acreage.EQUIPMENT
Compare0Find equipment

Kubota BX2380 · FLAIL MOWERS

Flail mowers for the Kubota BX2380

On the BX2380, a mower that is slightly wider than the tractor can still leave a tire track outside the cut because its cutting position is asymmetric. Compare the LFS diagrams with the actual tractor, then review complete operating load against the 680 lb lift reference at 24 inches. The documented tractor has 17.7 PTO hp; its 21.6 engine hp cannot clear a PTO-specific 20-hp minimum.

See the best matchesAll BX2380 attachments

By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test

PUT THIS GUIDE TO WORK

Compare mowers for this tractor

See published mismatches and the checks still needed.

Kubota BX2380 compact tractor — representative series photo
Manufacturer photo · Kubota · representative series photo
Flail mowers at work

BEST MATCHES FOR THE BX2380

Flail mowers to shortlist.

6 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Farmer-Helper FH-EF95 flail mowerFlail mower

Farmer-Helper

FH-EF95

37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.

$1,462checked November 14, 2026
Check current price at Farmer-Helper
Fit details
Farmer-Helper FH-EF105 flail mowerFlail mower

Farmer-Helper

FH-EF105

41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.

$1,547checked November 14, 2026
Check current price at Farmer-Helper
Fit details
17 ruled out by published specs

THE DECISION IN NUMBERS

Cutting width and cutting position are different checks

Kubota’s BX2380 brochure gives 45.1 inches of overall width. The differences below are arithmetic references, not measured overlap or fit approval. Farmry’s left/right figures come from the working-width diagram; WoodMaxx’s separate offset figures do not establish the cutting edges.

Scroll the table sideways on smaller screens.

MowerCut versus 45.1-in tractor referencePosition or weight evidenceWhat still needs an answer
Farmry LFS4545.3 in; only 0.2 in wider overallDiagram: 20.4 in left / 24.9 in right; 355 lb with shaftMeasure both tire edges from the hitch centerline; a total-width comparison alone is insufficient
Farmry LFS5353.1 in; 8.0 in wider overallDiagram: 20.4 in left / 32.8 in right; 395 lb with shaftThe extra width is to the right in the depicted position, not evenly added to both sides
FM-54 Y-blades47 in; 1.9 in wider overall15–25 PTO hp; 408 lb manual product weight, inclusions unresolved17.7 is inside the power band; obtain actual cutting-edge locations and complete Y-configuration mass
Sources for this decision table (10)

Widening from LFS45 to LFS53 does not add reach equally

The Rev 1.7 diagram keeps the listed left-side dimension at 20.4 inches while the right-side figure changes from 24.9 to 32.8. Its rounded dimensions should not be treated as an installation drawing for your tractor, but they reveal why total cut width is an incomplete test. Measure each outside tire edge relative to the hitch centerline and ask the seller to locate the cutting edges in the permitted mounting position. LFS53’s larger total width does not, by itself, answer a left-track coverage problem.

A hammer selection can change the power result

FM-54 Y-blades use a 15–25 PTO-hp range, which includes the BX2380’s 17.7. The same manual gives 20–25 for the hammer configuration, which 17.7 does not reach. WoodMaxx also says the equipped blade configurations are not interchangeable. Specify Y-blades on the quote and matching manual rather than assuming the page’s general 15-hp headline covers every option. Farmry’s LFS range remains 15–35 hp without an engine/PTO label; both BX2380 figures are inside the numbers, but the basis still needs confirmation.

Compare the exact mass basis before asking about transport

LFS45 and LFS53 differ by 40 lb on the manual’s shaft-inclusive basis: 355 versus 395. FM-54 lists 408 lb product weight in its manual, while the page gives 410 lb mower-only plus a 39 lb shaft. Those conflicting definitions prevent a clean operating-mass ranking. Kubota’s 680 lb at 24 inches is a lift measurement, not a generic attachment allowance. Obtain the actual load center, ballast requirement and permitted lift travel; do not subtract a mower figure from 680 to claim spare capacity.

