Massey Ferguson · COMPACT TRACTOR ATTACHMENTS

Massey Ferguson 1835E
Attachments that fit.

This 1835E profile uses the three-range HST entry in Massey Ferguson’s U.S. 1800E brochures: 27.6 PTO hp and 34.5 rated engine hp. It also preserves the brochure’s transmission-driven PTO label. Current 1E successors and the 29.2-PTO-hp mechanical 1835E are separate configurations.

27.6PTO hp34.5engine hp1hitch category1,598lb lift at 24 in.

By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test

Massey Ferguson 1835E compact tractor — representative series photo
Manufacturer photo · Massey Ferguson · representative series photo

PTO WOOD CHIPPERS FOR THE 1835E

Chippers that fit the 1835E.

13 of 19 pto wood chippers we track pass the published power, hitch and speed screen. “Specs line up” cards come first.

Full chipper guide
Wallenstein BX52S PTO wood chipperPTO chipper

Wallenstein

BX52S

5″ max. chip diameter · 22–55 engine hp · official U.S. page

Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Wallenstein BX52RI PTO wood chipperPTO chipper

Wallenstein

BX52RI

5″ max. chip diameter · 30–55 engine hp · current U.S. page (manual table: 40–55 hp for the BX52R)

Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein

7 more possible options in the full comparison table — see all.

6 ruled out by published specs

FLAIL MOWERS FOR THE 1835E

Flail mowers that fit the 1835E.

16 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmry HFS87 flail mowerFlail mower

Farmry

HFS87

87″ cutting width · 30–85 HP (basis not stated) · official page and manual

Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$4,499checked November 14, 2026
Check current price at Farmry
Farmer-Helper FH-EF95 flail mowerFlail mower

Farmer-Helper

FH-EF95

37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.

$1,462checked November 14, 2026
Check current price at Farmer-Helper
Farmer-Helper FH-EF105 flail mowerFlail mower

Farmer-Helper

FH-EF105

41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.

$1,547checked November 14, 2026
Check current price at Farmer-Helper
Farmer-Helper FH-EF125 flail mowerFlail mower

Farmer-Helper

FH-EF125

48″ cutting width, inches · 20–45 PTO hp on the product page; manual lists the 20-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.

$1,632checked November 14, 2026
Check current price at Farmer-Helper

10 more possible options in the full comparison table — see all.

7 ruled out by published specs
Scope of this guide1800E U.S. 2020/2023 brochure scope · 3-range HST · 4WD · folding ROPS. Each configuration below states the model and equipment covered by its sources.

Compare each attachment with the correct engine or PTO rating, then verify the HST tractor’s actual rear equipment.

  • The BX36S 30-hp ceiling is engine-based, so 34.5 exceeds it. WC46’s 30-hp ceiling is PTO-based, and 27.6 remains inside its range.
  • Fixed FM-62 and FM-62H hammer mowers share a 55-inch cut and 24–45 PTO-hp band; hydraulic side shift adds different outlet and load checks.
  • FM-54 Y ends at 25 PTO hp while FM-78 hammers start at 30, placing this 27.6-hp configuration between those two mower ranges.

Choose the exact configuration.

1800E U.S. 2020/2023 brochure scope · 3-range HST · 4WD · folding ROPS

27.6 PTO hp

North American 1835E from the retained 1800E generation in manufacturer brochures MF20B008DS (2020) and MF23B005FC (2023), using only the three-range hydrostatic transmission entry, 4WD and folding ROPS. This is a document-scoped profile rather than a serial-range certification. Excludes the other transmission, current 1E successors, aftermarket cab assumptions and installed loader/backhoe package assumptions.

Engine power
34.5 hp · 2023 U.S. brochure labels rated engine power at 2,600 rpm; 2020 table says engine HP at 2,600 rpm. Gross versus net and SAE/ISO test standard were not verified in the reviewed manufacturer-hosted documents. Do not relabel this figure as verified gross power.
Rear hitch
Category I
Lift at 24 inches
1,598 lb · 2020 U.S. brochure MF20B008DS p 7 explicitly gives 1,598 lb at 24 inches behind ball ends. 2023 brochure repeats 2,205 lb at ball ends but omits the at 24-inch row; exact serial applicability remains unverified.
Lift at link ends
2,205 lb
Hydraulics
Open center with separate gear-type pumps: 7.6 gpm implement and 3.8 gpm steering in both U.S. brochures. A combined total is not printed in these tables, and actual rear-coupler flow remains unverified.
Pressure
Not verified in the reviewed exact-generation manufacturer sources.
Find attachments for this tractor

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Massey Ferguson U.S. E Series brochure MF20B008DS, copyright 2020 — pp 2–7
  2. Massey Ferguson U.S. E Series brochure MF23B005FC, copyright 2023 — p 11 specifications
  3. Massey Ferguson current U.S. E Series page — 1E/2E versus previous 1800E generation
  4. Massey Ferguson U.S. Service & Information — operator-manual access
  5. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  6. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  7. Official FM-54 page: Y option, displayed price, shaft and weight
  8. FM-54 manual for 2025-and-newer models, p40 specifications
  9. Current manual index: FM-54 under Models 2025 to current
  10. Official FM-62H page: hammer option, price, equipment and conflicting weights
  11. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41 specifications
  12. Official FM-62 page: exact hammer variant, price and equipment
  13. Official FM-78 page: exact hammer variant, price and equipment
  14. Official MX-9900 page: power/capacity claims, feed, hitch and current sale price
  15. MX-9900 manual Rev C, September 18, 2026: specifications and setup
  16. Wallenstein official U.S. BX36S page — explicit engine band, capacity, RPM label, reference weight and accessories
  17. Wallenstein BX36S support — currently linked operator, setup and shaft documents
  18. BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,28,30,40
  19. PTO shaft installation Z97844_En, Rev Aug-2024 — p6 sizing with a quick hitch attached
  20. BX-S setup instructions Z97085_SI, Rev Feb-2019 — assembly and shipment handling
  21. Wallenstein official U.S. BX52S page — explicit engine band, capacity, RPM label, reference weight and accessories
  22. Wallenstein BX52S support — currently linked operator, setup and shaft documents

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.