FH-EFGC155 · Hammer blades

THE BUYING PERSPECTIVE

Know before you order.

• This guide covers FH-EFGC155 with hammer blades and without the optional hydraulic-offset kit. The listed SKU is FH-EFGC155; no distinct hammer-only SKU was found.
• 25–65 PTO hp on current page. The current product details explicitly label the range as PTO horsepower. The currently linked manual is Revision 12-12-17 despite its /2025/05/ upload path: p23 has a minimum-HP footnote that changes basis to engine horsepower for hydrostatic tractors, while p16 states an 80 PTO hp ceiling. These sources do not establish one reconciled limit for the delivered machine.
• 60 inches is working/cutting width; 67 inches is overall width. Neither is derived from the model number.
• Description, table and manual p23 specify 24 installed hammers; 48 Y blades are optional. The page advertises interchangeable blades and a hammer-to-grass order option. Confirm the correct compatible set and replacement procedure for the delivered rotor.
• Current page lists 741 lb product weight and 789 lb crated weight; manual p23 instead lists 720 and 755 lb. No reviewed source verifies a complete shaft/oil-inclusive operating load, so complete operating weight remains unverified.
• The page and manual p23 list 35.25 or 39.5 inches right of the center mount and two mounting positions. These are not a verified cutting-edge reach or hydraulic travel measurement. Manual p23 documents two hitch mounting positions; p20 instead describes side-to-side adjustment by a handle. Confirm which mechanism and reference dimensions apply to the delivered fixed model. No powered adjustment is assumed.
• PTO input is 540 rpm (manual pp16,19). Included shear-bolt driveline still requires tractor-specific sizing and setup.
• The separate hydraulic-offset kit is optional. The base mower does not include its rear-remote, flow, pressure or hose requirements.
• The page’s 3-inch wooded-material statement is a manufacturer claim without species, moisture or power conditions; it is not a demonstrated capacity or a reason to skip the delivered manual’s operating limits.
• The current-linked PDF retains Revision 12-12-17. Upload-directory year is not a manual revision or evidence of a newly tested configuration.
• Additional information says a 65 HP gearbox allows tractors up to 50 HP, without stating the 50 HP basis. This conflicts with the Details range ending at 65 PTO hp; do not substitute either for a reconciled seller limit.
• The main table and manual p23 say 3 belts and a Series 5 driveline; Additional information says 2 belts and Series 4. Confirm the delivered parts before buying replacements.

Published specifications

Power requirement

25–65 PTO hp on current page; linked-manual basis/limit conflicts

Rear PTO

540 rpm

Three-point hitch

Category 1

Cutting width, inches

60 inches

Unit weight

Complete operating weight is unverified. Current page: 741 lb “Weight” and 789 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 720 lb “Weight” and 755 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load.

Hydraulics

Standard fixed/nonhydraulic offset configuration; no tractor rear-remote circuit is required for an offset cylinder because the hydraulic kit is excluded. The tractor three-point lift is still required. A separate hydraulic-offset kit is offered, but its flow/pressure, valve, couplers and exact installed configuration require a separate check.

Accessories & setup

Page lists an included shear-bolt PTO driveline for standard 1-3/8-inch six-spline input. Main table and manual identify Series 5; confirm exact delivered shaft and sizing. Optional hydraulic-offset kit, blade-swap choice, spare belts/blades and liftgate service are separate order decisions. Assembly and lubrication checks remain required; photo is not evidence of supplied parts.

Specifications are manufacturer-published, not measured by Acreage Equipment. A shipping weight is not treated as operating weight.