Set the cutting-height requirement before accepting the quote

FM-54’s current manual gives a 3/4–3-1/2-inch cutting-height range; the page gives 3/4–2-1/2 inches. That discrepancy matters if the intended finish lies above the page’s upper value. Ask which adjustment range applies to the delivered Y-blade mower. Also have the installer check the rear roller, skids, PTO guards and shaft through the BX’s permitted working and transport positions. Category I identifies the hitch category; it does not settle usable lift height or clearance.

Farmer-Helper FH-EF standard-duty mowers

Farmer-Helper rates its standard-duty FH-EF mowers by PTO power, all to 45 PTO hp with a 45-hp gearbox: the EF95 (37-inch cut) from 15, the EF105 (41-inch) from 16 and the EF125 (48-inch) from 20. They carry Y-blades for grass and light brush. The Kubota BX2380’s 17.7 PTO hp is inside the EF95 / EF105 but short of the EF125’s 20-hp minimum. Its published lift at 24 inches, 680 lb, carries even the 347-lb EF105 with 333 lb to spare. Betstco listed them at $1,462 and $1,547 on November 14, 2026, with the PTO shaft included.

THE SCREEN, WITH ITS LIMITS VISIBLE

Compare each configuration.

No pairing below is manufacturer-confirmed. “Preliminary” still requires implement limits, load center, ballast, hitch geometry and shaft checks.

Initial specification screen only. Scroll the table on small screens. Read the product page for every remaining check.

