BX72RI

THE BUYING PERSPECTIVE

Know before you order.

• The current page lists 45–85 engine HP for the BX72RI; Wallenstein’s lineup page gives 50–85 for the BX72R. The BXR manual’s §10.1 table, headed BX72R, gives 50–85 hp without a basis. This site screens the BX72RI on the page’s figure and flags the conflict.
• Mounting: Cat I iMatch & Quick Hitch compatible and Cat II on the current page. The manual’s hitching section says the BX72R models are Category I.
• Hydraulic feed: 3–6 gpm. Without a rear remote, the feed needs Wallenstein’s PTO-driven power pack.
• Capacity 7 inches; rotor 28 inches with four reversible knives; discharge 90 inches high, 360° rotation.
• Rated speed 540–1000 rpm; run the speed the delivered driveline is built for.
• Wallenstein lists no price; ask a dealer.

Published specifications

Power requirement

45–85 engine hp · current U.S. page (manual table: 50–85 hp for the BX72R)

Rear PTO

540–1000 rpm · confirm the correct driveline configuration

Three-point hitch

Category 1 / 2

max. chip diameter

7 inches

Unit weight

1300 lb — Total weight 1,300 lb on the current page and operating weight 1,300 lb in the BXR manual §10.1. Neither says whether the PTO shaft is included.

Hydraulics

Dual hydraulic feed rollers need 3–6 gpm. The manual runs them from the tractor’s hydraulics or from the optional self-contained, PTO-driven power pack for tractors without a hydraulic supply.

Accessories & setup

Options in the manual: self-contained PTO power pack, hydraulic winch, hydraulic feed-roller lift; P3 PULSE electronic feed control. Confirm which ship with the order.

Specifications are manufacturer-published, not measured by Acreage Equipment. A shipping weight is not treated as operating weight.