woodland Mills confirm the WC68 at the tractor’s rating?
  3. What is the complete weight with the PTO shaft?
  4. What does the dealer list for lift 24 inches behind the hitch?

Keep these questions with your exact tractor and attachment details.

Use these questions in my seller brief

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  2. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  3. Kubota L2501 U.S. brochure, December 2014
  4. Mahindra USA 1600 Series brochure, Rev 09022025: PDF p5 tractor specifications (engine, PTO type and PTO hp by transmission, 3-point lift at 24 in., hydraulics, weight)PDF p5, Tractor Specifications: PTO and Hydraulic System rows
  5. Case IH Farmall Compact 25A specification sheet (PDF created August 22, 2023)Specifications: Engine HP 24.6, PTO HP 19.2, Cat. 1, Standard Lift Capacity @ 24 in. Behind Pin 1,433 lb, weight w/o ballast 2,469 lb
  6. Kubota 2026 full-line catalogPrinted p6: B01 series table: horsepower (gross)* SAE J1995 21.9, horsepower (PTO) 19.2, Category I, lift capacity 24" behind LP 1,290 lb, gear 9F/3R, weight 1,521 lb
  7. LS New MT2E & MT2 Series Specifications 2026 (PDF created February 27, 2026)MT226E–MT242HE columns: Engine HP (gross), PTO HP, transmission, implement pump, Category I, hitch lift capacity (hitch end) 1,808 lb
  8. Mahindra 1100 Series brochure (PDF created July 2026)Specifications: Engine HP (kW) @ RPM, PTO HP, 3-point linkage category, 3-point lift capacity, overall width, weight
  9. KIOTI CS10/CS20/CS30 brochure (PDF created August 27, 2026)PDF p12 CS30 specifications: Engine Gross, PTO hp, rated revolution 3,000 rpm, Category I, Maximum Lifting Capacity* 700 lb (*@ 24 in. aft of hitch), weight
  10. KIOTI CX Series brochure (PDF created September 18, 2025)Specifications: Engine Gross HP 24.5, PTO HP 19.3 (manual) / 18.8 (HST), PTO type transmission/live, Category I, Maximum Lifting Capacity* 1,203 lb, weight
  11. Current LS Tractor USA MT225S page — exact HST specifications and optional rear outlets
  12. John Deere current U.S. 3025E product page and linked documents
  13. KIOTI CK20 / CK20SE brochure, printed page 6
  14. Massey Ferguson GC1700 U.S. brochure, May 2023 — printed/PDF p 10
  15. Massey Ferguson U.S. E Series brochure MF20B008DS, copyright 2020 — pp 2–7
  16. John Deere 3 Series compact utility tractor brochure 3928957 (PDF created July 24, 2025)Specifications: 3025D/3035D/3043D horsepower (SAE J1995), PTO HP geared transmission, lift capacity 24 in. behind center link 1,670 lb, Category 1, gear 8F-8R, transmission-driven PTO with overrunning clutch, weight
  17. TYM 2400R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, PTO rear rpm, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, overall width, weight
  18. TYM 2515R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
  19. Case IH Farmall Compact A specification sheet, models 35A–55A (PDF created August 24, 2026)Specifications: Engine HP, PTO HP (Mechanical Trans. / Hydrostatic Trans.), 3pt Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, implement and total flow, weight
  20. Case IH Farmall utility tractors brochure (PDF created August 21, 2026)Small Utility Specifications: Engine HP, PTO HP, 3-point Hitch Category 1/2, Lift Capacity (footnote 2: measured @ 24 in. behind pin), transmission, weight
  21. Massey Ferguson MF 2M Series spec sheet (PDF created November 3, 2025)p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight

EQUIPMENT IN THIS GUIDE

Check prices and fit for the attachments discussed.

MAKE THE NEXT CHECK

Continue with the related decision.

FIELD GUIDE

Attachment weight vs. tractor lift capacity

A product weight below a three-point lift rating is only the start of a load check. The two figures may describe different measuring points, configurations or operating conditions. Subtracting them does not produce an approved safety margin.

Read the guide →FIELD GUIDE

Meeting an attachment’s minimum PTO horsepower exactly: what zero margin means

A tractor whose PTO rating equals or barely exceeds an attachment’s minimum is inside the published range, and nothing more. Several makers attach separate capacity statements well above their minimums. When the margin is zero or one horsepower, also check the source of each number and what the maker expects at that power.

Read the guide →FIELD GUIDE

When the tractor is too strong: attachment maximum horsepower

Most horsepower checks look at the minimum. Many small chippers and flail mowers also publish a maximum, and a larger tractor can be outside the range for a lighter attachment. Treat the maximum as a published limit with its own horsepower basis. Ask the maker before assuming a light attachment is the safe choice.

Read the guide →

MAKE THE TRADEOFFS CLEAR

Read a focused comparison.

SIDE BY SIDE

Farmer-Helper FH-BX42 vs Woodland Mills WC68: $1,683 gravity or $3,450 hydraulic feed

Compact tractor: FH-BX42 or WC68?

Read the guide →SIDE BY SIDE

Woodland Mills TFG55 vs WC68: gravity feed or hydraulic feed between 20 and 30 PTO hp

Woodland Mills on a 20–30 PTO hp tractor: TFG55 or WC68?

Read the guide →SIDE BY SIDE

Farmry WCAP5 Pro vs Woodland Mills WC68: gravity feed to 45 PTO hp or hydraulic feed with a 40-hp full-feed line

My tractor has 36–42 PTO hp: WCAP5 Pro or WC68?

Read the guide →
See all Woodland Mills WC68 comparisons →