AttachmentHST · 2 ranges · 4WD17.7 PTO hp
Farmry LFS45 →355 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.
Farmry LFS53 →395 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.
Farmry LFS61 →421 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.
TMG Industrial TMG-TFM60 →650 lb · Product-page operation weight; manual gives conflicting 270 kg (about 595 lb)Published mismatchBoth engine (21.6) and PTO (17.7) horsepower are below the published 30 hp minimum.
Farmry LFP47 →464 lb · 464 lb including PTO shaft on the product page; current Rev 1.3 manual lists 210 kg / 463.7 lb. Shipping weight is a separate 671 lb.Published mismatchBoth engine (21.6) and PTO (17.7) horsepower are below the published 25 hp minimum.
TMG Industrial TFMS50 →660 lb · Product-page operation weight: 660 lb. Manual structure weight: 300 kg (about 661 lb); shaft and fluid inclusion are not explicit. Shipping weight: 770 lb.Published mismatchBoth engine (21.6) and PTO (17.7) horsepower are below the published 30 hp minimum.
WoodMaxx FM-54 · Y-blades →408 lb · Current 2025-and-newer manual p40 lists 408 lb product weight without stating shaft inclusion. Page instead says 410 lb mower-only plus a 39 lb shaft. Do not treat 408 lb as a verified complete operating assembly; confirm delivered Y-blade weight. Shipping page figure is 500 lb.Needs specification reviewResolve the conflicting published specifications for the exact model revision.
WoodMaxx FM-62H · Hammer blades →860 lb · Current 2025-and-newer manual, printed p40 / PDF p41: 860 lb product weight; shaft/oil/packaging inclusion is unstated. Page instead lists 716 lb mower-only plus a 39 lb shaft. Shipping is separately labeled 860 lb. Do not treat the manual number as verified complete operating weight; confirm delivered hammer assembly.Published mismatch17.7 PTO hp is below the 24 hp minimum.
WoodMaxx FM-78H · Hammer blades →968 lb · Current 2025-and-newer manual, printed p40 / PDF p41: 968 lb product weight; shaft/oil/packaging inclusion is unstated. Page instead lists 804 lb mower-only plus a 39 lb shaft. Shipping is separately labeled 1000 lb. Do not treat the manual number as verified complete operating weight; confirm delivered hammer assembly.Published mismatch17.7 PTO hp is below the 30 hp minimum.
WoodMaxx FM-62 · Hammer blades →774 lb · Current 2025-and-newer manual printed p40 / PDF p41 lists 774 lb product weight without shaft/oil/packaging inclusion. Page lists 641 lb mower-only plus a 39 lb shaft; shipping is separately labeled 800 lb. Retain these distinct bases and confirm complete operating weight for the delivered hammer assembly.Published mismatch17.7 PTO hp is below the 24 hp minimum.
WoodMaxx FM-78 · Hammer blades →880 lb · Current 2025-and-newer manual printed p40 / PDF p41 lists 880 lb product weight without shaft/oil/packaging inclusion. Page lists 710 lb mower-only plus a 39 lb shaft; shipping is separately labeled 900 lb. Retain these distinct bases and confirm complete operating weight for the delivered hammer assembly.Published mismatch17.7 PTO hp is below the 30 hp minimum.
Farmer-Helper FH-EFGC125 · Hammer blades →Operating weight unconfirmed · Complete operating weight is unverified. Current page: 576 lb “Weight” and 624 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 600 lb “Weight” and 635 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load.Published mismatch17.7 PTO hp is below the 22 hp minimum.
Farmer-Helper FH-EFGC155 · Hammer blades →Operating weight unconfirmed · Complete operating weight is unverified. Current page: 741 lb “Weight” and 789 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 720 lb “Weight” and 755 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load.Published mismatch17.7 PTO hp is below the 25 hp minimum.
WoodMaxx FM-62 · Y-blades →Operating weight unconfirmed · Complete Y-configuration operating weight is unverified. Current manual p40 gives 774 lb generic product weight without shaft/oil or blade-specific inclusion. Page gives 641 lb mower-only plus 39 lb shaft and separately 800 lb shipping. These bases conflict or lack scope; none substitutes for an assembled Y operating load.Published mismatch17.7 PTO hp is below the 20 hp minimum.
WoodMaxx FM-78 · Y-blades →Operating weight unconfirmed · Complete Y-configuration operating weight is unverified. Current manual p40 gives 880 lb generic product weight without shaft/oil or blade-specific inclusion. Page gives 710 lb mower-only plus 39 lb shaft and separately 900 lb shipping. These bases conflict or lack scope; none substitutes for an assembled Y operating load.Published mismatch17.7 PTO hp is below the 30 hp minimum.
Land Pride FM2560 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 965 lb for the standard unit with a duckfoot rotor; the brochure lists 929 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 222 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load.Published mismatchBoth engine (21.6) and PTO (17.7) horsepower are below the published 33 hp minimum.
Land Pride FM2572 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 1,040 lb for the standard unit with a duckfoot rotor; the brochure lists 1,040 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 261 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load.Published mismatchBoth engine (21.6) and PTO (17.7) horsepower are below the published 42 hp minimum.
Land Pride FM2584 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 1,236 lb for the standard unit with a duckfoot rotor; the brochure lists 1,168 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 301 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load.Published mismatchBoth engine (21.6) and PTO (17.7) horsepower are below the published 49 hp minimum.
Blue Diamond Heavy Duty 403740 →1763 lb · 1,763 lb (800 kg) in the Aug-2025 spec sheet (without PTO) and the Feb-2026 manual p49. Add the PTO shaft for the operating load.Published mismatchBoth engine (21.6) and PTO (17.7) horsepower are below the published 75 hp minimum.
Farmry HFS87 →1299 lb · 1,299 lb (589 kg) including PTO shaft on the product page and in the HFS manual Rev 1.6, printed p17.Published mismatchBoth engine (21.6) and PTO (17.7) horsepower are below the published 30 hp minimum.
Farmer-Helper FH-EF95 →330 lb · 330 lb retained, the heavier of the product page (325 lb) and the FH-EF manual p13 (330 lb); crated 360 lb. Neither says whether the included PTO shaft is counted.Needs specification reviewConfirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.
Farmer-Helper FH-EF105 →347 lb · 347 lb retained, the heavier of the product page (342 lb) and the FH-EF manual p13 (347 lb); crated 377 lb. Neither says whether the included PTO shaft is counted.Needs specification reviewConfirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.
Farmer-Helper FH-EF125 →390 lb · 390 lb retained, the heavier of the product page (390 lb) and the FH-EF manual p13 (383 lb); crated 438 lb. Neither says whether the included PTO shaft is counted.Published mismatch17.7 PTO hp is below the 20 hp minimum.
GO DEEPER

Farmry LFS45 vs LFS53: tire coverage, cutter width and weight

Is the LFS53 worth the extra width over LFS45 for my tractor and access routes?

