Case IH Farmall 45C · FLAIL MOWERS

Case IH Farmall 45C flail mowers: FM-62 or Land Pride FM2572

WoodMaxx FM-62 runs 24–45 PTO hp, and the 45C’s 38.2 and 36.0 are inside. Land Pride FM2572 starts at 42 hp without a basis: the 45-hp engine clears it and neither PTO figure does. FM-78, Farmer-Helper FH-EFGC, TMG, Farmry LFP47 and Land Pride FM2560 fit.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

PUT THIS GUIDE TO WORK

See published mismatches and the checks still needed.

Case IH Farmall 45C hub: Farmall 45C compact tractor (C series) product photo
Manufacturer photo · Case IH
Flail mowers at work

BEST MATCHES FOR THE FARMALL 45C

Flail mowers to shortlist.

17 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Farmry LFP47 flail mowerFlail mower

Farmry

LFP47

47.2″ cutting width, inches · 25–45 hp · basis unclear

Gear: Possible — confirm detailsHST: Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$2,199checked November 7, 2026
Check current price at Farmry

11 more possible options in the full comparison table.

6 ruled out by published specs

THE DECISION IN NUMBERS

Flail screens for Farmall 45C gear (38.2 PTO) and HST (36.0 PTO), 45 engine hp

Tractor reference: Case IH Farmall 45C; Category 1.

Scroll the table sideways on smaller screens.

MowerPublished requirementGear 38.2HST 36.0
WoodMaxx FM-62 family24 (or 20)–45 PTO hpInside (6.8 under)Inside (9 under)
Land Pride FM257242–80 hp, basis unspecifiedEngine inside; PTO 3.8 shortEngine inside; PTO 6 short
WoodMaxx FM-78 family30–65 PTO hpInsideInside
Farmer-Helper FH-EFGC155 / 12525 / 22–65 PTO hp (page)InsideInside
TMG TFM60 / TFMS5030–60 hp; 50 PTO hp manual capInsideInside
Farmry LFP4725–45 hpInside (engine exactly 45)Inside (engine exactly 45)
Land Pride FM256033–80 hpInsideInside
Farmry HFS8730–85 hp, basis unspecified; Category I/II; 87-in. cutInside on both figuresInside on both figures
Farmer-Helper FH-EF95 / EF105 / EF12515 / 16 / 20–45 PTO hp; Category I; 37 / 41 / 48-in. cutInsideInside
Land Pride FM258449–80 hpExcludedExcluded
Sources for this decision table (19)

FM2572 on engine power only

Land Pride lists FM2572 from 42 hp. The 45-hp engine clears it; the 38.2 and 36.0 PTO figures do not. Ask Land Pride which basis applies. The comparison below sets FM2572 against FM-62.

LFP47 at its limit

Farmry rates LFP47 at 25–45 hp without a basis. The 45C’s engine is exactly at the maximum; both PTO figures are inside.

Width

FM2572 cuts 72 inches, FM-78 70 and FM-62 55. A mid-size compact’s rear tires are usually covered only by the 70-inch class or wider; Farmry’s HFS87 cuts 87.

Lift

FM-78H at 968 lb is the heaviest mower here, under New Holland’s 2,116 lb at 24 inches for the matching Boomer 45.

Farmry HFS87: 87-inch cut, Category I and II

Farmry rates the HFS87 at 30–85 hp without saying whether that is PTO or engine power, lists Category I and II, cuts 87 inches and weighs 1,299 lb with the shaft. The Case IH Farmall 45C’s 38.2 / 36 PTO hp and 45 engine hp are both inside that range, so the basis does not change the result. Its published lift at 24 inches, 2,756 lb, carries that weight with 1,457 lb to spare; check front ballast all the same. Its gearbox rating, 50 hp, is not below this tractor’s PTO power. The 87-inch cut is 3 inches wider than Land Pride’s FM2584. Farmry’s page listed it at $4,499 on November 14, 2026.

Farmer-Helper FH-EF standard-duty mowers

Farmer-Helper rates its standard-duty FH-EF mowers by PTO power, all to 45 PTO hp with a 45-hp gearbox: the EF95 (37-inch cut) from 15, the EF105 (41-inch) from 16 and the EF125 (48-inch) from 20. They carry Y-blades for grass and light brush. The Case IH Farmall 45C’s 38.2 / 36 PTO hp is inside all three. Its published lift at 24 inches, 2,756 lb, carries even the 390-lb EF125 with 2,366 lb to spare. This tractor has the power for heavier mowers; the FH-EF line suits grass and light growth, not thick brush. Betstco listed them at $1,462, $1,547 and $1,632 on November 14, 2026, with the PTO shaft included.

