Massey Ferguson · COMPACT TRACTOR ATTACHMENTS

Massey Ferguson MF 1M.35
Attachments that fit.

The MF 1M.35 has a turbocharged 36.2-hp Iseki, a 2,535-lb lift at 24 inches and two PTO ratings: 27.5 hp with the 12x12 power shuttle and 25.7 with the Servo-HST. Both are over WoodMaxx FM-54 Y’s 25-hp ceiling and short of FM-78’s 30.

25.7–27.5PTO hp36.2engine hp1hitch category2,535lb lift at 24 in.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Massey Ferguson MF 1M.35 hub: MF 1M-series cab tractor with front loader (representative M Series photo; exact model not identified)
Manufacturer photo · Massey Ferguson · representative series photo

PTO WOOD CHIPPERS FOR THE MF 1M.35

Chippers that fit the MF 1M.35.

13 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. “Specs line up” cards come first.

WoodMaxx MX-9900 PTO wood chipperPTO chipper

WoodMaxx

MX-9900

9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$6,990checked November 7, 2026
Check current price at WoodMaxx
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$2,392checked November 7, 2026
Check current price at Farmer-Helper
Farmer-Helper FH-BX42 PTO wood chipperPTO chipper

Farmer-Helper

FH-BX42

4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$1,683checked November 7, 2026
Check current price at Farmer-Helper

7 more possible options in the full comparison table.

6 ruled out by published specs

FLAIL MOWERS FOR THE MF 1M.35

Flail mowers that fit the MF 1M.35.

16 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmry LFP47 flail mowerFlail mower

Farmry

LFP47

47.2″ cutting width, inches · 25–45 hp · basis unclear

Gear: Possible — confirm detailsHST: Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$2,199checked November 7, 2026
Check current price at Farmry

10 more possible options in the full comparison table — see all.

7 ruled out by published specs
Scope of this guideU.S. MF 1M.35 · 12x12 power shuttle · 4WD · ROPS · independent PTO / U.S. MF 1M.35 · 3-range Servo-HST · 4WD · ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

WoodMaxx FM-62, Farmer-Helper FH-EFGC and Farmry LFP47 are the flails that fit; Woodland Mills WC68, WoodMaxx’s 8- and 9-inch chippers and FH-BX62S fit for chipping.

  • Spec sheet and page: 36.2 hp; 27.5 PTO hp (mechanical), 25.7 (HST); Category 1.
  • Lift: 2,535 lb at 24 inches; 2,800 lb at the lift points.
  • WoodMaxx FM-54 Y (to 25 PTO hp): 2.5 / 0.7 over.
  • WoodMaxx FM-78 (from 30): 2.5 / 4.3 short.
  • Wallenstein BX36S (to 30 engine hp): 6.2 over.
  • 3,472 lb ROPS on the sheet (3,428 on the page).

Choose the exact configuration.

U.S. MF 1M.35 · 12x12 power shuttle · 4WD · ROPS · independent PTO

27.5 PTO hp

Current U.S. Massey Ferguson MF 1M.35 from the November 2025 1M Series spec sheet and the current M Series page. Base weight 3,472 lb ROPS (3,428 on the page), 3,858–3,869 lb cab; 67.5 in. minimum width.

Engine power
36.2 hp · 36.2 hp rated engine power at 2,600 rpm in the November 2025 spec sheet and on the current M Series page; Massey Ferguson does not label it gross or net. It is not PTO power.
Rear hitch
Category 1
Lift at 24 inches
2,535 lb · 2,535 lb 3-point lift capacity 24 in. behind the lift point in the spec sheet; 2,800 lb at the lift points.
Lift at link ends
2,800 lb
Hydraulics
See the spec sheet; not used in this screen.
Pressure
Not published in the reviewed spec sheet.
Find attachments for this tractor

U.S. MF 1M.35 · 3-range Servo-HST · 4WD · ROPS · independent PTO

25.7 PTO hp

Current U.S. Massey Ferguson MF 1M.35 from the November 2025 1M Series spec sheet and the current M Series page. Base weight 3,472 lb ROPS (3,428 on the page), 3,858–3,869 lb cab; 67.5 in. minimum width.

Engine power
36.2 hp · 36.2 hp rated engine power at 2,600 rpm in the November 2025 spec sheet and on the current M Series page; Massey Ferguson does not label it gross or net. It is not PTO power.
Rear hitch
Category 1
Lift at 24 inches
2,535 lb · 2,535 lb 3-point lift capacity 24 in. behind the lift point in the spec sheet; 2,800 lb at the lift points.
Lift at link ends
2,800 lb
Hydraulics
See the spec sheet; not used in this screen.
Pressure
Not published in the reviewed spec sheet.
Find attachments for this tractor

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Massey Ferguson MF 1M Series spec sheet (PDF created November 6, 2025)p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight
  2. Massey Ferguson MF M Series current U.S. pageModel comparison table: rated engine power (HP), PTO (HP) by transmission, rear lift capacity @24" behind (LBS), machine weight
  3. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  4. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  5. Official LFP47 product page: configuration, weight and price
  6. LFP Series operator manual, Rev 1.3, printed pp17–20
  7. Official FM-54 page: Y option, displayed price, shaft and weight
  8. FM-54 manual for 2025-and-newer models, p40 specifications
  9. Current manual index: FM-54 under Models 2025 to current
  10. Official FM-62 page: exact hammer variant, price and equipment
  11. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  12. Official MX-9900 page: power/capacity claims, feed, hitch and current sale price
  13. MX-9900 manual Rev C, September 18, 2026: specifications and setup
  14. Official Betstco FH-EFGC155 product page: exact model, current USD offer, dimensions and conflicting specifications
  15. Currently linked EFGC standard manual, Revision 12-12-17, pp16–23
  16. Official EFGC series: fixed models and separate hydraulic-offset kits
  17. Official Betstco manual index
  18. Official current FH-BX62S product page: exact SKU, USD price and conflicting power/weight text
  19. Official FH-BX62S series page: self feed and current-manual link
  20. Current index-linked FH-BX42 & 62 manual, printed p2 / PDF p3
  21. Product-linked older manual, Revision 1-3-2018, p38

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.