The L6070 Premium’s 53 PTO hp exceeds the FM-62 hammer family’s 45 hp ceiling and TMG’s retained 50 PTO-hp manual limit. The FM-78 hammer models publish 30–65 PTO hp, so the useful next decision is a fixed 70-inch cut versus powered side shift, with different load and hydraulic requirements.
70″ cutting width, inches · 30–65 PTO hp · Hammer blades only
Possible — confirm details
Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
70″ cutting width, inches · 30–65 PTO hp · Hammer blades only
Possible — confirm details
Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
87″ cutting width · 30–85 HP (basis not stated) · official page and manual
Possible — confirm details
Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
48″ cutting width, inches · 22–65 PTO hp on current page; linked-manual basis/limit conflicts
Possible — confirm details
Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
60″ cutting width, inches · 25–65 PTO hp on current page; linked-manual basis/limit conflicts
Possible — confirm details
Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
70″ cutting width, inches · 30–65 PTO hp · Y-blades only
Possible — confirm details
Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
L6070 Premium: narrow the power range, then choose offset equipment
WoodMaxx rows are hammer configurations only. Manual product weights have unresolved operating inclusions and conflict with page weights; in-range power is not a fit approval.
Scroll the table sideways on smaller screens.
Mower
PTO power screen at 53 hp
Cut / manual product weight
Hydraulic consequence
FM-62 / FM-62H hammer
24–45 hp: 8 hp above maximum
55 in / 774 or 860 lb
Neither enters the power shortlist
TMG-TFM60 / TFMS50
Retained manual maximum 50 hp: 3 hp above
Do not choose by width before resolving this exclusion
Side-shift equipment cannot override the ceiling
FM-78 hammer
30–65 hp: inside published range
70 in / 880 lb
Fixed offset; no remote circuit for offset adjustment
The smaller hammer mower has a maximum, not only a minimum
Both fixed FM-62 and hydraulic-offset FM-62H publish a 24–45 PTO-hp range for hammers. At 53 PTO hp the L6070 exceeds it by 8 hp. Likewise, the retained TMG manuals impose a 50 PTO-hp maximum despite broader generic horsepower labels. Do not turn a mower’s smaller cutting width into an assumption that it accepts any larger tractor.
The fixed 70-inch option removes a specific hydraulic requirement
FM-78 and FM-78H have the same published 70-inch cutting width and 30–65 PTO-hp hammer range. The current manual lists 880 and 968 lb respectively, an 88 lb difference on that same published basis. The fixed model needs no rear-remote connection for offset adjustment; the H version does. Confirm complete operating weight because the page’s mower-only weights differ from the manual.
Cold-climate cab equipment cannot be assumed on every Premium
Kubota lists 3 optional rear remotes in the catalog and separately describes 2 factory-installed remotes on the Premium Cold Climate cab package. Inspect the actual tractor before considering FM-78H. The 9.83 gpm pump figure is not a verified rear-coupler supply specification, and the mower’s required flow, pressure and valve arrangement remain unconfirmed.
Width and Category 2 still need dimensioned checks
The catalog’s 67.3-inch minimum-tread tractor width is only a starting point for measuring actual tire coverage by a 70-inch mower. Published offset dimensions do not establish cutting-edge reach. Both sides of the FM-78 pairing document Category 1 / 2 capability, but delivered bushings, hitch revision, quick-hitch fit, PTO geometry and complete rear load still need approval.
Farmry HFS87: 87-inch cut, Category I and II
Farmry rates the HFS87 at 30–85 hp without saying whether that is PTO or engine power, lists Category I and II, cuts 87 inches and weighs 1,299 lb with the shaft. The Kubota L6070 Premium’s 53 PTO hp and 60 engine hp are both inside that range, so the basis does not change the result. Its published lift at 24 inches, 2,976 lb, carries that weight with 1,677 lb to spare; check front ballast all the same. Farmry rates the gearbox at only 50 hp, below this tractor’s 53 PTO hp; ask Farmry how hard it can be driven. The 87-inch cut is 3 inches wider than Land Pride’s FM2584. Farmry’s page listed it at $4,499 on November 14, 2026.
THE SCREEN, WITH ITS LIMITS VISIBLE
Compare each configuration.
No pairing below is manufacturer-confirmed. “Preliminary” still requires implement limits, load center, ballast, hitch geometry and shaft checks.
Initial specification screen only. Scroll the table on small screens. Read the product page for every remaining check.
Attachment
L6070PRM · HST Plus · 3 ranges · 4WD · ROPS/Cab53 PTO hp
Farmry LFS45 →355 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18
Published mismatchBoth engine (60) and PTO (53) horsepower exceed the published 35 hp maximum.
Farmry LFS53 →395 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18
Published mismatchBoth engine (60) and PTO (53) horsepower exceed the published 35 hp maximum.
Farmry LFS61 →421 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18
Published mismatchBoth engine (60) and PTO (53) horsepower exceed the published 35 hp maximum.
Published mismatch53 PTO hp exceeds the manual’s 50 PTO hp maximum.
Farmry LFP47 →464 lb · 464 lb including PTO shaft on the product page; current Rev 1.3 manual lists 210 kg / 463.7 lb. Shipping weight is a separate 671 lb.
Published mismatchBoth engine (60) and PTO (53) horsepower exceed the published 45 hp maximum.