THE SCREEN, WITH ITS LIMITS VISIBLE

Compare each configuration.

No pairing below is manufacturer-confirmed. “Preliminary” still requires implement limits, load center, ballast, hitch geometry and shaft checks.

Initial specification screen only. Scroll the table on small screens. Read the product page for every remaining check.

AttachmentU.S. Farmall 45C · 16x16 mechanical shuttle with synchro shift · MFD · ROPS · independent PTO38.2 PTO hpU.S. Farmall 45C · 3-range hydrostatic · MFD · ROPS · independent PTO36 PTO hp
Farmry LFS45 →355 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18Published mismatchBoth engine (45) and PTO (38.2) horsepower exceed the published 35 hp maximum.Published mismatchBoth engine (45) and PTO (36) horsepower exceed the published 35 hp maximum.
Farmry LFS53 →395 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18Published mismatchBoth engine (45) and PTO (38.2) horsepower exceed the published 35 hp maximum.Published mismatchBoth engine (45) and PTO (36) horsepower exceed the published 35 hp maximum.
Farmry LFS61 →421 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18Published mismatchBoth engine (45) and PTO (38.2) horsepower exceed the published 35 hp maximum.Published mismatchBoth engine (45) and PTO (36) horsepower exceed the published 35 hp maximum.
TMG Industrial TMG-TFM60 →650 lb · Product-page operation weight; manual gives conflicting 270 kg (about 595 lb)Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.
Farmry LFP47 →464 lb · 464 lb including PTO shaft on the product page; current Rev 1.3 manual lists 210 kg / 463.7 lb. Shipping weight is a separate 671 lb.Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.
TMG Industrial TFMS50 →660 lb · Product-page operation weight: 660 lb. Manual structure weight: 300 kg (about 661 lb); shaft and fluid inclusion are not explicit. Shipping weight: 770 lb.Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.
WoodMaxx FM-54 · Y-blades →408 lb · Current 2025-and-newer manual p40 lists 408 lb product weight without stating shaft inclusion. Page instead says 410 lb mower-only plus a 39 lb shaft. Do not treat 408 lb as a verified complete operating assembly; confirm delivered Y-blade weight. Shipping page figure is 500 lb.Published mismatch38.2 PTO hp exceeds the published 25 hp range.Published mismatch36 PTO hp exceeds the published 25 hp range.
WoodMaxx FM-62H · Hammer blades →860 lb · Current 2025-and-newer manual, printed p40 / PDF p41: 860 lb product weight; shaft/oil/packaging inclusion is unstated. Page instead lists 716 lb mower-only plus a 39 lb shaft. Shipping is separately labeled 860 lb. Do not treat the manual number as verified complete operating weight; confirm delivered hammer assembly.Needs specification reviewConfirm rear remotes, hydraulic flow and pressure requirements.Needs specification reviewConfirm rear remotes, hydraulic flow and pressure requirements.
WoodMaxx FM-78H · Hammer blades →968 lb · Current 2025-and-newer manual, printed p40 / PDF p41: 968 lb product weight; shaft/oil/packaging inclusion is unstated. Page instead lists 804 lb mower-only plus a 39 lb shaft. Shipping is separately labeled 1000 lb. Do not treat the manual number as verified complete operating weight; confirm delivered hammer assembly.Needs specification reviewConfirm rear remotes, hydraulic flow and pressure requirements.Needs specification reviewConfirm rear remotes, hydraulic flow and pressure requirements.
WoodMaxx FM-62 · Hammer blades →774 lb · Current 2025-and-newer manual printed p40 / PDF p41 lists 774 lb product weight without shaft/oil/packaging inclusion. Page lists 641 lb mower-only plus a 39 lb shaft; shipping is separately labeled 800 lb. Retain these distinct bases and confirm complete operating weight for the delivered hammer assembly.Needs specification reviewResolve the conflicting published specifications for the exact model revision.Needs specification reviewResolve the conflicting published specifications for the exact model revision.
WoodMaxx FM-78 · Hammer blades →880 lb · Current 2025-and-newer manual printed p40 / PDF p41 lists 880 lb product weight without shaft/oil/packaging inclusion. Page lists 710 lb mower-only plus a 39 lb shaft; shipping is separately labeled 900 lb. Retain these distinct bases and confirm complete operating weight for the delivered hammer assembly.Needs specification reviewResolve the conflicting published specifications for the exact model revision.Needs specification reviewResolve the conflicting published specifications for the exact model revision.