Read the guide →FIELD GUIDE

Before-you-buy checklist

Take the complete setup, not just a horsepower number, to the manufacturer.

Read the guide →

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Kubota 2026 Full Line Catalog — printed pp 2, 6 and 8; numerical model columns
  2. Kubota current BX brochure — printed p 12 / PDF p 13; BX2380 and BX2680 columns
  3. Kubota current U.S. BX80 series page
  4. Farmry official product specifications
  5. Farmry LFS Series operator manual, Rev 1.7 — Printed pp17–18 specifications; p28 tractor stability
  6. Farmry flail mower comparison table — Net-weight comparison; may exclude PTO shaft
  7. Farmry official product specifications
  8. Official FM-54 page: Y option, displayed price, shaft and weight
  9. FM-54 manual for 2025-and-newer models, p40 specifications
  10. Current manual index: FM-54 under Models 2025 to current
  11. Farmer-Helper FH-EF Series Manual (June 2025)p13 Machine Specs: Min. PTO HP Req. 14–28 by model (EF95 15, EF105 16, EF125 20), CAT I, gearbox 45 HP, working width, weight
  12. Farmer-Helper FH-EF95 official product pageRequires 15–45 PTO horsepower; gearbox 45 HP; 37-in. working width; Cat I; weight; price ($1,462 sale)
  13. Farmer-Helper FH-EF105 official product pageRequires 16–45 PTO horsepower; gearbox 45 HP; 41-in. working width; Cat I; weight; price ($1,547 sale)
  14. Kubota BX80 specification sheet linked by current page — conflicting BX2680 power
  15. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  16. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  17. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  18. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  19. Farmry official product specifications
  20. TMG Industrial official U.S. TFM60 product page — Current price, operation weight, width and shipping weight
  21. TMG TFM60/68/72 manual — cover v.2022.11.29; filename 2025.01.09 — p6 power; p11 hitch adjustment; p12 specifications
  22. Official LFP47 product page: configuration, weight and price
  23. LFP Series operator manual, Rev 1.3, printed pp17–20
  24. Official U.S. TFMS50 page: operating specifications and price
  25. TMG TFMS50/60/72 manual, 2025-01-09, pp6, 10, 14–15, 19–20
  26. Official FM-62H page: hammer option, price, equipment and conflicting weights
  27. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41 specifications
  28. Official FM-78H page: hammer option, price, equipment and conflicting weights
  29. Official FM-62 page: exact hammer variant, price and equipment
  30. Official FM-78 page: exact hammer variant, price and equipment
  31. Official Betstco FH-EFGC125 product page: exact model, current USD offer, dimensions and conflicting specifications
  32. Currently linked EFGC standard manual, Revision 12-12-17, pp16–23
  33. Official EFGC series: fixed models and separate hydraulic-offset kits
  34. Official Betstco manual index
  35. Official Betstco FH-EFGC155 product page: exact model, current USD offer, dimensions and conflicting specifications
  36. Land Pride FM25 current North American family and model listing
  37. Official FM25 public catalog response — active models, gallery and linked documents
  38. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  39. Official FM25 brochure — printed p12 model table
  40. Blue Diamond flail mower page — 35–100 HP line, Category 1 & 2, hydraulic side shift and downloads
  41. Blue Diamond flail mower spec sheet, revised 08.21.25 — heavy-duty 403740 row
  42. Blue Diamond Heavy Duty Flail Mower manual (Feb 2026) — p4 model table, p49 specifications
  43. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  44. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications
  45. Official Betstco FH-EF standard-duty series page
  46. Official Betstco FH-EF125 product page — PTO hp range, gearbox, widths, weights, blades and price