TMG Industrial TFMS50 →660 lb · Product-page operation weight: 660 lb. Manual structure weight: 300 kg (about 661 lb); shaft and fluid inclusion are not explicit. Shipping weight: 770 lb.
Published mismatch53 PTO hp exceeds the manual’s 50 PTO hp maximum.
WoodMaxx FM-54 · Y-blades →408 lb · Current 2025-and-newer manual p40 lists 408 lb product weight without stating shaft inclusion. Page instead says 410 lb mower-only plus a 39 lb shaft. Do not treat 408 lb as a verified complete operating assembly; confirm delivered Y-blade weight. Shipping page figure is 500 lb.
Published mismatch53 PTO hp exceeds the published 25 hp range.
WoodMaxx FM-62H · Hammer blades →860 lb · Current 2025-and-newer manual, printed p40 / PDF p41: 860 lb product weight; shaft/oil/packaging inclusion is unstated. Page instead lists 716 lb mower-only plus a 39 lb shaft. Shipping is separately labeled 860 lb. Do not treat the manual number as verified complete operating weight; confirm delivered hammer assembly.
Published mismatch53 PTO hp exceeds the published 45 hp range.
WoodMaxx FM-78H · Hammer blades →968 lb · Current 2025-and-newer manual, printed p40 / PDF p41: 968 lb product weight; shaft/oil/packaging inclusion is unstated. Page instead lists 804 lb mower-only plus a 39 lb shaft. Shipping is separately labeled 1000 lb. Do not treat the manual number as verified complete operating weight; confirm delivered hammer assembly.
Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
WoodMaxx FM-62 · Hammer blades →774 lb · Current 2025-and-newer manual printed p40 / PDF p41 lists 774 lb product weight without shaft/oil/packaging inclusion. Page lists 641 lb mower-only plus a 39 lb shaft; shipping is separately labeled 800 lb. Retain these distinct bases and confirm complete operating weight for the delivered hammer assembly.
Published mismatch53 PTO hp exceeds the published 45 hp range.
WoodMaxx FM-78 · Hammer blades →880 lb · Current 2025-and-newer manual printed p40 / PDF p41 lists 880 lb product weight without shaft/oil/packaging inclusion. Page lists 710 lb mower-only plus a 39 lb shaft; shipping is separately labeled 900 lb. Retain these distinct bases and confirm complete operating weight for the delivered hammer assembly.
Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
Farmer-Helper FH-EFGC125 · Hammer blades →Operating weight unconfirmed · Complete operating weight is unverified. Current page: 576 lb “Weight” and 624 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 600 lb “Weight” and 635 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load.
Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
Farmer-Helper FH-EFGC155 · Hammer blades →Operating weight unconfirmed · Complete operating weight is unverified. Current page: 741 lb “Weight” and 789 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 720 lb “Weight” and 755 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load.
Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
WoodMaxx FM-62 · Y-blades →Operating weight unconfirmed · Complete Y-configuration operating weight is unverified. Current manual p40 gives 774 lb generic product weight without shaft/oil or blade-specific inclusion. Page gives 641 lb mower-only plus 39 lb shaft and separately 800 lb shipping. These bases conflict or lack scope; none substitutes for an assembled Y operating load.
Published mismatch53 PTO hp exceeds the published 45 hp range.
WoodMaxx FM-78 · Y-blades →Operating weight unconfirmed · Complete Y-configuration operating weight is unverified. Current manual p40 gives 880 lb generic product weight without shaft/oil or blade-specific inclusion. Page gives 710 lb mower-only plus 39 lb shaft and separately 900 lb shipping. These bases conflict or lack scope; none substitutes for an assembled Y operating load.
Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
Land Pride FM2560 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 965 lb for the standard unit with a duckfoot rotor; the brochure lists 929 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 222 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load.
Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
Land Pride FM2572 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 1,040 lb for the standard unit with a duckfoot rotor; the brochure lists 1,040 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 261 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load.
Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
Land Pride FM2584 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 1,236 lb for the standard unit with a duckfoot rotor; the brochure lists 1,168 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 301 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load.
Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
Blue Diamond Heavy Duty 403740 →1763 lb · 1,763 lb (800 kg) in the Aug-2025 spec sheet (without PTO) and the Feb-2026 manual p49. Add the PTO shaft for the operating load.
Published mismatchBoth engine (60) and PTO (53) horsepower are below the published 75 hp minimum.
Farmry HFS87 →1299 lb · 1,299 lb (589 kg) including PTO shaft on the product page and in the HFS manual Rev 1.6, printed p17.
Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
Farmer-Helper FH-EF95 →330 lb · 330 lb retained, the heavier of the product page (325 lb) and the FH-EF manual p13 (330 lb); crated 360 lb. Neither says whether the included PTO shaft is counted.
Published mismatch53 PTO hp exceeds the published 45 hp range.
Farmer-Helper FH-EF105 →347 lb · 347 lb retained, the heavier of the product page (342 lb) and the FH-EF manual p13 (347 lb); crated 377 lb. Neither says whether the included PTO shaft is counted.
Published mismatch53 PTO hp exceeds the published 45 hp range.
Farmer-Helper FH-EF125 →390 lb · 390 lb retained, the heavier of the product page (390 lb) and the FH-EF manual p13 (383 lb); crated 438 lb. Neither says whether the included PTO shaft is counted.
Published mismatch53 PTO hp exceeds the published 45 hp range.