Massey Ferguson MF 2E.50 · FLAIL MOWERS
The 2E.50’s 48.8 rated engine hp is 0.2 short of Land Pride FM2584’s 49-hp minimum, so the 84-inch mower is out on any reading. FM2572 (42 hp) is inside on engine power and short on every PTO figure. WoodMaxx FM-78 and Farmer-Helper FH-EFGC155 are inside their PTO ranges on every figure, and Farmry LFP47 depends on the basis.
By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test
PUT THIS GUIDE TO WORK
See published mismatches and the checks still needed.
BEST MATCHES FOR THE MF 2E.50
17 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.
Flail mowerLand Pride
72″ cutting width · 42–80 tractor hp · engine/PTO basis unspecified
Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
Flail mowerLand Pride
60″ cutting width · 33–80 tractor hp · engine/PTO basis unspecified
Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
Flail mowerWoodMaxx
70″ cutting width, inches · 30–65 PTO hp · Hammer blades only
Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
Flail mowerWoodMaxx
70″ cutting width, inches · 30–65 PTO hp · Hammer blades only
Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
Flail mowerFarmer-Helper
60″ cutting width, inches · 25–65 PTO hp on current page; linked-manual basis/limit conflicts
Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
Flail mowerWoodMaxx
55″ cutting width, inches · 24–45 PTO hp · Hammer blades only
Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.
11 more possible options in the full comparison table.
THE DECISION IN NUMBERS
Tractor reference: MF 2E.50, Mech / HST; Cat 1 & 2 (table); 70.1 in. minimum width; 2,425 lb at 24 in. No Massey Ferguson manual flail limit was reviewed.
Scroll the table sideways on smaller screens.
| Mower | Published requirement | Result on the PTO figures | Result on 48.8 engine hp |
|---|---|---|---|
| Farmry HFS87 | 30–85 hp, basis unspecified; Category I/II; 87-in. cut | Inside | Inside |
| Farmer-Helper FH-EF95 / EF105 / EF125 | 15 / 16 / 20–45 PTO hp; Category I; 37 / 41 / 48-in. cut | Inside | PTO-rated: engine hp not used |
| Land Pride FM2584 (hammer) | 49–80 hp, basis unspecified; 84-in. cut | All below | 0.2 below: excluded |
| Land Pride FM2572 (hammer) | 42–80 hp, basis unspecified; 72-in. cut | 0.6 to 6.8 below | 6.8 above |
| Land Pride FM2560 (hammer) | 33–80 hp, basis unspecified | Inside | Inside |
| WoodMaxx FM-78 hammer / FM-78H | 30–65 PTO hp; 70-in. cut | Inside (+5.2 to +11.4) | PTO-rated |
| Farmer-Helper FH-EFGC155 | 25–65 PTO hp (page); 60-in. cut | Inside | PTO-rated |
| WoodMaxx FM-62 hammer | 24–45 PTO hp; 55-in. cut | Inside (3.6 to 9.8 under max) | PTO-rated |
| Farmry LFP47 | 25–45 hp, basis unspecified | Inside | 3.8 over: excluded |
| Farmry LFS series | 15–35 hp, basis unspecified | Over on every figure (HST web by 0.2) | Excluded |
Land Pride rates FM2584 at 49–80 hp without naming engine or PTO power. The 2E.50’s highest published figure is 48.8 rated engine hp, 0.2 short, and every PTO figure is lower. Unless Massey Ferguson publishes a higher rating for the tractor on offer, FM2584 is not a choice on the 2E.50; the 2E.60, at 57.3 rated engine hp, clears it on engine power.
FM2572 (42–80 hp) is cleared by 6.8 on engine power. On PTO power it is missed by 0.6 (Mech web) to 6.8 (HST web). Ask Land Pride which figure its 42 means. Farmer-Helper’s FH-EFGC155, rated 25–65 PTO hp on Betstco’s page, is inside on every 2E.50 figure; the comparison below sets the two mowers side by side.
The 2E.50 is 70.1 inches at minimum width. WoodMaxx FM-78 (70 inches) and FM2572 (72) roughly match it; FH-EFGC155 (60) and FM-62 (55) are narrower and will not cover both rear tires at minimum width. FM2572 is 84 inches overall, so check gates.
Farmry LFS (15–35 hp) is over on every figure except the HST web figure (35.2 is 0.2 over too), so the LFS mowers are out. LFP47 (25–45 hp) is inside on every PTO figure and 3.8 over on engine power, so its basis decides.