Farmer-Helper FH-EFGC125 · Hammer blades →Operating weight unconfirmed · Complete operating weight is unverified. Current page: 576 lb “Weight” and 624 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 600 lb “Weight” and 635 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.
Farmer-Helper FH-EFGC155 · Hammer blades →Operating weight unconfirmed · Complete operating weight is unverified. Current page: 741 lb “Weight” and 789 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 720 lb “Weight” and 755 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.
WoodMaxx FM-62 · Y-blades →Operating weight unconfirmed · Complete Y-configuration operating weight is unverified. Current manual p40 gives 774 lb generic product weight without shaft/oil or blade-specific inclusion. Page gives 641 lb mower-only plus 39 lb shaft and separately 800 lb shipping. These bases conflict or lack scope; none substitutes for an assembled Y operating load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.
WoodMaxx FM-78 · Y-blades →Operating weight unconfirmed · Complete Y-configuration operating weight is unverified. Current manual p40 gives 880 lb generic product weight without shaft/oil or blade-specific inclusion. Page gives 710 lb mower-only plus 39 lb shaft and separately 900 lb shipping. These bases conflict or lack scope; none substitutes for an assembled Y operating load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.
Land Pride FM2560 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 965 lb for the standard unit with a duckfoot rotor; the brochure lists 929 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 222 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load.Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.
Land Pride FM2572 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 1,040 lb for the standard unit with a duckfoot rotor; the brochure lists 1,040 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 261 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load.Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.
Land Pride FM2584 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 1,236 lb for the standard unit with a duckfoot rotor; the brochure lists 1,168 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 301 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load.Published mismatchBoth engine (45) and PTO (38.2) horsepower are below the published 49 hp minimum.Published mismatchBoth engine (45) and PTO (36) horsepower are below the published 49 hp minimum.
Blue Diamond Heavy Duty 403740 →1763 lb · 1,763 lb (800 kg) in the Aug-2025 spec sheet (without PTO) and the Feb-2026 manual p49. Add the PTO shaft for the operating load.Published mismatchBoth engine (45) and PTO (38.2) horsepower are below the published 75 hp minimum.Published mismatchBoth engine (45) and PTO (36) horsepower are below the published 75 hp minimum.
Farmry HFS87 →1299 lb · 1,299 lb (589 kg) including PTO shaft on the product page and in the HFS manual Rev 1.6, printed p17.Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.
Farmer-Helper FH-EF95 →330 lb · 330 lb retained, the heavier of the product page (325 lb) and the FH-EF manual p13 (330 lb); crated 360 lb. Neither says whether the included PTO shaft is counted.Needs specification reviewConfirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.Needs specification reviewConfirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.
Farmer-Helper FH-EF105 →347 lb · 347 lb retained, the heavier of the product page (342 lb) and the FH-EF manual p13 (347 lb); crated 377 lb. Neither says whether the included PTO shaft is counted.Needs specification reviewConfirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.Needs specification reviewConfirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.
Farmer-Helper FH-EF125 →390 lb · 390 lb retained, the heavier of the product page (390 lb) and the FH-EF manual p13 (383 lb); crated 438 lb. Neither says whether the included PTO shaft is counted.Needs specification reviewConfirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.Needs specification reviewConfirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.
GO DEEPER

