acreage.EQUIPMENT
Compare0Find equipment

LS · COMPACT TRACTOR ATTACHMENTS

LS MT352
Attachments that fit.

The MT352 is the MT342’s frame with a 52-hp engine and, in LS’s current brochure and model page, a Category 2 hitch. That hitch matters more than the power: most of the chippers and mowers on this site list Category 1 only, so the shortlist narrows to attachments that document Category 2 mounting.

41.6–44.2PTO hp52engine hp2hitch category2,469lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 13, 2026 · Specification research, not a field test

LS MT352 compact tractor
Manufacturer photo · LS

PTO WOOD CHIPPERS FOR THE MT352

Chippers that fit the MT352.

6 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full chipper guide
WoodMaxx WM-8M PTO wood chipperPTO chipper

WoodMaxx

WM-8M

8″ max. chip diameter · 19 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Resolve the conflicting published specifications for the exact model revision.

$3,690checked November 7, 2026
Check current price at WoodMaxx
Fit details
WoodMaxx WM-8H PTO wood chipperPTO chipper

WoodMaxx

WM-8H

8″ max. chip diameter · 19 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$4,095checked November 7, 2026
Check current price at WoodMaxx
Fit details
WoodMaxx MX-9900 PTO wood chipperPTO chipper

WoodMaxx

MX-9900

9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$6,990checked November 7, 2026
Check current price at WoodMaxx
Fit details
WoodMaxx MX-8800 PTO wood chipperPTO chipper

WoodMaxx

MX-8800

8″ maximum chip diameter, inches · 20 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$5,890checked November 7, 2026
Check current price at WoodMaxx
Fit details
Wallenstein BX72S PTO wood chipperPTO chipper

Wallenstein

BX72S

7″ max. chip diameter · 50–85 engine hp · official U.S. page

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
Wallenstein BX72RI PTO wood chipperPTO chipper

Wallenstein

BX72RI

7″ max. chip diameter · 45–85 engine hp · current U.S. page (manual table: 50–85 hp for the BX72R)

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
13 ruled out by published specs
  • Farmry WCAP5 — 52 engine hp exceeds the published 45 hp range.
  • Woodland Mills WC88 — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • Woodland Mills WC68 — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • Wallenstein BX52S — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • Farmer-Helper FH-BX62S — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • Woodland Mills WC46 — 44.2 PTO hp exceeds the published 30 hp range.
  • Woodland Mills TFG55 PTO — 44.2 PTO hp exceeds the published 30 hp range.
  • Farmer-Helper FH-BX42 — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • Farmry WCAP5 PRO — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • Wallenstein BX36S — 52 engine hp exceeds the published 30 hp range.
  • Wallenstein BX102S — 52 engine hp is below the 80 hp minimum.
  • Wallenstein BX52RI — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • Wallenstein BX102RI — 52 engine hp is below the 75 hp minimum.

FLAIL MOWERS FOR THE MT352

Flail mowers that fit the MT352.

6 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmry HFS87 flail mowerFlail mower

Farmry

HFS87

87″ cutting width · 30–85 HP (basis not stated) · official page and manual

Gear: Possible — confirm detailsHST: Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$4,499checked November 14, 2026
Check current price at Farmry
Fit details
17 ruled out by published specs
  • Land Pride FM2560 · hammer rotor — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • TMG Industrial TMG-TFM60 — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • TMG Industrial TFMS50 — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • WoodMaxx FM-62 · Hammer blades — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • Farmer-Helper FH-EFGC155 · Hammer blades — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • Farmry LFP47 — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • Farmry LFS61 — Both engine (52) and PTO (44.2) horsepower exceed the published 35 hp maximum.
  • WoodMaxx FM-54 · Y-blades — 44.2 PTO hp exceeds the published 25 hp range.
  • Farmer-Helper FH-EF95 — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • Farmer-Helper FH-EF105 — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • Farmer-Helper FH-EF125 — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • Farmry LFS45 — Both engine (52) and PTO (44.2) horsepower exceed the published 35 hp maximum.
  • Farmry LFS53 — Both engine (52) and PTO (44.2) horsepower exceed the published 35 hp maximum.
  • Farmer-Helper FH-EFGC125 · Hammer blades — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • WoodMaxx FM-62 · Y-blades — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • WoodMaxx FM-62H · Hammer blades — The attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface.
  • Blue Diamond Heavy Duty 403740 — Both engine (52) and PTO (44.2) horsepower are below the published 75 hp minimum.
Scope of this guideU.S. MT352 · 16F/16R synchro shuttle gear · open-station ROPS · independent PTO / U.S. MT352H · 3-range HST · open-station ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

Confirm the hitch category on the actual tractor first. If it is Category 2, choose among attachments that document Category 2 mounting, then use the PTO rating for the exact transmission (44.2 or 41.6, depending on the source) and the 52-hp engine figure for engine-rated products.

