acreage.EQUIPMENT
Compare0Find equipment

Kubota BX2680 · FLAIL MOWERS

Flail mowers for the Kubota BX2680

The BX2680 has two published power sets, but neither supports the TMG-TFM60’s 30 hp minimum. The useful next step is to resolve Farmry’s horsepower basis, then compare LFS cutting width with the actual tire track and the BX’s unchanged 680 lb at-24-inch hitch figure.

See the best matchesAll BX2680 attachments

By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test

PUT THIS GUIDE TO WORK

Compare mowers for this tractor

See published mismatches and the checks still needed.

Kubota BX2680 compact tractor — representative series photo
Manufacturer photo · Kubota · representative series photo
Flail mowers at work

BEST MATCHES FOR THE BX2680

Flail mowers to shortlist.

6 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Farmer-Helper FH-EF95 flail mowerFlail mower

Farmer-Helper

FH-EF95

37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,462checked November 14, 2026
Check current price at Farmer-Helper
Fit details
Farmer-Helper FH-EF105 flail mowerFlail mower

Farmer-Helper

FH-EF105

41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,547checked November 14, 2026
Check current price at Farmer-Helper
Fit details
17 ruled out by published specs

THE DECISION IN NUMBERS

Compare the cut with your actual tire width

Kubota’s nominal minimum-tread width is 45.1 inches. These are total width differences, not overlap on each side or proof of usable coverage. Measure your tires and check power, material and implement limits.

Scroll the table sideways on smaller screens.

MowerPublished cutDifference from 45.1-inch nominal tractor widthListed weight with shaft
LFS4545.3 inches0.2 inch total355 lb
LFS5353.1 inches8.0 inches total395 lb
LFS6161.0 inches15.9 inches total421 lb

The source discrepancy does not change the TMG exclusion

Current Kubota material gives 23.3 gross / 19.2 PTO hp; the linked sheet gives 24.8 / 19.5. TMG’s 30–60 hp label does not identify the power basis, but all four Kubota values remain below 30. Choosing the older number cannot establish a fit.

The 45-inch option leaves little nominal overlap

Kubota publishes 45.1 inches of overall width at minimum tread for BX2680. LFS45 cuts 45.3 inches, a difference of only 0.2 inch in the nominal figures. Tire package, wheel setting and real working overlap matter more than that paper margin. LFS53’s 53.1-inch cut may address track coverage, but the wider cut also feeds more vegetation into a limited PTO-power budget.

More PTO power than BX2380 does not buy more rear lift

Both BX models have the same published 680 lb lift figure at 24 inches. LFS45, LFS53 and LFS61 are listed at 355, 395 and 421 lb including the shaft in the manual. Those are comparison inputs, not carrying approvals. Confirm the tractor’s implement limits and ballast, and have Farmry define whether its 15–35 hp range means engine or PTO power before choosing a width.

Farmer-Helper FH-EF standard-duty mowers

Farmer-Helper rates its standard-duty FH-EF mowers by PTO power, all to 45 PTO hp with a 45-hp gearbox: the EF95 (37-inch cut) from 15, the EF105 (41-inch) from 16 and the EF125 (48-inch) from 20. They carry Y-blades for grass and light brush. The Kubota BX2680’s 19.2 PTO hp is inside the EF95 / EF105 but short of the EF125’s 20-hp minimum. Its published lift at 24 inches, 680 lb, carries even the 347-lb EF105 with 333 lb to spare. Betstco listed them at $1,462 and $1,547 on November 14, 2026, with the PTO shaft included.

THE SCREEN, WITH ITS LIMITS VISIBLE

Compare each configuration.

No pairing below is manufacturer-confirmed. “Preliminary” still requires implement limits, load center, ballast, hitch geometry and shaft checks.

Initial specification screen only. Scroll the table on small screens. Read the product page for every remaining check.

