PTO chipperWoodland Mills
WC68
6″ max. chip diameter · 20–50 PTO hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
LS · COMPACT TRACTOR ATTACHMENTS
The LS MT232E pairs a 31.7-hp Yanmar engine with 28.5 PTO hp (gear) or 26.2 (MT232HE hydrostatic), and the same 1,433-lb lift at 24 inches as the smaller MT226E. Both versions sit between WoodMaxx’s FM-54 Y ceiling (25) and its FM-78 floor (30), which makes the FM-62 family the WoodMaxx flail that fits.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

PTO WOOD CHIPPERS FOR THE MT232E
13 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. “Specs line up” cards come first.
PTO chipperWoodland Mills
6″ max. chip diameter · 20–50 PTO hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
PTO chipperFarmry
5″ max. chip diameter · 15–45 engine hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
PTO chipperWoodland Mills
4″ max. chip diameter · 15–30 PTO hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
PTO chipperWoodMaxx
9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperFarmer-Helper
6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperFarmer-Helper
4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
7 more possible options in the full comparison table.
FLAIL MOWERS FOR THE MT232E
15 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.
Flail mowerWoodMaxx
55″ cutting width, inches · 24–45 PTO hp · Hammer blades only
Resolve the conflicting published specifications for the exact model revision.
Flail mowerWoodMaxx
55″ cutting width, inches · 24–45 PTO hp · Hammer blades only
Confirm rear remotes, hydraulic flow and pressure requirements.
Flail mowerWoodMaxx
55″ cutting width, inches · 20–45 PTO hp · Y-blades only
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
Flail mowerFarmer-Helper
48″ cutting width, inches · 22–65 PTO hp on current page; linked-manual basis/limit conflicts
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
Flail mowerFarmer-Helper
60″ cutting width, inches · 25–65 PTO hp on current page; linked-manual basis/limit conflicts
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
Flail mowerFarmry
47.2″ cutting width, inches · 25–45 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
9 more possible options in the full comparison table — see all.
U.S. MT232E · 12F/12R synchro shuttle · 4WD · ROPS · independent PTO
Current U.S. LS MT232E gear tractor with ROPS, from the 2026 specification sheet, current page and the MT232/MT242 owner manual.
U.S. MT232HE · 3-range HST · 4WD · ROPS · independent PTO
Current U.S. LS MT232HE hydrostatic tractor with ROPS. 3,210 lb without ballast on the current page.
The current MT232E page lists 3,166 lb without ballast; the owner manual lists 3,254 lb for the roll-bar model.
Weight is shown for reference only; it does not change an attachment screen here.
FOLLOW THE NUMBERS
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.
FROM YOUR TRACTOR TO THE JOB