  • LS lists 52 gross engine hp at 2,600 rpm. The brochure gives 44.2 PTO hp to the gear tractor and 41.6 to the HST; the current model page and 2022 comparison sheet reverse them.
  • The 2025 brochure and current page list Category 2. A 2022 LS comparison sheet listed Category 1 for the same models, so ask which lift arms are fitted.
  • On a Category 2 hitch, WC88, WC68, BX52S, FH-BX62S and every Category 1-only flail screen out on hitch evidence, whatever their power range.
  • Category 1/2 options remain: WoodMaxx WM-8M, WM-8H and MX-9900 chippers, Wallenstein BX72S (52 clears its 50-engine-hp minimum by 2.0), the FM-78 family and Land Pride FM2572 and FM2584.
  • FM2584’s 49-hp minimum is met on engine power but not on either PTO figure; FM2572’s 42 is missed by 0.4 hp at the HST’s brochure figure of 41.6.
  • 52 engine hp exceeds Farmry WCAP5’s 45-engine-hp ceiling. Lift: 2,469 lb at 24 inches in the September 2025 owner manual.

Choose the exact configuration.

U.S. MT352 · 16F/16R synchro shuttle gear · open-station ROPS · independent PTO

44.2 PTO hp

LS MT352 gear (synchro shuttle) open-station ROPS tractor, MT3 Series, as listed in the July 2025 U.S. brochure, the current model page and the 2022 LS comparison sheet. The MT352PCT power-clutch model is a separate configuration and is not covered. No model-year or serial cutoff is established.

Engine power
52 hp · 52.0 gross engine hp at 2,600 rpm in the 2025 MT3 brochure (“Engine HP (gross)”), with no SAE standard named. The 2022 comparison sheet calls it advertised rated power. This is not PTO power.
Rear hitch
Category 2 in the 2025 brochure, current model page and September 2025 owner manual (a 2022 comparison sheet says Category 1). Position and draft control; telescoping lower links
Lift at 24 inches
2,469 lb · 2,469 lb (1,120 kgf) “24" behind lift point” in the September 2025 MT342/MT347/MT352/MT357 owner manual (p7-4). LS’s brochure, model pages and comparison sheets give only 2,755 lb at the hitch (link) ends.
Lift at link ends
2,755 lb
Hydraulics
8.2 gpm implement pump; 12.3 gpm total including 4.1 gpm steering (gear models). Two pairs of rear remotes are listed as standard on ROPS tractors; outlet flow is not published.
Pressure
17.0 MPa (2,466 psi) system pressure in the September 2025 owner manual (p7-4). Rear-remote outlet flow is not published; confirm it with the dealer.
Find attachments for this tractor

U.S. MT352H · 3-range HST · open-station ROPS · independent PTO

41.6 PTO hp

LS MT352H three-range hydrostatic open-station ROPS tractor, MT3 Series, as listed in the July 2025 U.S. brochure, the current model page and the 2022 LS comparison sheet. The MT352HC cab lists a 4,446-lb weight. No model-year or serial cutoff is established.

Engine power
52 hp · 52.0 gross engine hp at 2,600 rpm in the 2025 MT3 brochure (“Engine HP (gross)”), with no SAE standard named. The 2022 comparison sheet calls it advertised rated power. This is not PTO power.
Rear hitch
Category 2 in the 2025 brochure, current model page and September 2025 owner manual (a 2022 comparison sheet says Category 1). Position and draft control; telescoping lower links
Lift at 24 inches
2,469 lb · 2,469 lb (1,120 kgf) “24" behind lift point” in the September 2025 MT342/MT347/MT352/MT357 owner manual (p7-4). LS’s brochure, model pages and comparison sheets give only 2,755 lb at the hitch (link) ends.
Lift at link ends
2,755 lb
Hydraulics
8.2 gpm implement pump; 13.7 gpm total including 5.5 gpm steering on the HST ROPS model (15.0 gpm on the HST cab). Two pairs of rear remotes listed as standard on ROPS tractors; outlet flow is not published.
Pressure
17.0 MPa (2,466 psi) system pressure in the September 2025 owner manual (p7-4). Rear-remote outlet flow is not published; confirm it with the dealer.
Find attachments for this tractor

Where the documents disagree.

PTO horsepower by transmission

LS’s 2025 brochure prints 44.2 PTO hp under the MT352 and MT352C (gear) columns and 41.6 under MT352H and MT352HC (HST). The current MT352 model page lists “44.2 Hydr / 41.6 Gear”, the reverse. The 2022 comparison sheet gives “Basic / Optional Transmission” as 41.6 / 44.2, matching the web page.

This profile uses the brochure’s column assignment, the newest dated document, and flags every result that depends on it. Ask the dealer for the PTO rating of the actual serial and transmission; a decision that changes between 41.6 and 44.2 PTO hp is not settled by these sources.