AttachmentHST · 2 ranges · 4WD19.2 PTO hp
Farmry LFS45 →355 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.
Farmry LFS53 →395 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.
Farmry LFS61 →421 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power.
TMG Industrial TMG-TFM60 →650 lb · Product-page operation weight; manual gives conflicting 270 kg (about 595 lb)Published mismatchBoth engine (23.3) and PTO (19.2) horsepower are below the published 30 hp minimum.
Farmry LFP47 →464 lb · 464 lb including PTO shaft on the product page; current Rev 1.3 manual lists 210 kg / 463.7 lb. Shipping weight is a separate 671 lb.Published mismatchBoth engine (23.3) and PTO (19.2) horsepower are below the published 25 hp minimum.
TMG Industrial TFMS50 →660 lb · Product-page operation weight: 660 lb. Manual structure weight: 300 kg (about 661 lb); shaft and fluid inclusion are not explicit. Shipping weight: 770 lb.Published mismatchBoth engine (23.3) and PTO (19.2) horsepower are below the published 30 hp minimum.
WoodMaxx FM-54 · Y-blades →408 lb · Current 2025-and-newer manual p40 lists 408 lb product weight without stating shaft inclusion. Page instead says 410 lb mower-only plus a 39 lb shaft. Do not treat 408 lb as a verified complete operating assembly; confirm delivered Y-blade weight. Shipping page figure is 500 lb.Needs specification reviewResolve the conflicting published specifications for the exact model revision.
WoodMaxx FM-62H · Hammer blades →860 lb · Current 2025-and-newer manual, printed p40 / PDF p41: 860 lb product weight; shaft/oil/packaging inclusion is unstated. Page instead lists 716 lb mower-only plus a 39 lb shaft. Shipping is separately labeled 860 lb. Do not treat the manual number as verified complete operating weight; confirm delivered hammer assembly.Published mismatch19.2 PTO hp is below the 24 hp minimum.
WoodMaxx FM-78H · Hammer blades →968 lb · Current 2025-and-newer manual, printed p40 / PDF p41: 968 lb product weight; shaft/oil/packaging inclusion is unstated. Page instead lists 804 lb mower-only plus a 39 lb shaft. Shipping is separately labeled 1000 lb. Do not treat the manual number as verified complete operating weight; confirm delivered hammer assembly.Published mismatch19.2 PTO hp is below the 30 hp minimum.
WoodMaxx FM-62 · Hammer blades →774 lb · Current 2025-and-newer manual printed p40 / PDF p41 lists 774 lb product weight without shaft/oil/packaging inclusion. Page lists 641 lb mower-only plus a 39 lb shaft; shipping is separately labeled 800 lb. Retain these distinct bases and confirm complete operating weight for the delivered hammer assembly.Published mismatch19.2 PTO hp is below the 24 hp minimum.
WoodMaxx FM-78 · Hammer blades →880 lb · Current 2025-and-newer manual printed p40 / PDF p41 lists 880 lb product weight without shaft/oil/packaging inclusion. Page lists 710 lb mower-only plus a 39 lb shaft; shipping is separately labeled 900 lb. Retain these distinct bases and confirm complete operating weight for the delivered hammer assembly.Published mismatch19.2 PTO hp is below the 30 hp minimum.
Farmer-Helper FH-EFGC125 · Hammer blades →Operating weight unconfirmed · Complete operating weight is unverified. Current page: 576 lb “Weight” and 624 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 600 lb “Weight” and 635 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load.Published mismatch19.2 PTO hp is below the 22 hp minimum.
Farmer-Helper FH-EFGC155 · Hammer blades →Operating weight unconfirmed · Complete operating weight is unverified. Current page: 741 lb “Weight” and 789 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 720 lb “Weight” and 755 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load.Published mismatch19.2 PTO hp is below the 25 hp minimum.
WoodMaxx FM-62 · Y-blades →Operating weight unconfirmed · Complete Y-configuration operating weight is unverified. Current manual p40 gives 774 lb generic product weight without shaft/oil or blade-specific inclusion. Page gives 641 lb mower-only plus 39 lb shaft and separately 800 lb shipping. These bases conflict or lack scope; none substitutes for an assembled Y operating load.Published mismatch19.2 PTO hp is below the 20 hp minimum.
WoodMaxx FM-78 · Y-blades →Operating weight unconfirmed · Complete Y-configuration operating weight is unverified. Current manual p40 gives 880 lb generic product weight without shaft/oil or blade-specific inclusion. Page gives 710 lb mower-only plus 39 lb shaft and separately 900 lb shipping. These bases conflict or lack scope; none substitutes for an assembled Y operating load.Published mismatch19.2 PTO hp is below the 30 hp minimum.
Land Pride FM2560 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 965 lb for the standard unit with a duckfoot rotor; the brochure lists 929 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 222 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load.Published mismatchBoth engine (23.3) and PTO (19.2) horsepower are below the published 33 hp minimum.
Land Pride FM2572 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 1,040 lb for the standard unit with a duckfoot rotor; the brochure lists 1,040 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 261 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load.Published mismatchBoth engine (23.3) and PTO (19.2) horsepower are below the published 42 hp minimum.
Land Pride FM2584 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 1,236 lb for the standard unit with a duckfoot rotor; the brochure lists 1,168 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 301 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load.Published mismatchBoth engine (23.3) and PTO (19.2) horsepower are below the published 49 hp minimum.
Blue Diamond Heavy Duty 403740 →1763 lb · 1,763 lb (800 kg) in the Aug-2025 spec sheet (without PTO) and the Feb-2026 manual p49. Add the PTO shaft for the operating load.Published mismatchBoth engine (23.3) and PTO (19.2) horsepower are below the published 75 hp minimum.
Farmry HFS87 →1299 lb · 1,299 lb (589 kg) including PTO shaft on the product page and in the HFS manual Rev 1.6, printed p17.Published mismatchBoth engine (23.3) and PTO (19.2) horsepower are below the published 30 hp minimum.
Farmer-Helper FH-EF95 →330 lb · 330 lb retained, the heavier of the product page (325 lb) and the FH-EF manual p13 (330 lb); crated 360 lb. Neither says whether the included PTO shaft is counted.Needs specification reviewConfirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
Farmer-Helper FH-EF105 →347 lb · 347 lb retained, the heavier of the product page (342 lb) and the FH-EF manual p13 (347 lb); crated 377 lb. Neither says whether the included PTO shaft is counted.Needs specification reviewConfirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
Farmer-Helper FH-EF125 →390 lb · 390 lb retained, the heavier of the product page (390 lb) and the FH-EF manual p13 (383 lb); crated 438 lb. Neither says whether the included PTO shaft is counted.Published mismatch19.2 PTO hp is below the 20 hp minimum.
GO DEEPER

