acreage.EQUIPMENT
Compare0Find equipment

Kubota · COMPACT TRACTOR ATTACHMENTS

Kubota LX3520
Attachments that fit.

This LX3520 guide covers the standard-width HSD ROPS tractor with 28.7 PTO hp. Its web-model lift field conflicts with Kubota’s detailed documents: the supported at-24-inch figure is 1,962 lb, while 2,535 lb is measured at the lift point. Use the correct configuration and load basis before comparing attachments.

28.7PTO hp34.9engine hp1hitch category1,962lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test

Kubota LX3520 compact tractor — representative series photo
Manufacturer photo · Kubota · representative series photo

PTO WOOD CHIPPERS FOR THE LX3520

Chippers that fit the LX3520.

13 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full chipper guide
Wallenstein BX52RI PTO wood chipperPTO chipper

Wallenstein

BX52RI

5″ max. chip diameter · 30–55 engine hp · current U.S. page (manual table: 40–55 hp for the BX52R)

Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
Farmer-Helper FH-BX42 PTO wood chipperPTO chipper

Farmer-Helper

FH-BX42

4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$1,683checked November 7, 2026
Check current price at Farmer-Helper
Fit details

7 more possible options in the full comparison table — see all.

6 ruled out by published specs

FLAIL MOWERS FOR THE LX3520

Flail mowers that fit the LX3520.

16 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmry HFS87 flail mowerFlail mower

Farmry

HFS87

87″ cutting width · 30–85 HP (basis not stated) · official page and manual

Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$4,499checked November 14, 2026
Check current price at Farmry
Fit details
Farmer-Helper FH-EF95 flail mowerFlail mower

Farmer-Helper

FH-EF95

37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,462checked November 14, 2026
Check current price at Farmer-Helper
Fit details
Farmer-Helper FH-EF105 flail mowerFlail mower

Farmer-Helper

FH-EF105

41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,547checked November 14, 2026
Check current price at Farmer-Helper
Fit details

10 more possible options in the full comparison table — see all.

7 ruled out by published specs
Scope of this guideHSD · standard width · 3-range HST · 4WD · ROPS. Each configuration below states the model and equipment covered by its sources.

Keep the HSD power figure and the correct lift measurement together.

  • MX-9900 starts at 25 PTO hp, while WC88 starts at 35; the larger listed maximum chip diameter does not imply a larger operating-power minimum across brands.
  • FM-54 Y-blade’s 25 hp maximum and FM-78 hammer’s 30 hp minimum leave FM-62 hammer’s 24–45 range as a distinct middle option to investigate.
  • 9.5 gpm is total pump output; it does not establish an installed side-shift circuit.

Choose the exact configuration.

HSD · standard width · 3-range HST · 4WD · ROPS

28.7 PTO hp

U.S. LX3520HSD, standard-width 4WD ROPS with three-range hydrostatic transmission. Exact HSD specification column only; excludes LX3520DTN narrow gear tractor, HSDC/SUHSDC cab variants, LX3310 and LX4020. Confirm serial-specific operator-manual applicability before ordering an attachment.

Engine power
34.9 hp · Gross engine power under SAE J1995, exact LX3520HSD column in current-linked U.S. brochure and 2026 catalog.
Rear hitch
Category I
Lift at 24 inches
1,962 lb · 24 inches behind lift point; separate from the 2,535 lb rating at lift point
Lift at link ends
2,535 lb
Hydraulics
9.5 gpm total pump output, open-center dual-pump system. Implement/steering split and actual rear-coupler delivery are not established in the reviewed sources.
Pressure
Not confirmed in the reviewed official U.S. page and specification documents.
Find attachments for this tractor

Where the documents disagree.

Lift at 24 inches

Current exact LX3520 web-model field says 3-Point Hitch Capacity 24in behind = 2535. Current-linked detailed brochure and sheet give 2535 at lift point and 1962 at 24 in; 2026 catalog also gives 1962 at 24 in.

Use 1,962 lb for lift24 and 2,535 lb for liftEnds, preserve the web-label conflict, and require serial/load-center confirmation for the actual implement.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Kubota current U.S. LX page — exact LX3520 model specifications
  2. Kubota current-linked LX20 brochure — printed pp 14–15 / PDF pp 16–17
  3. Kubota current-linked LX20 specification sheet — printed pp 14–15 on PDF p 1
  4. Kubota 2026 U.S. full-line catalog — printed p 8 / PDF p 10
  5. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  6. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  7. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  8. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  9. TMG Industrial official U.S. TFM60 product page — Current price, operation weight, width and shipping weight
  10. TMG TFM60/68/72 manual — cover v.2022.11.29; filename 2025.01.09 — p6 power; p11 hitch adjustment; p12 specifications
  11. Official U.S. WC88 page: price, capacity and drive system
  12. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  13. Official FM-54 page: Y option, displayed price, shaft and weight
  14. FM-54 manual for 2025-and-newer models, p40 specifications
  15. Current manual index: FM-54 under Models 2025 to current
  16. Official FM-62H page: hammer option, price, equipment and conflicting weights
  17. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41 specifications
  18. Official FM-62 page: exact hammer variant, price and equipment
  19. Official FM-78 page: exact hammer variant, price and equipment
  20. Official MX-9900 page: power/capacity claims, feed, hitch and current sale price
  21. MX-9900 manual Rev C, September 18, 2026: specifications and setup

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

PTO wood chippers for the Kubota LX3520

The LX3520HSD’s 28.7 PTO hp clears MX-9900’s 25 hp operating minimum but not WC88’s 35 hp minimum, despite the MX model’s larger listed maximum chip diameter. This is a useful reminder that nominal diameter does not determine the tractor requirement across different chipper designs.

Read the guide →FIELD GUIDE

Flail mowers for the Kubota LX3520

The LX3520HSD sits between two WoodMaxx mower boundaries: 28.7 PTO hp exceeds FM-54 Y-blade’s 25 hp maximum but is below FM-78 hammer’s 30 hp minimum. FM-62 hammer’s 55-inch cut falls in the middle, with fixed and hydraulic-offset versions that require different equipment and load checks.

Read the guide →