John Deere · COMPACT TRACTOR ATTACHMENTS
The 3032E’s documented 25 PTO hp reaches some exact limits: the FM-54 Y-blade mower’s upper end and the MX-9900 chipper’s minimum. A larger machine or a wider cut still needs its own power, rear-load and mounting checks.
By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test
PTO WOOD CHIPPERS FOR THE 3032E
13 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
PTO chipperWoodland Mills
4″ max. chip diameter · 15–30 PTO hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
PTO chipperWoodland Mills
6″ max. chip diameter · 20–50 PTO hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
PTO chipperWoodMaxx
8″ maximum chip diameter, inches · 20 PTO hp minimum; maximum not stated
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperWoodMaxx
9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperWallenstein
5″ max. chip diameter · 30–55 engine hp · current U.S. page (manual table: 40–55 hp for the BX52R)
Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
PTO chipperFarmer-Helper
4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
7 more possible options in the full comparison table — see all.
FLAIL MOWERS FOR THE 3032E
16 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
Flail mowerWoodMaxx
47″ cutting width · 15–25 PTO hp · Y-blades only
Resolve the conflicting published specifications for the exact model revision.
Flail mowerWoodMaxx
55″ cutting width, inches · 24–45 PTO hp · Hammer blades only
Resolve the conflicting published specifications for the exact model revision.
Flail mowerWoodMaxx
55″ cutting width, inches · 24–45 PTO hp · Hammer blades only
Confirm rear remotes, hydraulic flow and pressure requirements.
Flail mowerFarmry
87″ cutting width · 30–85 HP (basis not stated) · official page and manual
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmer-Helper
37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
Flail mowerFarmer-Helper
41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
10 more possible options in the full comparison table — see all.
1475LV U.S. document scope · 2-range HST · 4WD · folding ROPS
U.S. 3032E, base code 1475LV, two-range hydrostatic transmission, 4WD and folding ROPS. Current page and 5 May 2026 U.S.-destination specification book, with qualified lift/hitch data from the currently linked 25-04 brochure. No serial cutoff is verified. Excludes 3033R, 3032E historical/ALDI specification packages not checked here and unverified cab conversions.
Current public data labels 31 hp SAE J1995 and 31 PS with engine 3TNV88C-NJT2; brochure labels 31.1 (22.9 kW) and 3TNV88C-NJT; May 2026 book labels 31.1 (22.3 kW) with HP/PS notation.
Retain the rounded current-page hp label for display. Confirm the exact engine rating and serial-specific documents before a close engine-power decision; do not manufacture a precise conversion.
The linked brochure states 1,356 lb at 24 inches behind center link; the current component omits lift and identifies a different engine suffix. No serial applicability range is established.
Use this only as a qualified brochure reference. Obtain the actual tractor manual, complete implement mass and load center; link-end lift remains unknown.
The web component labels a rear-SCV count of 2; the May 2026 book lists BXX11659 dual rear SCVs as a field-conversion option for MY23 and newer 3E tractors.
Installed rear valves remain unverified. Check the actual tractor and the hydraulic ordering guide; do not assume two factory-standard remotes.
FOLLOW THE NUMBERS
Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.
FROM YOUR TRACTOR TO THE JOB
At 25 PTO hp, the 3032E reaches the FM-54 Y mower’s upper limit and clears the 24-hp minimum for both FM-62 hammer versions. The useful next comparison is fixed versus hydraulic positioning, followed by complete weight and quick-hitch fit—not simply the next model number.
Read the guide →FIELD GUIDEThe 3032E’s 25 PTO hp meets the MX-9900 minimum exactly. It also lies inside WC46 and WC68’s operating ranges, but only clears WC46’s stated full-diameter/full-feed power condition. Those are different levels of evidence for choosing a chipper.
Read the guide →