Case IH · COMPACT TRACTOR ATTACHMENTS

Case IH Farmall 35C
Attachments that fit.

The Case IH Farmall 35C has 35 engine hp, 29.7 PTO hp with the 12x12 shuttle or 28.0 with the HST, and the New Holland Boomer 35’s power. Both versions sit just under the 30-hp ceilings of Woodland Mills WC46 and TFG55 and just short of WoodMaxx FM-78’s 30-PTO-hp minimum.

28–29.7PTO hp35engine hp1hitch category1,808lb lift at 24 in.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Case IH Farmall 35C hub: Farmall 35C compact tractor (C series) product photo
Manufacturer photo · Case IH

PTO WOOD CHIPPERS FOR THE FARMALL 35C

Chippers that fit the Farmall 35C.

13 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. “Specs line up” cards come first.

Full chipper guide
Woodland Mills TFG55 PTO PTO wood chipperPTO chipper

Woodland Mills

TFG55 PTO

5″ max. chip diameter · 12–30 PTO hp in table; manual hitch paragraph says 15–30 — resolve before selection

Gear: Possible — confirm detailsHST: Possible — confirm details

Resolve the conflicting published specifications for the exact model revision.

$2,415checked November 7, 2026
Check current price at Woodland Mills
WoodMaxx MX-9900 PTO wood chipperPTO chipper

WoodMaxx

MX-9900

9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$6,990checked November 7, 2026
Check current price at WoodMaxx
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$2,392checked November 7, 2026
Check current price at Farmer-Helper

7 more possible options in the full comparison table — see all.

6 ruled out by published specs

FLAIL MOWERS FOR THE FARMALL 35C

Flail mowers that fit the Farmall 35C.

16 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmry LFP47 flail mowerFlail mower

Farmry

LFP47

47.2″ cutting width, inches · 25–45 hp · basis unclear

Gear: Possible — confirm detailsHST: Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$2,199checked November 7, 2026
Check current price at Farmry
Farmry LFS61 flail mowerFlail mower

Farmry

LFS61

61″ cutting width · 15–35 hp · basis unclear

Gear: Possible — confirm detailsHST: Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$1,899checked November 6, 2026
Check current price at Farmry

10 more possible options in the full comparison table — see all.

7 ruled out by published specs
Scope of this guideU.S. Farmall 35C · 12x12 mechanical shuttle with synchro shift · MFD · ROPS · independent PTO / U.S. Farmall 35C · 3-range hydrostatic · MFD · ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

Woodland Mills WC46, TFG55 and WC68, Farmry WCAP5, WoodMaxx’s chippers and the 45-PTO-hp chippers fit for chipping. WoodMaxx FM-62, Farmer-Helper FH-EFGC and Farmry LFP47 are the flails with room.

  • Brochure and page: 35 engine hp; 29.7 PTO hp (gear), 28.0 (HST); Category 1.
  • Lift: Case IH lists 1,808 lb “at 24 in.”; New Holland gives 1,808 at the ball ends and 1,345 at 24 in. for the Boomer 35.
  • Woodland Mills WC46 / TFG55 (to 30 PTO hp): inside by 0.3 / 2.
  • WoodMaxx FM-78 (30 PTO hp): 0.3 / 2 short.
  • Wallenstein BX36S (to 30 engine hp): 5 over.
  • 3,175 lb non-cab.

Choose the exact configuration.

U.S. Farmall 35C · 12x12 mechanical shuttle with synchro shift · MFD · ROPS · independent PTO

29.7 PTO hp

Current U.S. Case IH Farmall 35C (deluxe C series, MFD) from the 2023 compact brochure and the current model page. 3,175 lb non-cab.

Engine power
35 hp · 35 engine hp at rated engine rpm (2,600) in the Case IH brochure and the current page’s rated engine power; gross or net is not stated. It is not PTO power.
Rear hitch
Category 1
Lift at 24 inches
1,808 lb · 1,808 lb “Lift Capacity @ 24 in. Behind Pin” in the Case IH brochure; see the note on New Holland’s matching figure.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
8.2 gpm implement pump in the brochure.
Pressure
Not published in the reviewed brochure.
Find attachments for this tractor

U.S. Farmall 35C · 3-range hydrostatic · MFD · ROPS · independent PTO

28 PTO hp

Current U.S. Case IH Farmall 35C (deluxe C series, MFD) from the 2023 compact brochure and the current model page. 3,175 lb non-cab.

Engine power
35 hp · 35 engine hp at rated engine rpm (2,600) in the Case IH brochure and the current page’s rated engine power; gross or net is not stated. It is not PTO power.
Rear hitch
Category 1
Lift at 24 inches
1,808 lb · 1,808 lb “Lift Capacity @ 24 in. Behind Pin” in the Case IH brochure; see the note on New Holland’s matching figure.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
8.2 gpm implement pump in the brochure.
Pressure
Not published in the reviewed brochure.
Find attachments for this tractor

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023)Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
  2. Case IH Farmall Compact 35C current U.S. product pagePTO Horsepower: 29.7 / 28 (Gear/Hydro)
  3. Farmry official product specifications
  4. Farmry WCAP5 operator manual, Rev 1.5 — Printed pp19–20 specifications; pp30–34 driveline checks
  5. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  6. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  7. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  8. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  9. Woodland Mills TFG55 PTO official U.S. product page
  10. Woodland Mills TFG55 PTO operator manual, Rev B, 15-Oct-2024 — Printed p9 weight/minimum HP; p11 hitch paragraph; p13 included parts
  11. Official LFP47 product page: configuration, weight and price
  12. LFP Series operator manual, Rev 1.3, printed pp17–20
  13. Official FM-62 page: exact hammer variant, price and equipment
  14. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  15. WoodMaxx manual index: Models 2025 to current
  16. Official FM-78 page: exact hammer variant, price and equipment
  17. Official Betstco FH-EFGC155 product page: exact model, current USD offer, dimensions and conflicting specifications
  18. Currently linked EFGC standard manual, Revision 12-12-17, pp16–23
  19. Official EFGC series: fixed models and separate hydraulic-offset kits
  20. Official Betstco manual index

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.