Land Pride FM2572 hammer vs WoodMaxx FM-62 hammer: 72 inches on an unstated basis or 55 inches on a PTO rule

My tractor has about 36 PTO hp and 48 engine hp: can I run the wider FM2572, or should I buy FM-62?

Read the guide →
FIELD GUIDE

Before-you-buy checklist

Take the complete setup, not just a horsepower number, to the manufacturer.

Read the guide →

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023)Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
  2. Case IH Farmall Compact 45C current U.S. product pageRated Engine Power 45 hp; PTO Horsepower: 38.2 / 36 (Gear/Hydro)
  3. WoodMaxx FM-62 official product pageHammer SKU FM-62-0006; mower-only and shaft weights; price
  4. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41Printed p40: FM-62 24–45 PTO hp (hammer), 774 lb; FM-78 30–65 PTO hp, 880 lb
  5. Land Pride FM25 operator manual 333-138M (7/1/24)Printed p14 / PDF p18 Tractor Requirements; printed pp16–17 hitch positions; printed p39 / PDF p43 widths, weights, rotor assemblies
  6. Land Pride FM25 brochurePrinted p12 model table
  7. Land Pride FM25 Series product pageFM2560 / FM2572 / FM2584 model listing; dealer quote
  8. WoodMaxx FM-78 official product pageBlack/hammer SKU FM-78-0006; 30–65 PTO hp; 70-in. cut; 80 in. overall; weight; hitch type; price
  9. Farmer-Helper FH-EFGC155 · Hammer blades official product pageHP Requirements at PTO (25–65); Cutting Width; Overall Width; Weight; price
  10. TMG Industrial official U.S. TFM60 product page — Current price, operation weight, width and shipping weightPrice, operation weight, width and 30–60 HP range
  11. TMG TFMS50/60/72 manual, 2025-01-09p6: tractor power must not exceed 50 PTO hp; cutting width 1,250 mm
  12. Farmry LFP47 official product pageSpecifications > Tractor Power Range; 32 Y-blades; Weight (includes PTO shaft); price
  13. Farmry HFS87 official product pageTractor power 30–85 HP (basis not stated); gearbox 50 HP; 87-in. cut, 96-in. overall; Category I/II; 1,299 lb with PTO shaft; price $4,499
  14. Farmry HFS/HFSS Series operator manual, Rev 1.6Printed p17 specifications: HFS87 30–85 HP, gearbox 50 HP (36.75 kW), 2,200-mm cut, Category I/II, 589 kg
  15. Farmer-Helper FH-EF Series Manual (June 2025)p13 Machine Specs: Min. PTO HP Req. 14–28 by model (EF95 15, EF105 16, EF125 20), CAT I, gearbox 45 HP, working width, weight
  16. Farmer-Helper FH-EF95 official product pageRequires 15–45 PTO horsepower; gearbox 45 HP; 37-in. working width; Cat I; weight; price ($1,462 sale)
  17. Farmer-Helper FH-EF105 official product pageRequires 16–45 PTO horsepower; gearbox 45 HP; 41-in. working width; Cat I; weight; price ($1,547 sale)
  18. Farmer-Helper FH-EF125 official product pageRequires 20–45 PTO horsepower; gearbox 45 HP; 48-in. working width; Cat I; weight; price ($1,632 sale)
  19. Farmry official product specifications
  20. Farmry WCAP5 PRO operator manual, Rev 1.4 — Printed p13 specifications; pp21–22 conflicting horsepower paragraphs
  21. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  22. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  23. Official U.S. WC88 page: price, capacity and drive system
  24. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  25. LFP Series operator manual, Rev 1.3, printed pp17–20
  26. WoodMaxx manual index: Models 2025 to current
  27. Official current FH-BX62S product page: exact SKU, USD price and conflicting power/weight text
  28. Official FH-BX62S series page: self feed and current-manual link
  29. Current index-linked FH-BX42 & 62 manual, printed p2 / PDF p3
  30. Product-linked older manual, Revision 1-3-2018, p38
  31. Betstco official manual index
  32. Official FM25 public catalog response — active models, gallery and linked documents
  33. Farmry official product specifications
  34. Farmry LFS Series operator manual, Rev 1.7 — Printed pp17–18 specifications; p28 tractor stability
  35. Farmry flail mower comparison table — Net-weight comparison; may exclude PTO shaft
  36. Farmry official product specifications
  37. Farmry official product specifications
  38. TMG TFM60/68/72 manual — cover v.2022.11.29; filename 2025.01.09 — p6 power; p11 hitch adjustment; p12 specifications
  39. Official U.S. TFMS50 page: operating specifications and price
  40. Official FM-54 page: Y option, displayed price, shaft and weight
  41. FM-54 manual for 2025-and-newer models, p40 specifications
  42. Official FM-62H page: hammer option, price, equipment and conflicting weights
  43. Official FM-78H page: hammer option, price, equipment and conflicting weights
  44. Official Betstco FH-EFGC125 product page: exact model, current USD offer, dimensions and conflicting specifications
  45. Currently linked EFGC standard manual, Revision 12-12-17, pp16–23
  46. Official EFGC series: fixed models and separate hydraulic-offset kits
  47. Blue Diamond flail mower page — 35–100 HP line, Category 1 & 2, hydraulic side shift and downloads
  48. Blue Diamond flail mower spec sheet, revised 08.21.25 — heavy-duty 403740 row
  49. Blue Diamond Heavy Duty Flail Mower manual (Feb 2026) — p4 model table, p49 specifications
  50. Official Betstco FH-EF standard-duty series page