Farmry LFS45 vs LFS53: tire coverage, cutter width and weight

Is the LFS53 worth the extra width over LFS45 for my tractor and access routes?

Read the guide →FIELD GUIDE

Before-you-buy checklist

Take the complete setup, not just a horsepower number, to the manufacturer.

Read the guide →

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Kubota 2026 Full Line Catalog — printed pp2 and 6
  2. Kubota BX80 Series current U.S. page
  3. Kubota BX Series brochure linked by current U.S. page — printed p12
  4. Kubota BX80 specification sheet linked by current page — conflicting BX2680 power
  5. Farmer-Helper FH-EF Series Manual (June 2025)p13 Machine Specs: Min. PTO HP Req. 14–28 by model (EF95 15, EF105 16, EF125 20), CAT I, gearbox 45 HP, working width, weight
  6. Farmer-Helper FH-EF95 official product pageRequires 15–45 PTO horsepower; gearbox 45 HP; 37-in. working width; Cat I; weight; price ($1,462 sale)
  7. Farmer-Helper FH-EF105 official product pageRequires 16–45 PTO horsepower; gearbox 45 HP; 41-in. working width; Cat I; weight; price ($1,547 sale)
  8. Kubota BX80 U.S. brochure, October 2017 print reference
  9. Farmry official product specifications
  10. Farmry LFS Series operator manual, Rev 1.7 — Printed pp17–18 specifications; p28 tractor stability
  11. Farmry flail mower comparison table — Net-weight comparison; may exclude PTO shaft
  12. Farmry official product specifications
  13. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  14. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  15. TMG Industrial official U.S. TFM60 product page — Current price, operation weight, width and shipping weight
  16. TMG TFM60/68/72 manual — cover v.2022.11.29; filename 2025.01.09 — p6 power; p11 hitch adjustment; p12 specifications
  17. Official Betstco FH-EF standard-duty series page
  18. Farmry official product specifications
  19. Official LFP47 product page: configuration, weight and price
  20. LFP Series operator manual, Rev 1.3, printed pp17–20
  21. Official U.S. TFMS50 page: operating specifications and price
  22. TMG TFMS50/60/72 manual, 2025-01-09, pp6, 10, 14–15, 19–20
  23. Official FM-54 page: Y option, displayed price, shaft and weight
  24. FM-54 manual for 2025-and-newer models, p40 specifications
  25. Current manual index: FM-54 under Models 2025 to current
  26. Official FM-62H page: hammer option, price, equipment and conflicting weights
  27. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41 specifications
  28. Official FM-78H page: hammer option, price, equipment and conflicting weights
  29. Official FM-62 page: exact hammer variant, price and equipment
  30. Official FM-78 page: exact hammer variant, price and equipment
  31. Official Betstco FH-EFGC125 product page: exact model, current USD offer, dimensions and conflicting specifications
  32. Currently linked EFGC standard manual, Revision 12-12-17, pp16–23
  33. Official EFGC series: fixed models and separate hydraulic-offset kits
  34. Official Betstco manual index
  35. Official Betstco FH-EFGC155 product page: exact model, current USD offer, dimensions and conflicting specifications
  36. Land Pride FM25 current North American family and model listing
  37. Official FM25 public catalog response — active models, gallery and linked documents
  38. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  39. Official FM25 brochure — printed p12 model table
  40. Blue Diamond flail mower page — 35–100 HP line, Category 1 & 2, hydraulic side shift and downloads
  41. Blue Diamond flail mower spec sheet, revised 08.21.25 — heavy-duty 403740 row
  42. Blue Diamond Heavy Duty Flail Mower manual (Feb 2026) — p4 model table, p49 specifications
  43. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  44. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications
  45. Official Betstco FH-EF125 product page — PTO hp range, gearbox, widths, weights, blades and price