Farmry rates the HFS87 at 30–85 hp without saying whether that is PTO or engine power, lists Category I and II, cuts 87 inches and weighs 1,299 lb with the shaft. The Massey Ferguson MF 2E.50’s 40.7 / 38.5 PTO hp and 48.8 engine hp are both inside that range, so the basis does not change the result. Its published lift at 24 inches, 2,425 lb, carries that weight with 1,126 lb to spare; check front ballast all the same. Its gearbox rating, 50 hp, is not below this tractor’s PTO power. The 87-inch cut is 3 inches wider than Land Pride’s FM2584. Farmry’s page listed it at $4,499 on November 14, 2026.
Farmer-Helper rates its standard-duty FH-EF mowers by PTO power, all to 45 PTO hp with a 45-hp gearbox: the EF95 (37-inch cut) from 15, the EF105 (41-inch) from 16 and the EF125 (48-inch) from 20. They carry Y-blades for grass and light brush. The Massey Ferguson MF 2E.50’s 40.7 / 38.5 PTO hp is inside all three. Its published lift at 24 inches, 2,425 lb, carries even the 390-lb EF125 with 2,035 lb to spare. This tractor has the power for heavier mowers; the FH-EF line suits grass and light growth, not thick brush. Betstco listed them at $1,462, $1,547 and $1,632 on November 14, 2026, with the PTO shaft included.
THE SCREEN, WITH ITS LIMITS VISIBLE
No pairing below is manufacturer-confirmed. “Preliminary” still requires implement limits, load center, ballast, hitch geometry and shaft checks.
Initial specification screen only. Scroll the table on small screens. Read the product page for every remaining check.
| Attachment | U.S. 8x8 synchro shuttle · 4WD · ROPS · independent PTO40.7 PTO hp | U.S. 3-range HST · 4WD · ROPS · independent PTO38.5 PTO hp |
|---|---|---|
| Farmry LFS45 →355 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18 | Published mismatchBoth engine (48.8) and PTO (40.7) horsepower exceed the published 35 hp maximum. | Published mismatchBoth engine (48.8) and PTO (38.5) horsepower exceed the published 35 hp maximum. |
| Farmry LFS53 →395 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18 | Published mismatchBoth engine (48.8) and PTO (40.7) horsepower exceed the published 35 hp maximum. | Published mismatchBoth engine (48.8) and PTO (38.5) horsepower exceed the published 35 hp maximum. |
| Farmry LFS61 →421 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18 | Published mismatchBoth engine (48.8) and PTO (40.7) horsepower exceed the published 35 hp maximum. | Published mismatchBoth engine (48.8) and PTO (38.5) horsepower exceed the published 35 hp maximum. |
| TMG Industrial TMG-TFM60 →650 lb · Product-page operation weight; manual gives conflicting 270 kg (about 595 lb) | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| Farmry LFP47 →464 lb · 464 lb including PTO shaft on the product page; current Rev 1.3 manual lists 210 kg / 463.7 lb. Shipping weight is a separate 671 lb. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| TMG Industrial TFMS50 →660 lb · Product-page operation weight: 660 lb. Manual structure weight: 300 kg (about 661 lb); shaft and fluid inclusion are not explicit. Shipping weight: 770 lb. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| WoodMaxx FM-54 · Y-blades →408 lb · Current 2025-and-newer manual p40 lists 408 lb product weight without stating shaft inclusion. Page instead says 410 lb mower-only plus a 39 lb shaft. Do not treat 408 lb as a verified complete operating assembly; confirm delivered Y-blade weight. Shipping page figure is 500 lb. | Published mismatch40.7 PTO hp exceeds the published 25 hp range. | Published mismatch38.5 PTO hp exceeds the published 25 hp range. |
| WoodMaxx FM-62H · Hammer blades →860 lb · Current 2025-and-newer manual, printed p40 / PDF p41: 860 lb product weight; shaft/oil/packaging inclusion is unstated. Page instead lists 716 lb mower-only plus a 39 lb shaft. Shipping is separately labeled 860 lb. Do not treat the manual number as verified complete operating weight; confirm delivered hammer assembly. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| WoodMaxx FM-78H · Hammer blades →968 lb · Current 2025-and-newer manual, printed p40 / PDF p41: 968 lb product weight; shaft/oil/packaging inclusion is unstated. Page instead lists 804 lb mower-only plus a 39 lb shaft. Shipping is separately labeled 1000 lb. Do not treat the manual number as verified complete operating weight; confirm delivered hammer assembly. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| WoodMaxx FM-62 · Hammer blades →774 lb · Current 2025-and-newer manual printed p40 / PDF p41 lists 774 lb product weight without shaft/oil/packaging inclusion. Page lists 641 lb mower-only plus a 39 lb shaft; shipping is separately labeled 800 lb. Retain these distinct bases and confirm complete operating weight for the delivered hammer assembly. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| WoodMaxx FM-78 · Hammer blades →880 lb · Current 2025-and-newer manual printed p40 / PDF p41 lists 880 lb product weight without shaft/oil/packaging inclusion. Page lists 710 lb mower-only plus a 39 lb shaft; shipping is separately labeled 900 lb. Retain these distinct bases and confirm complete operating weight for the delivered hammer assembly. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| Farmer-Helper FH-EFGC125 · Hammer blades →Operating weight unconfirmed · Complete operating weight is unverified. Current page: 576 lb “Weight” and 624 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 600 lb “Weight” and 635 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| Farmer-Helper FH-EFGC155 · Hammer blades →Operating weight unconfirmed · Complete operating weight is unverified. Current page: 741 lb “Weight” and 789 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 720 lb “Weight” and 755 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| WoodMaxx FM-62 · Y-blades →Operating weight unconfirmed · Complete Y-configuration operating weight is unverified. Current manual p40 gives 774 lb generic product weight without shaft/oil or blade-specific inclusion. Page gives 641 lb mower-only plus 39 lb shaft and separately 800 lb shipping. These bases conflict or lack scope; none substitutes for an assembled Y operating load. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| WoodMaxx FM-78 · Y-blades →Operating weight unconfirmed · Complete Y-configuration operating weight is unverified. Current manual p40 gives 880 lb generic product weight without shaft/oil or blade-specific inclusion. Page gives 710 lb mower-only plus 39 lb shaft and separately 900 lb shipping. These bases conflict or lack scope; none substitutes for an assembled Y operating load. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| Land Pride FM2560 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 965 lb for the standard unit with a duckfoot rotor; the brochure lists 929 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 222 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| Land Pride FM2572 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 1,040 lb for the standard unit with a duckfoot rotor; the brochure lists 1,040 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 261 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| Land Pride FM2584 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 1,236 lb for the standard unit with a duckfoot rotor; the brochure lists 1,168 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 301 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load. | Published mismatchBoth engine (48.8) and PTO (40.7) horsepower are below the published 49 hp minimum. | Published mismatchBoth engine (48.8) and PTO (38.5) horsepower are below the published 49 hp minimum. |
| Blue Diamond Heavy Duty 403740 →1763 lb · 1,763 lb (800 kg) in the Aug-2025 spec sheet (without PTO) and the Feb-2026 manual p49. Add the PTO shaft for the operating load. | Published mismatchBoth engine (48.8) and PTO (40.7) horsepower are below the published 75 hp minimum. | Published mismatchBoth engine (48.8) and PTO (38.5) horsepower are below the published 75 hp minimum. |
| Farmry HFS87 →1299 lb · 1,299 lb (589 kg) including PTO shaft on the product page and in the HFS manual Rev 1.6, printed p17. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| Farmer-Helper FH-EF95 →330 lb · 330 lb retained, the heavier of the product page (325 lb) and the FH-EF manual p13 (330 lb); crated 360 lb. Neither says whether the included PTO shaft is counted. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| Farmer-Helper FH-EF105 →347 lb · 347 lb retained, the heavier of the product page (342 lb) and the FH-EF manual p13 (347 lb); crated 377 lb. Neither says whether the included PTO shaft is counted. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
| Farmer-Helper FH-EF125 →390 lb · 390 lb retained, the heavier of the product page (390 lb) and the FH-EF manual p13 (383 lb); crated 438 lb. Neither says whether the included PTO shaft is counted. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. | Needs specification reviewConfirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility. |
With about 40 PTO and 49 engine hp, should I buy FH-EFGC155 or FM2572?
Read the guide →FIELD GUIDETake the complete setup, not just a horsepower number, to the manufacturer.
Read the guide →FOLLOW THE NUMBERS
Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.