Three-point hitch category

The 2025 brochure lists CAT II for MT352 and MT357, and the current MT352 model page specification also says “CAT 2”. The 2022 comparison sheet lists Category 1 for MT352H/HC/C and Category 2 only for the separate MT352PCT power-clutch model. The September 2025 owner manual lists the three-point linkage as “CAT.2, in conformity with ISO 730:2014” for all four MT3 models.

The two current sources agree on Category 2, which is used here. Category 1-only attachments therefore screen as a hitch mismatch. If a dealer confirms Category 1 lift arms or an approved conversion, re-screen with that arrangement in writing.

Three-point lift capacity

The brochure, model-page specification tables and both comparison sheets give 2,755 lb at the hitch (link) ends, and the comparison sheets mark lift 24 inches behind the pins “np”. The model-page feature list gives a “hitch lift capacity of 1,808 lbs.” with no measurement point. The September 2025 owner manual lists 2,469 lbf 24 inches behind the lift point and 2,756 lbf at the lower-link ends.

The manual’s 2,469 lb is used as the 24-inch lift and 2,755 lb as the link-end figure. The unscoped 1,808-lb feature-list figure is not used.

Gear transmission speeds

The 2025 brochure and 2022 comparison sheet list a 16F/16R gear (synchro shuttle) transmission; the current model-page feature list describes a “Standard 12×12 Synchro Shuttle”.

The specification-table figure (16F/16R) is used. Confirm the transmission on the actual tractor; it does not change an attachment screen here.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 13, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. LS Tractor MT3 Series brochure (LS-Tractor-Brochure_MT3_Update_v5, PDF dated July 18, 2025): p2 MT342 / MT347 / MT352 / MT357 specificationsp2 Specifications table: Engine HP (gross), PTO (HP) by column, Total Flow, Category (3pt Hitch), Hitch Lift Capacity Hitch End, Total Weight
  2. LS Tractor USA MT352 / MT352H / MT352HC / MT352C model pageSummary figures; Features list; Specifications: PTO HP, Category 3 pt hitch, Hitch Lift capacity (Hitch end)
  3. LS Tractor model comparison sheet linked from the model pages (PDF modified April 2022)p2 MT3 columns: PTO Horsepower, Basic / Optional Transmission; 3-Point Hitch Category; Standard Lift Capacity 24 inches behind pin (np) and at lift pin
  4. LS MT342 / MT347 / MT352 / MT357 owner manual (PDF created September 8, 2025), linked from LS Tractor USA’s owner-manuals pageChapter 7 Dimension and Specification, p7-4: 3 point linkage CAT.2; system pressure 17.0 MPa (2,466 psi); lift capacity lower link end 1,250 kgf (2,756 lbf), 24" behind lift point 1,120 kgf (2,469 lbf); p7-3 rated power and weights
  5. Official WM-8H product page: power, feed, hitch and price
  6. WM-8H linked manual — assembly p20 and maintenance p29 give different fill quantities
  7. WoodMaxx current manual index
  8. Official WM-8M page: configuration, 775 lb hitch weight and price
  9. WM-8M manual linked by current WoodMaxx manual index
  10. WoodMaxx FAQ, question 1: mechanical versus hydraulic feed
  11. Official FM-78H page: hammer option, price, equipment and conflicting weights
  12. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41 specifications
  13. Official FM-78 page: exact hammer variant, price and equipment
  14. Official MX-9900 page: power/capacity claims, feed, hitch and current sale price
  15. MX-9900 manual Rev C, September 18, 2026: specifications and setup
  16. Wallenstein BX72S current U.S. page — engine power, current hitch categories, capacity, accessories and reference mass
  17. BX72S official support page — current operator/setup documents
  18. BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,26,28,30,40
  19. PTO shaft instructions Z97844_En, Rev Aug-2024 — tractor/quick-hitch sizing
  20. Land Pride FM25 current North American family and model listing
  21. Official FM25 public catalog response — active models, gallery and linked documents
  22. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  23. Official FM25 brochure — printed p12 model table
  24. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  25. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

LS MT352 wood chippers: a Category 2 hitch narrows the list

With 41.6 to 44.2 PTO hp and 52 engine hp, the MT352 is inside the power range of most chippers on this site. Its Category 2 hitch, listed in LS’s 2025 brochure and current model page, is what decides the shortlist. WoodMaxx’s WM-8M, WM-8H and MX-9900 document Category 1 or 2 mounting, and Wallenstein’s BX72S becomes available because 52 engine hp clears its 50-hp minimum.

Read the guide →FIELD GUIDE

LS MT352 flail mowers: Category 2 mowers, and a 0.4-hp question on FM2572

On a Category 2 MT352 the flail shortlist is WoodMaxx’s 70-inch FM-78 family and Land Pride’s FM2572 and FM2584. FM-78 is inside its 30–65-PTO-hp range by more than 11 hp. The Land Pride models depend on the horsepower basis: 52 engine hp clears both minimums, while the PTO figures miss FM2584’s 49 and, for the HST’s 41.6, miss FM2572’s 42 by 0.4.

Read the guide →